lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] CAAM Driver: re-factor and set proper JR status
Date
This V3 series covers points uncovered during the review of the previous
series, one major point being that register readout should not be used
for dynamic JR availability check due to its unreliability.

Instead, JR should have a proper status set in FDT which indicates the
availability of the ring in NS-World. This status is aligned with what
BootROM code configures, and can be modified by all actors in the boot
chain.

Therefore, patch in V2 series that was handling the dynamic JR
availability check is dropped in this series and replaced by the patch
which sets proper DT status for JR nodes.

Andrey Zhizhikin (2):
crypto: caam - convert to use capabilities
arm64: dts: imx8m: define proper status for caam jr

arch/arm64/boot/dts/freescale/imx8mm.dtsi | 4 +
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 4 +
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 +
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 +
drivers/crypto/caam/caamalg_qi.c | 2 +-
drivers/crypto/caam/ctrl.c | 115 ++++++++++++++--------
drivers/crypto/caam/intern.h | 20 ++--
drivers/crypto/caam/jr.c | 19 +++-
drivers/crypto/caam/regs.h | 2 -
9 files changed, 122 insertions(+), 52 deletions(-)


base-commit: 04fe99a8d936d46a310ca61b8b63dc270962bf01
--
2.25.1

\
 
 \ /
  Last update: 2021-12-08 00:02    [W:0.211 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site