lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: input: pwm-vibrator: Convert txt bindings to yaml
On Sat, Nov 27, 2021 at 02:09:40PM +0100, David Heidelberg wrote:
> Converts txt binding to new YAML format and simplify example.
>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
> .../bindings/input/pwm-vibrator.txt | 66 -------------------
> .../bindings/input/pwm-vibrator.yaml | 59 +++++++++++++++++
> 2 files changed, 59 insertions(+), 66 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/pwm-vibrator.txt
> create mode 100644 Documentation/devicetree/bindings/input/pwm-vibrator.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
> deleted file mode 100644
> index 88c775a3fe21..000000000000
> --- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -* PWM vibrator device tree bindings
> -
> -Registers a PWM device as vibrator. It is expected, that the vibrator's
> -strength increases based on the duty cycle of the enable PWM channel
> -(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
> -
> -The binding supports an optional direction PWM channel, that can be
> -driven at fixed duty cycle. If available this is can be used to increase
> -the vibration effect of some devices.
> -
> -Required properties:
> -- compatible: should contain "pwm-vibrator"
> -- pwm-names: Should contain "enable" and optionally "direction"
> -- pwms: Should contain a PWM handle for each entry in pwm-names
> -
> -Optional properties:
> -- vcc-supply: Phandle for the regulator supplying power
> -- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
> - nanoseconds, defaults to 50% of the channel's
> - period.
> -
> -Example from Motorola Droid 4:
> -
> -&omap4_pmx_core {
> - vibrator_direction_pin: pinmux_vibrator_direction_pin {
> - pinctrl-single,pins = <
> - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
> - >;
> - };
> -
> - vibrator_enable_pin: pinmux_vibrator_enable_pin {
> - pinctrl-single,pins = <
> - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
> - >;
> - };
> -};
> -
> -/ {
> - pwm8: dmtimer-pwm {
> - pinctrl-names = "default";
> - pinctrl-0 = <&vibrator_direction_pin>;
> -
> - compatible = "ti,omap-dmtimer-pwm";
> - #pwm-cells = <3>;
> - ti,timers = <&timer8>;
> - ti,clock-source = <0x01>;
> - };
> -
> - pwm9: dmtimer-pwm {
> - pinctrl-names = "default";
> - pinctrl-0 = <&vibrator_enable_pin>;
> -
> - compatible = "ti,omap-dmtimer-pwm";
> - #pwm-cells = <3>;
> - ti,timers = <&timer9>;
> - ti,clock-source = <0x01>;
> - };
> -
> - vibrator {
> - compatible = "pwm-vibrator";
> - pwms = <&pwm9 0 1000000000 0>,
> - <&pwm8 0 1000000000 0>;
> - pwm-names = "enable", "direction";
> - direction-duty-cycle-ns = <1000000000>;
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
> new file mode 100644
> index 000000000000..ec2466c63fe6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/input/pwm-vibrator.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: PWM vibrator
> +
> +maintainers:
> + - Sebastian Reichel <sre@kernel.org>
> +
> +description: >
> + Registers a PWM device as vibrator. It is expected, that the vibrator's
> + strength increases based on the duty cycle of the enable PWM channel
> + (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
> +
> + The binding supports an optional direction PWM channel, that can be
> + driven at fixed duty cycle. If available this is can be used to increase
> + the vibration effect of some devices.
> +
> +properties:
> + compatible:
> + const: pwm-vibrator
> +
> + pwm-names:
> + anyOf:
> + - items:
> + - const: enable
> + - items:
> + - const: enable
> + - const: direction

This can be expressed with just the 2nd entry and 'minItems: 1'.

> +
> + pwms:
> + minItems: 1
> + maxItems: 2
> +
> + vcc-supply: true
> +
> + direction-duty-cycle-ns:
> + description: >
> + Duty cycle of the direction PWM channel in nanoseconds,
> + defaults to 50% of the channel's period.
> +
> +required:
> + - compatible
> + - pwm-names
> + - pwms
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + vibrator {
> + compatible = "pwm-vibrator";
> + pwms = <&pwm9 0 1000000000 0>,
> + <&pwm8 0 1000000000 0>;
> + pwm-names = "enable", "direction";
> + direction-duty-cycle-ns = <1000000000>;
> + };
> --
> 2.33.0
>
>

\
 
 \ /
  Last update: 2021-12-07 22:13    [W:0.056 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site