lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/stm: remove conflicting framebuffers
From
Date
Hi Thomas,


On 12/3/21 10:35 AM, Thomas Zimmermann wrote:
> Hi
>
> Am 03.12.21 um 09:55 schrieb Yannick Fertre:
>> In case of using simplefb or another conflicting framebuffer,
>> call drm_aperture_remove_framebuffers() to remove memory allocated.
>>
>> Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
>> ---
>>   drivers/gpu/drm/stm/drv.c | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
>> index 222869b232ae..5ba46f70f081 100644
>> --- a/drivers/gpu/drm/stm/drv.c
>> +++ b/drivers/gpu/drm/stm/drv.c
>> @@ -14,6 +14,7 @@
>>   #include <linux/of_platform.h>
>>   #include <linux/pm_runtime.h>
>> +#include <drm/drm_aperture.h>
>>   #include <drm/drm_atomic.h>
>>   #include <drm/drm_atomic_helper.h>
>>   #include <drm/drm_drv.h>
>> @@ -193,6 +194,10 @@ static int stm_drm_platform_probe(struct
>> platform_device *pdev)
>>       if (ret)
>>           goto err_put;
>> +    ret = drm_aperture_remove_framebuffers(false, &drv_driver);
>> +    if (ret)
>> +        goto err_put;
>> +
>
> This has to be done at the very top of the probe function, before
> anything that touches the device. Otherwise both drivers interfere with
> each other while probing and setup's going on.
>
> Best regards
> Thomas
>
>>       ret = drm_dev_register(ddev, 0);
>>       if (ret)
>>           goto err_put;
>>
>
Thanks for reviewing the patch.
I will follow your advice and push a new patch.

Yannick

\
 
 \ /
  Last update: 2021-12-06 14:43    [W:0.046 / U:1.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site