lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 08/11] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
Date
Add a note about struct dw_scl_sda_cfg usage to discourage people
of using this structure on new platforms. Instead they should try
hard to put the needed information into firmware descriptions.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 87bdf7acb612..c1b57895e8ab 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -39,6 +39,13 @@ enum dw_pci_ctl_id_t {
navi_amd,
};

+/*
+ * This is a legacy structure to describe the hardware counters
+ * to configure signal timings on the bus. For Device Tree platforms
+ * one should use the respective properties and for ACPI there is
+ * a set of ACPI methods that provide these counters. No new
+ * platform should use this structure.
+ */
struct dw_scl_sda_cfg {
u16 ss_hcnt;
u16 fs_hcnt;
--
2.33.0
\
 
 \ /
  Last update: 2021-12-07 20:23    [W:0.186 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site