lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 00/11] Apple SoC PMGR device power states driver
On Tue, Dec 07, 2021 at 08:53:33AM +0100, Krzysztof Kozlowski wrote:
> On 07/12/2021 06:30, Hector Martin wrote:
> > On 24/11/2021 16.34, Hector Martin wrote:
> >> This series adds the driver for the Apple PMGR device power state
> >> registers. These registers can clockgate and (in some cases) powergate
> >> specific SoC blocks. They also control the reset line, and can have
> >> additional features such as automatic power management.
> >>
> >> The current driver supports only the lowest/highest power states,
> >> provided via the genpd framework, plus reset support provided via
> >> the reset subsystem.
> >>
> >> Apple's PMGRs (there are two in the T8103) have a uniform register
> >> bit layout (sometimes with varying features). To be able to support
> >> multiple SoC generations as well as express pd relationships
> >> dynamically, this binding describes each PMGR power state control
> >> as a single devicetree node. Future SoC generations are expected to
> >> retain backwards compatibility, allowing this driver to work on them
> >> with only DT changes.
> >>
> >> #1: MAINTAINERS updates, to go via the SoC tree to avert merge hell
> >> #2-#5: Adds power-domains properties to existing device bindings
> >> #6-#7: Adds the new pmgr device tree bindings
> >> #8: The driver itself.
> >> #9: Instantiates the driver in t8103.dtsi. This adds the entire PMGR
> >> node tree and references the relevant nodes from existing devices.
> >> #7: Adds runtime-pm support to the Samsung UART driver, as a first
> >> working consumer.
> >> #8: Instantiates a second UART, to more easily test this.
> >>
> >> There are currently no consumers for the reset functionality, so
> >> it is untested, but we will be testing it soon with the NVMe driver
> >> (as it is required to allow driver re-binding to work properly).
> >>
> >> == Changes since v2 ==
> >> - DT schema review comments & patch order fix
> >> - Added the power-domains properties to devices that already mainlined
> >> - Now adds the entire PMGR tree. This turns off all devices we do not
> >> currently instantiate, and adds power-domains to those we do. The
> >> nodes were initially generated with [1] and manually tweaked. all
> >> the labels match the ADT labels (lowercased), which might be used
> >> by the bootloader in the future to conditionally disable nodes
> >> based on hardware configuration.
> >> - Dropped apple,t8103-minipmgr, since I don't expect we will ever need
> >> to tell apart multiple PMGR instances within a SoC, and added
> >> apple,t6000-pmgr{-pwrstate} for the new SoCs.
> >> - Driver now unconditionally enables auto-PM for all devices. This
> >> seems to be safe and should save power (it is not implemented for
> >> all devices; if not implemented, the bit just doesn't exist and is
> >> ignored).
> >> - If an always-on device is not powered on at boot, turn it on and
> >> print a warning. This avoids the PM core complaining. We still
> >> want to know if/when this happens, but let's not outright fail.
> >> - Other minor fixes (use PS names instead of offsets for messages,
> >> do not spuriously clear flag bits).
> >>
> >> On the way the parent node is handled: I've decided that these syscon
> >> nodes will only ever contain pwrstates and nothing else. We now size
> >> them based on the register range that contains pwrstate controls
> >> (rounded up to page size). t6000 has 3 PMGRs and t6001 has 4, and
> >> we shouldn't have to care about telling apart the multiple instances.
> >> Anything else PMGR does that needs a driver will be handled by
> >> entirely separate nodes in the future.
> >>
> >> Re t6001 and t6000 (and the rumored t6002), t6000 is basically a
> >> cut-down version of t6001 (and t6002 is rumored to be two t6001
> >> dies), down to the die floorplan, so I'm quite certain we won't need
> >> t6001/2-specific compatibles for anything shared. The t6000 devicetree
> >> will just #include the t6001 one and remove the missing devices.
> >> Hence, everything for this SoC series is going to have compatibles
> >> named apple,t6000-* (except the extra instances of some blocks in
> >> t6001 which look like they may have differences; PMGR isn't one of
> >> them, but some multimedia stuff might).
> >>
> >> [1] https://github.com/AsahiLinux/m1n1/blob/main/proxyclient/tools/pmgr_adt2dt.py
> >>
> >> Hector Martin (11):
> >> MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE
> >> dt-bindings: i2c: apple,i2c: Add power-domains property
> >> dt-bindings: iommu: apple,dart: Add power-domains property
> >> dt-bindings: pinctrl: apple,pinctrl: Add power-domains property
> >> dt-bindings: interrupt-controller: apple,aic: Add power-domains
> >> property
> >> dt-bindings: power: Add apple,pmgr-pwrstate binding
> >> dt-bindings: arm: apple: Add apple,pmgr binding
> >> soc: apple: Add driver for Apple PMGR power state controls
> >> arm64: dts: apple: t8103: Add PMGR nodes
> >> tty: serial: samsung_tty: Support runtime PM
> >> arm64: dts: apple: t8103: Add UART2
> >>
> >> .../bindings/arm/apple/apple,pmgr.yaml | 134 ++
> >> .../devicetree/bindings/i2c/apple,i2c.yaml | 3 +
> >> .../interrupt-controller/apple,aic.yaml | 3 +
> >> .../devicetree/bindings/iommu/apple,dart.yaml | 3 +
> >> .../bindings/pinctrl/apple,pinctrl.yaml | 3 +
> >> .../bindings/power/apple,pmgr-pwrstate.yaml | 71 ++
> >> MAINTAINERS | 3 +
> >> arch/arm64/boot/dts/apple/t8103-j274.dts | 5 +
> >> arch/arm64/boot/dts/apple/t8103-pmgr.dtsi | 1136 +++++++++++++++++
> >> arch/arm64/boot/dts/apple/t8103.dtsi | 36 +
> >> drivers/soc/Kconfig | 1 +
> >> drivers/soc/Makefile | 1 +
> >> drivers/soc/apple/Kconfig | 21 +
> >> drivers/soc/apple/Makefile | 2 +
> >> drivers/soc/apple/apple-pmgr-pwrstate.c | 317 +++++
> >> drivers/tty/serial/samsung_tty.c | 93 +-
> >> 16 files changed, 1798 insertions(+), 34 deletions(-)
> >> create mode 100644 Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
> >> create mode 100644 Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
> >> create mode 100644 arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
> >> create mode 100644 drivers/soc/apple/Kconfig
> >> create mode 100644 drivers/soc/apple/Makefile
> >> create mode 100644 drivers/soc/apple/apple-pmgr-pwrstate.c
> >>
> >
> > Applied everything except the samsung_tty change to asahi-soc/dt (DT
> > changes) and asahi-soc/pmgr (just the driver). Thanks everyone for the
> > reviews!
> >
> > Krzysztof: feel free to take that patch through tty if you think it's in
> > good shape. I'm not sure how much power UART runtime-pm will save us,
> > but at least it's a decent test case, so it's probably worth having.
>
> The tty/serial driver change goes via Greg's tree.

I'll be glad to take it if you ack it :)

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-12-07 09:06    [W:0.075 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site