lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: selftests/net/fcnal-test.sh: ipv6_ping test failed
Date
hi,

man ip, the output about exit value is like following.
"Exit status is 0 if command was successful, and 1 if there is a syntax error. If an error was reported by the kernel exit status is 2."
Did the following COMMAND have syntax error? If not, should I still change the expected rc from 2 to 1?

#######################################################
HINT: Fails since VRF device does not support linklocal or multicast

COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red
ping: sendmsg: Network is unreachable
PING fe80::7c4c:bcff:fe66:a63a%red(fe80::7c4c:bcff:fe66:a63a%red) 56 data bytes

--- fe80::7c4c:bcff:fe66:a63a%red ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms

TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL]

#######################################################
HINT: Fails since VRF device does not support linklocal or multicast

COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 ff02::1%red
ping: sendmsg: Network is unreachable
PING ff02::1%red(ff02::1%red) 56 data bytes

--- ff02::1%red ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms

TEST: ping out, VRF bind - multicast IP [FAIL]

#######################################################

best regards,

________________________________________
From: David Ahern <dsahern@gmail.com>
Sent: Wednesday, December 8, 2021 11:20 AM
To: Jakub Kicinski; lizhijian@fujitsu.com
Cc: Zhou, Jie2X; davem@davemloft.net; shuah@kernel.org; netdev@vger.kernel.org; linux-kselftest@vger.kernel.org; linux-kernel@vger.kernel.org; Li, Philip; lkp; Ma, XinjianX; Li, ZhijianX
Subject: Re: selftests/net/fcnal-test.sh: ipv6_ping test failed

On 12/7/21 8:58 AM, Jakub Kicinski wrote:
> Adding David and Zhijian.
>
> On Tue, 7 Dec 2021 07:07:40 +0000 Zhou, Jie2X wrote:
>> hi,
>>
>> I test ipv6_ping by "./fcnal-test.sh -v -t ipv6_ping".
>> There are two tests failed.
>>
>> TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL]
>> TEST: ping out, VRF bind - multicast IP [FAIL]
>>
>> While in fcnal-test.sh the expected command result is 2, the result is 1, so the test failed.
>> ipv6_ping_vrf()
>> {
>> ......
>> for a in ${NSB_LINKIP6}%${VRF} ${MCAST}%${VRF}
>> do
>> log_start
>> show_hint "Fails since VRF device does not support linklocal or multicast"
>> run_cmd ${ping6} -c1 -w1 ${a}
>> log_test_addr ${a} $? 2 "ping out, VRF bind"
>> done
>>
>> The ipv6_ping test output is attached.
>> Did I set something wrong result that these tests failed?
>>
>> best regards,

ping6 is failing as it should. Can you send a patch to change the
expected rc from 2 to 1?

\
 
 \ /
  Last update: 2021-12-08 04:51    [W:0.323 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site