lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mmc: core: Add support for the eMMC RTC feature in mmc_ops
On Mon, Dec 06, 2021 at 12:44:14PM -0800, Stephen Boyd wrote:
> Quoting Nishad Kamdar (2021-12-05 11:10:08)
> > diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> > index d63d1c735335..490372341b3b 100644
> > --- a/drivers/mmc/core/mmc_ops.c
> > +++ b/drivers/mmc/core/mmc_ops.c
> > @@ -1063,3 +1063,62 @@ int mmc_sanitize(struct mmc_card *card, unsigned int timeout_ms)
> > return err;
> > }
> > EXPORT_SYMBOL_GPL(mmc_sanitize);
> > +
> > +int mmc_set_time(struct mmc_card *card, struct mmc_host *host,
> > + u8 rtc_info_type, u64 seconds)
> > +{
> > + struct mmc_request mrq = {};
> > + struct mmc_command cmd = {};
> > + struct mmc_data data = {};
> > + struct scatterlist sg;
> > + int err = 0;
> > + u8 *data_buf;
> > +
> > + data_buf = kzalloc(512, GFP_KERNEL);
>
> Use some #define for 512 because it's used three times in here?
ok, but there is not #define for 512 as it is the variable block size
value. Hence, other functions in the same file like mmc_get_ext_csd() also use
the 512 value directly.

> > + if (!data_buf)
> > + return -ENOMEM;
> > +
> > + if (rtc_info_type == 0x01 || rtc_info_type == 0x02 ||
> > + rtc_info_type == 0x03) {
> > + data_buf[0] = 0x01;
> > + data_buf[1] = rtc_info_type;
> > + memcpy(&data_buf[2], &seconds, sizeof(u64));
>
> Use sizeof(seconds) instead?
>
ok, I will do that.

> > + } else {
> > + pr_err("%s: invalid rtc_info_type %d\n",
> > + mmc_hostname(host), rtc_info_type);
> > + kfree(data_buf);
> > + return -EINVAL;
> > + }
> > +
> > + mrq.cmd = &cmd;
> > + mrq.data = &data;
> > +
> > + cmd.opcode = MMC_SET_TIME;
> > + cmd.arg = 0;
> > + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> > +
> > + data.blksz = 512;
> > + data.blocks = 1;
> > + data.flags = MMC_DATA_WRITE;
> > + data.sg = &sg;
> > + data.sg_len = 1;
> > + sg_init_one(&sg, data_buf, 512);
> > +
> > + mmc_set_data_timeout(&data, card);
> > +
> > + mmc_wait_for_req(host, &mrq);
> > +
> > + if (cmd.error) {
> > + err = cmd.error;
> > + goto out;
> > + }
> > +
> > + if (data.error) {
> > + err = data.error;
> > + goto out;
> > + }
>
> Why not
>
> if (cmd.error) {
> err = cmd.error;
> } else if (data.error) {
> err = data.error;
> } else {
> err = 0;
> }
>
> > +out:
>
> And then drop out: and the assignment of err to 0 up above?
ok, I will do that.

>
> > + kfree(data_buf);
> > + return err;
> > +}
> > +EXPORT_SYMBOL_GPL(mmc_set_time);

\
 
 \ /
  Last update: 2021-12-07 06:28    [W:0.098 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site