lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/2] dt-bindings: iio: accel: add ADXL367
On Tue, 7 Dec 2021 09:58:16 +0200
Cosmin Tanislav <demonsingur@gmail.com> wrote:

> On 12/6/21 21:31, Cosmin Tanislav wrote:
> >
> >
> > On 12/6/21 16:39, Jonathan Cameron wrote:
> >> On Mon,  6 Dec 2021 12:54:02 +0200
> >> Cosmin Tanislav <demonsingur@gmail.com> wrote:
> >>
> >>> The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
> >>>
> >>> The ADXL367 does not alias input signals to achieve ultralow power
> >>> consumption, it samples the full bandwidth of the sensor at all
> >>> data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
> >>> with a resolution of 0.25mg/LSB on the +-2 g range.
> >>>
> >>> In addition to its ultralow power consumption, the ADXL367
> >>> has many features to enable true system level power reduction.
> >>> It includes a deep multimode output FIFO, a built-in micropower
> >>> temperature sensor, and an internal ADC for synchronous conversion
> >>> of an additional analog input.
> >>>
> >>> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
> >>
> >> Hi Cosmin,
> >>
> >> Given how often we get patches later to add regulators for devices like
> >> these I'd like them supported from the start.
> >>
> >> I'm guessing it needs power, but how many supplies? I'm not sure as
> >> doesn't
> >> seem to be a public datasheet yet.
> >
> > I'll add them. For the note, it has two supplies, one being the main one
> > and another one for the io.
> >
>
> One question I have is whether I should disable the regulators on system
> suspend. If I do, I should also use a regmap cache so I can re-apply all
> registers on resume...

Ideally yes, but often first implementation just turns them off on probe / remove.
Can add fancy stuff later :)

Jonathan

>
> >>
> >>> ---
> >>>   .../bindings/iio/accel/adi,adxl367.yaml       | 79 +++++++++++++++++++
> >>>   1 file changed, 79 insertions(+)
> >>>   create mode 100644
> >>> Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> >>>
> >>> diff --git
> >>> a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> >>> b/Docu`mentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> >>> new file mode 100644
> >>> index 000000000000..1bf9e1602480
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> >>> @@ -0,0 +1,79 @@
> >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>> +%YAML 1.2
> >>> +---
> >>> +$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
> >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>> +
> >>> +title: Analog Devices ADXL367 3-Axis Digital Accelerometer
> >>> +
> >>> +maintainers:
> >>> +  - Cosmin Tanislav <cosmin.tanislav@analog.com>
> >>> +
> >>> +description: |
> >>> +  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
> >>> +
> >>> +  The ADXL367 does not alias input signals by to achieve ultralow power
> >>> +  consumption, it samples the full bandwidth of the sensor at all
> >>> +  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
> >>> +  with a resolution of 0.25mg/LSB on the +-2 g range.
> >>> +
> >>> +  In addition to its ultralow power consumption, the ADXL367
> >>> +  has many features to enable true system level power reduction.
> >>> +  It includes a deep multimode output FIFO, a built-in micropower
> >>> +  temperature sensor, and an internal ADC for synchronous conversion
> >>> +  of an additional analog input.
> >>> +    https://www.analog.com/en/products/adxl367.html
> >>
> >> "We can't find that page". I guess this driver is running slightly ahead
> >> of the datasheet being made public.
> >
> > Yeah, the datasheet and product page isn't out yet.
> >
> >>
> >>> +
> >>> +properties:
> >>> +  compatible:
> >>> +    enum:
> >>> +      - adi,adxl367
> >>> +
> >>> +  reg:
> >>> +    maxItems: 1
> >>> +
> >>> +  interrupts:
> >>> +    maxItems: 1
> >>
> >> spi-max-frequency: true
> >>
> >> to fix the issue Rob's bot reported.
> >>
> >>> +
> >>> +required:
> >>> +  - compatible
> >>> +  - reg
> >>> +  - interrupts
> >>> +
> >>> +additionalProperties: false
> >>> +
> >>> +examples:
> >>> +  - |
> >>> +    #include <dt-bindings/gpio/gpio.h>
> >>> +    #include <dt-bindings/interrupt-controller/irq.h>
> >>> +
> >>> +    i2c {
> >>> +      #address-cells = <1>;
> >>> +      #size-cells = <0>;
> >>> +
> >>> +      adxl367@53 {
> >>> +        compatible = "adi,adxl367";
> >>> +        reg = <0x53>;
> >>> +        interrupt-parent = <&gpio>;
> >>> +        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
> >>> +      };
> >>> +    };
> >>> +  - |
> >>> +    #include <dt-bindings/gpio/gpio.h>
> >>> +    #include <dt-bindings/interrupt-controller/irq.h>
> >>> +
> >>> +    spi {
> >>> +      #address-cells = <1>;
> >>> +      #size-cells = <0>;
> >>> +
> >>> +      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> >>> +      status = "okay";
> >>
> >> We don't normally list status in example bindings.
> >> Also, the cs-gpio is part of the spi master binding
> >> so no need to have it here as we are showing how the
> >> actual device binding works.
> >>
> >> That should let you drop the gpio.h header.
> >>
> > Interestingly, you forgot to say this for my AD74413R driver.
> >
> >>
> >>> +
> >>> +      adxl367@0 {
> >>> +        compatible = "adi,adxl367";
> >>> +        reg = <0>;
> >>> +        spi-max-frequency = <1000000>;
> >>> +        interrupt-parent = <&gpio>;
> >>> +        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
> >>> +      };
> >>> +    };
> >>

\
 
 \ /
  Last update: 2021-12-07 10:27    [W:0.101 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site