lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] hwmon: (pmbus) Add Delta AHE-50DC fan control module driver
On Tue, Dec 07, 2021 at 09:50:15AM PST, Guenter Roeck wrote:
>On Mon, Dec 06, 2021 at 11:15:20PM -0800, Zev Weiss wrote:
>> This device is an integrated module of the Delta AHE-50DC Open19 power
>> shelf. For lack of proper documentation, this driver has been developed
>> referencing an existing (GPL) driver that was included in a code release
>> from LinkedIn [1]. It provides four fan speeds, four temperatures, and
>> one voltage reading, as well as a handful of warning and fault
>> indicators.
>>
>> [1] https://github.com/linkedin/o19-bmc-firmware/blob/master/meta-openbmc/meta-linkedin/meta-deltapower/recipes-kernel/fancontrol-mod/files/fancontrol.c
>>
>
>Hmm, that reference isn't really accurate anymore. I think it would be
>better to just say that the device was found to be PMBus compliant.

Sure, will do.

>
>> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
>> ---
>> MAINTAINERS | 6 ++
>> drivers/hwmon/pmbus/Kconfig | 12 ++++
>> drivers/hwmon/pmbus/Makefile | 1 +
>> drivers/hwmon/pmbus/delta-ahe50dc-fan.c | 84 +++++++++++++++++++++++++
>> 4 files changed, 103 insertions(+)
>> create mode 100644 drivers/hwmon/pmbus/delta-ahe50dc-fan.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 0ac052200ecb..8bb7ba52d2f5 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -5425,6 +5425,12 @@ W: https://linuxtv.org
>> T: git git://linuxtv.org/media_tree.git
>> F: drivers/media/platform/sti/delta
>>
>> +DELTA AHE-50DC FAN CONTROL MODULE DRIVER
>> +M: Zev Weiss <zev@bewilderbeest.net>
>> +L: linux-hwmon@vger.kernel.org
>> +S: Maintained
>> +F: drivers/hwmon/pmbus/delta-ahe50dc-fan.c
>> +
>> DELTA DPS920AB PSU DRIVER
>> M: Robert Marko <robert.marko@sartura.hr>
>> L: linux-hwmon@vger.kernel.org
>> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
>> index ffb609cee3a4..937e1c2c11e7 100644
>> --- a/drivers/hwmon/pmbus/Kconfig
>> +++ b/drivers/hwmon/pmbus/Kconfig
>> @@ -66,6 +66,18 @@ config SENSORS_BPA_RS600
>> This driver can also be built as a module. If so, the module will
>> be called bpa-rs600.
>>
>> +config SENSORS_DELTA_AHE50DC_FAN
>> + tristate "Delta AHE-50DC fan control module"
>> + depends on I2C
>> + select REGMAP_I2C

And I realize I neglected to drop the depends & select lines here when
moving this bit into the pmbus directory...

>> + help
>> + If you say yes here you get hardware monitoring support for
>> + the integrated fan control module of the Delta AHE-50DC
>> + Open19 power shelf.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called delta-ahe50dc-fan.
>> +
>> config SENSORS_FSP_3Y
>> tristate "FSP/3Y-Power power supplies"
>> help
>> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
>> index 0ed4d596a948..a56b2897288d 100644
>> --- a/drivers/hwmon/pmbus/Makefile
>> +++ b/drivers/hwmon/pmbus/Makefile
>> @@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
>> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
>> obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
>> obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
>> +obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
>> obj-$(CONFIG_SENSORS_FSP_3Y) += fsp-3y.o
>> obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
>> obj-$(CONFIG_SENSORS_DPS920AB) += dps920ab.o
>> diff --git a/drivers/hwmon/pmbus/delta-ahe50dc-fan.c b/drivers/hwmon/pmbus/delta-ahe50dc-fan.c
>> new file mode 100644
>> index 000000000000..07b1e7c5f5f5
>> --- /dev/null
>> +++ b/drivers/hwmon/pmbus/delta-ahe50dc-fan.c
>> @@ -0,0 +1,84 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Delta AHE-50DC power shelf fan control module driver
>> + *
>> + * Copyright 2021 Zev Weiss <zev@bewilderbeest.net>
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/i2c.h>
>> +#include <linux/pmbus.h>
>
>Alphabetic include file order please.

Ack, will fix.

>
>> +
>> +#include "pmbus.h"
>> +
>> +#define AHE50DC_PMBUS_READ_TEMP4 0xd0
>> +
>> +static int ahe50dc_fan_read_word_data(struct i2c_client *client, int page, int phase, int reg)
>> +{
>> + /* temp1 in (virtual) page 1 is remapped to mfr-specific temp4 */
>> + if (page == 1) {
>> + if (reg == PMBUS_READ_TEMPERATURE_1)
>> + return i2c_smbus_read_word_data(client, AHE50DC_PMBUS_READ_TEMP4);
>> + return -EOPNOTSUPP;
>> + }
>> + return -ENODATA;
>> +}
>> +
>> +static struct pmbus_driver_info ahe50dc_fan_info = {
>> + .pages = 2,
>> + .format[PSC_FAN] = direct,
>> + .format[PSC_TEMPERATURE] = direct,
>> + .format[PSC_VOLTAGE_IN] = direct,
>> + .m[PSC_FAN] = 1,
>> + .b[PSC_FAN] = 0,
>> + .R[PSC_FAN] = 0,
>> + .m[PSC_TEMPERATURE] = 1,
>> + .b[PSC_TEMPERATURE] = 0,
>> + .R[PSC_TEMPERATURE] = 1,
>> + .m[PSC_VOLTAGE_IN] = 1,
>> + .b[PSC_VOLTAGE_IN] = 0,
>> + .R[PSC_VOLTAGE_IN] = 3,
>
>How did you determine the exponents ? The referenced driver
>doesn't seem to make a difference between voltage and temperature
>exponents (nor fan speed, which is a bit odd).

Lacking documentation, the honest answer here is that I just sort of
eyeballed it. However, after doing so, I dug through the code dump a
bit more and found some userspace unit-conversion bits that appear to
confirm what I arrived at:

https://github.com/linkedin/o19-bmc-firmware/blob/master/meta-openbmc/meta-linkedin/meta-deltapower/recipes-deltapower/platform-lib/files/powershelf/powershelf_fan.c

(Lines 107, and 153/161/169/177.)

>
>> + .func[0] = PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
>> + PMBUS_HAVE_VIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_FAN34 |
>> + PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_STATUS_FAN34 | PMBUS_PAGE_VIRTUAL,
>> + .func[1] = PMBUS_HAVE_TEMP | PMBUS_PAGE_VIRTUAL,
>> + .read_word_data = ahe50dc_fan_read_word_data,
>> +};
>> +
>> +static struct pmbus_platform_data ahe50dc_fan_data = {
>> + .flags = PMBUS_NO_CAPABILITY,
>> +};
>
>Is that necessary ? It should only be used if trying to read CAPABILITY
>reports bad data.

Unfortunately it does seem to be needed -- CAPABILITY returns 0xff, but
despite having bit 7 set the device mangles all subsequent transactions
by returning bad PEC bytes if we enable I2C_CLIENT_PEC. Actually, none
of the fields in that CAPABILITY value seem to accurately reflect the
device's observed behavior; I'm pretty sure 0xff is just what it returns
when it doesn't support something (I think the bad PECs it sends are all
0xff too).

I'll add an explanatory comment in v4.


Thanks for the review!


Zev

\
 
 \ /
  Last update: 2021-12-07 20:23    [W:1.600 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site