lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema
Hi,

On 12/7/21 07:03, Jayesh Choudhary wrote:
>>> +  tdm-slots:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description: number of channels over one serializer
>>> +    maxItems: 1
>>
>> and it has to be between 2 and 32, ignored in DIT mode (384 slots)
>>
>
> Will add minimum and maximum. Should this be added as a conditional
> property when op-mode is 0 (I2S mode) and mark it as required?

That would make it much nicer, yes, thank you!

>>> +  port:
>>> +    description: connection for when McASP is used via graph card
>>> +    type: object
>>
>> I understand that it can be present under the mcasp node as it is part
>> of the graph card binding (or a card binding using graph).
>> I mean if a new card binding comes around then we need to document it
>> here as well?
>>
>
> Specific properties are not marked for the port. So it should not be an
> issue. Other alternative is to mark the additional properties as true
> but that is not preferred.

If the McASP is used with simple-sound-card (as it is the case most of
the time) then the port is not present under the node for this device as
the card is not using graph.
I consider the port (and the #sound-dai-cells if we are here) not part
of the McASP hardware description as they are part of the graph or
simple-card binding.

I'm fine if the port remains here

> Peter,
> Any other changes I should make?

Not much, this already looking good.
I would fix the dts files which generates warning/error with this yaml
as they are incorrect.

--
Péter

\
 
 \ /
  Last update: 2021-12-07 20:40    [W:0.055 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site