lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: apple: t8103: Remove PCIe max-link-speed properties
Date
The driver doesn't support these, they shouldn't be in the SoC include
anyway, and we're now configuring this in the bootloader instead. This
also solves the j274 1G/10G Ethernet variant discrepancy, since that
will now be configured properly based on the dynamic ADT property.

Signed-off-by: Hector Martin <marcan@marcan.st>
---
arch/arm64/boot/dts/apple/t8103.dtsi | 3 ---
1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 15ee8c8c5fa0..8d1628e0b0c7 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -412,7 +412,6 @@ port00: pci@0,0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 152 0>;
- max-link-speed = <2>;

#address-cells = <3>;
#size-cells = <2>;
@@ -432,7 +431,6 @@ port01: pci@1,0 {
device_type = "pci";
reg = <0x800 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 153 0>;
- max-link-speed = <2>;

#address-cells = <3>;
#size-cells = <2>;
@@ -452,7 +450,6 @@ port02: pci@2,0 {
device_type = "pci";
reg = <0x1000 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 33 0>;
- max-link-speed = <1>;

#address-cells = <3>;
#size-cells = <2>;
--
2.33.0
\
 
 \ /
  Last update: 2021-12-07 06:36    [W:0.146 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site