lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 20/32] KVM: s390: pci: provide routines for enabling/disabling interpretation
Date
These routines will be wired into the vfio_pci_zdev ioctl handlers to
respond to requests to enable / disable a device for zPCI Load/Store
interpretation.

The first time such a request is received, enable the necessary facilities
for the guest.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
arch/s390/include/asm/kvm_pci.h | 4 ++
arch/s390/kvm/pci.c | 91 +++++++++++++++++++++++++++++++++
arch/s390/pci/pci.c | 3 ++
3 files changed, 98 insertions(+)

diff --git a/arch/s390/include/asm/kvm_pci.h b/arch/s390/include/asm/kvm_pci.h
index 3e491a39704c..5d6283acb54c 100644
--- a/arch/s390/include/asm/kvm_pci.h
+++ b/arch/s390/include/asm/kvm_pci.h
@@ -26,4 +26,8 @@ extern int kvm_s390_pci_dev_open(struct zpci_dev *zdev);
extern void kvm_s390_pci_dev_release(struct zpci_dev *zdev);
extern int kvm_s390_pci_attach_kvm(struct zpci_dev *zdev, struct kvm *kvm);

+extern int kvm_s390_pci_interp_probe(struct zpci_dev *zdev);
+extern int kvm_s390_pci_interp_enable(struct zpci_dev *zdev);
+extern int kvm_s390_pci_interp_disable(struct zpci_dev *zdev);
+
#endif /* ASM_KVM_PCI_H */
diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c
index f0e5386ff943..57cbe3827ea6 100644
--- a/arch/s390/kvm/pci.c
+++ b/arch/s390/kvm/pci.c
@@ -10,7 +10,9 @@
#include <linux/kvm_host.h>
#include <linux/pci.h>
#include <asm/kvm_pci.h>
+#include <asm/sclp.h>
#include "pci.h"
+#include "kvm-s390.h"

static struct zpci_aift aift;

@@ -118,6 +120,95 @@ int kvm_s390_pci_aen_init(u8 nisc)
return rc;
}

+int kvm_s390_pci_interp_probe(struct zpci_dev *zdev)
+{
+ if (!(sclp.has_zpci_interp && test_facility(69)))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_s390_pci_interp_probe);
+
+int kvm_s390_pci_interp_enable(struct zpci_dev *zdev)
+{
+ u32 gd;
+ int rc;
+
+ /*
+ * If this is the first request to use an interpreted device, make the
+ * necessary vcpu changes
+ */
+ if (!zdev->kzdev->kvm->arch.use_zpci_interp)
+ kvm_s390_vcpu_pci_enable_interp(zdev->kzdev->kvm);
+
+ /*
+ * In the event of a system reset in userspace, the GISA designation
+ * may still be assigned because the device is still enabled.
+ * Verify it's the same guest before proceeding.
+ */
+ gd = (u32)(u64)&zdev->kzdev->kvm->arch.sie_page2->gisa;
+ if (zdev->gd != 0 && zdev->gd != gd)
+ return -EPERM;
+
+ if (zdev_enabled(zdev)) {
+ zdev->gd = 0;
+ rc = zpci_disable_device(zdev);
+ if (rc)
+ return rc;
+ }
+
+ /*
+ * Store information about the identity of the kvm guest allowed to
+ * access this device via interpretation to be used by host CLP
+ */
+ zdev->gd = gd;
+
+ rc = zpci_enable_device(zdev);
+ if (rc)
+ goto err;
+
+ /* Re-register the IOMMU that was already created */
+ rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
+ (u64)zdev->dma_table);
+ if (rc)
+ goto err;
+
+ return rc;
+
+err:
+ zdev->gd = 0;
+ return rc;
+}
+EXPORT_SYMBOL_GPL(kvm_s390_pci_interp_enable);
+
+int kvm_s390_pci_interp_disable(struct zpci_dev *zdev)
+{
+ int rc;
+
+ if (zdev->gd == 0)
+ return -EINVAL;
+
+ /* Remove the host CLP guest designation */
+ zdev->gd = 0;
+
+ if (zdev_enabled(zdev)) {
+ rc = zpci_disable_device(zdev);
+ if (rc)
+ return rc;
+ }
+
+ rc = zpci_enable_device(zdev);
+ if (rc)
+ return rc;
+
+ /* Re-register the IOMMU that was already created */
+ rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
+ (u64)zdev->dma_table);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(kvm_s390_pci_interp_disable);
+
int kvm_s390_pci_dev_open(struct zpci_dev *zdev)
{
struct kvm_zdev *kzdev;
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 175854c861cd..0eac84387f3c 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -141,6 +141,7 @@ int zpci_register_ioat(struct zpci_dev *zdev, u8 dmaas,
zpci_dbg(3, "reg ioat fid:%x, cc:%d, status:%d\n", zdev->fid, cc, status);
return cc;
}
+EXPORT_SYMBOL_GPL(zpci_register_ioat);

/* Modify PCI: Unregister I/O address translation parameters */
int zpci_unregister_ioat(struct zpci_dev *zdev, u8 dmaas)
@@ -740,6 +741,7 @@ int zpci_enable_device(struct zpci_dev *zdev)
zpci_update_fh(zdev, fh);
return rc;
}
+EXPORT_SYMBOL_GPL(zpci_enable_device);

int zpci_disable_device(struct zpci_dev *zdev)
{
@@ -763,6 +765,7 @@ int zpci_disable_device(struct zpci_dev *zdev)
}
return rc;
}
+EXPORT_SYMBOL_GPL(zpci_disable_device);

/**
* zpci_hot_reset_device - perform a reset of the given zPCI function
--
2.27.0
\
 
 \ /
  Last update: 2021-12-07 22:00    [W:1.016 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site