lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
From
Date
On 12/7/21 6:58 AM, Rob Herring wrote:
> On Mon, 06 Dec 2021 10:26:11 -0800, Florian Fainelli wrote:
>> Convert the Broadcom STB L2 generic Level 2 interrupt controller Device
>> Tree binding to YAML to help with validation.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>> .../interrupt-controller/brcm,l2-intc.txt | 31 ---------
>> .../interrupt-controller/brcm,l2-intc.yaml | 64 +++++++++++++++++++
>> 2 files changed, 64 insertions(+), 31 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/patch/1564135
>
>
> interrupt-controller@3e1000: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/bcm7445-bcm97445svmb.dt.yaml
>
> interrupt-controller@7ef00100: compatible: 'oneOf' conditional failed, one must be fixed:
> arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dt.yaml
> arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dt.yaml
> arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dt.yaml
> arch/arm/boot/dts/bcm2711-rpi-400.dt.yaml
> arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml
> arch/arm/boot/dts/bcm2711-rpi-cm4-io.dt.yaml

Both fixed in v3.
--
Florian

\
 
 \ /
  Last update: 2021-12-07 19:28    [W:0.043 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site