lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 03/25] media: atmel: introduce microchip csi2dc driver
Hi Eugen

On Mon, Dec 06, 2021 at 11:42:25AM +0000, Eugen.Hristev@microchip.com wrote:
> On 12/6/21 12:51 PM, Jacopo Mondi wrote:
> > Hello Eugen
> >
> > thanks for addressing all my previous comments, just a few more
> > things and the driver looks good to me
>
> Thanks for reviewing. I tried my best to accomodate your suggestions.
> >
> > On Fri, Nov 12, 2021 at 04:24:47PM +0200, Eugen Hristev wrote:
> >> Microchip CSI2DC (CSI2 Demultiplexer Controller) is a misc bridge device
> >> that converts a byte stream in IDI Synopsys format (coming from a CSI2HOST)
> >> to a pixel stream that can be captured by a sensor controller.
> >>
> >> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> >> ---
> >> Changes in v2:
> >> - implement try formats
> >> - added parallel mode
> >> - moved to fwlink endpoints
> >> - many other minor corrections from Jacopo's review
> >>
> >> Changes in this revision:
> >> - addressed comments by Jacopo and Laurent as in this thread:
> >> https://www.spinics.net/lists/linux-media/msg181044.html
> >>
> >> Previous change log :
> >> Changes in v5:
> >> - only in bindings
> >>
> >> Changes in v4:
> >> - now using get_mbus_config ops to get data from the subdevice, like the
> >> virtual channel id, and the clock type.
> >> - now having possibility to select any of the RAW10 data modes
> >> - at completion time, select which formats are also available in the subdevice,
> >> and move to the dynamic list accordingly
> >> - changed the pipeline integration, do not advertise subdev ready at probe time.
> >> wait until completion is done, and then start a workqueue that will register
> >> this device as a subdevice for the next element in pipeline.
> >> - moved the s_power code into a different function called now csi2dc_power
> >> that is called with CONFIG_PM functions. This is also called at completion,
> >> to have the device ready in case CONFIG_PM is not selected on the platform.
> >> - merged try_fmt into set_fmt
> >> - driver cleanup, wrapped lines over 80 characters
> >>
> >> Changes in v2:
> >> - moved driver to platform/atmel
> >> - fixed minor things as per Sakari's review
> >> - still some things from v2 review are not yet addressed, to be followed up
> >>
> >>
> >> drivers/media/platform/Makefile | 1 +
> >> drivers/media/platform/atmel/Kconfig | 15 +
> >> drivers/media/platform/atmel/Makefile | 1 +
> >> .../media/platform/atmel/microchip-csi2dc.c | 797 ++++++++++++++++++
> >> 4 files changed, 814 insertions(+)
> >> create mode 100644 drivers/media/platform/atmel/microchip-csi2dc.c
> >>
> >> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> >> index 832357240e89..b18e5f704145 100644
> >> --- a/drivers/media/platform/Makefile
> >> +++ b/drivers/media/platform/Makefile
> >> @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
> >> obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
> >> obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
> >> obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
> >> +obj-$(CONFIG_VIDEO_MICROCHIP_CSI2DC) += atmel/
> >>
> >> obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/
> >>
> >> diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig
> >> index dda2f27da317..f83bee373d82 100644
> >> --- a/drivers/media/platform/atmel/Kconfig
> >> +++ b/drivers/media/platform/atmel/Kconfig
> >> @@ -40,3 +40,18 @@ config VIDEO_ATMEL_ISI
> >> help
> >> This module makes the ATMEL Image Sensor Interface available
> >> as a v4l2 device.
> >> +
> >> +config VIDEO_MICROCHIP_CSI2DC
> >> + tristate "Microchip CSI2 Demux Controller"
> >> + depends on VIDEO_V4L2 && COMMON_CLK && OF
> >> + depends on ARCH_AT91 || COMPILE_TEST
> >> + select MEDIA_CONTROLLER
> >> + select VIDEO_V4L2_SUBDEV_API
> >> + select V4L2_FWNODE
> >> + help
> >> + CSI2 Demux Controller driver. CSI2DC is a helper chip
> >> + that converts IDI interface byte stream to a parallel pixel stream.
> >> + It supports various RAW formats as input.
> >> +
> >> + To compile this driver as a module, choose M here: the
> >> + module will be called microchip-csi2dc.
> >> diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
> >> index 46d264ab7948..39f0a7eba702 100644
> >> --- a/drivers/media/platform/atmel/Makefile
> >> +++ b/drivers/media/platform/atmel/Makefile
> >> @@ -6,3 +6,4 @@ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
> >> obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-base.o
> >> obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
> >> obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
> >> +obj-$(CONFIG_VIDEO_MICROCHIP_CSI2DC) += microchip-csi2dc.o
> >> diff --git a/drivers/media/platform/atmel/microchip-csi2dc.c b/drivers/media/platform/atmel/microchip-csi2dc.c
> >> new file mode 100644
> >> index 000000000000..2b106f6fd5d0
> >> --- /dev/null
> >> +++ b/drivers/media/platform/atmel/microchip-csi2dc.c
> >> @@ -0,0 +1,797 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +/*
> >> + * Microchip CSI2 Demux Controller (CSI2DC) driver
> >> + *
> >> + * Copyright (C) 2018 Microchip Technology, Inc.
> >> + *
> >> + * Author: Eugen Hristev <eugen.hristev@microchip.com>
> >> + *
> >> + */
> >> +
> >> +#include <linux/clk.h>
> >> +#include <linux/mod_devicetable.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of_graph.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/pm_runtime.h>
> >> +#include <linux/videodev2.h>
> >> +
> >> +#include <media/v4l2-fwnode.h>
> >> +#include <media/v4l2-subdev.h>
> >> +
> >> +/* Global configuration register */
> >> +#define CSI2DC_GCFG 0x0
> >> +
> >> +/* MIPI sensor pixel clock is free running */
> >> +#define CSI2DC_GCFG_MIPIFRN BIT(0)
> >> +/* GPIO parallel interface selection */
> >> +#define CSI2DC_GCFG_GPIOSEL BIT(1)
> >> +/* Output waveform inter-line minimum delay */
> >> +#define CSI2DC_GCFG_HLC(v) ((v) << 4)
> >> +#define CSI2DC_GCFG_HLC_MASK GENMASK(7, 4)
> >> +/* SAMA7G5 requires a HLC delay of 15 */
> >> +#define SAMA7G5_HLC (15)
> >> +
> >> +/* Global control register */
> >> +#define CSI2DC_GCTLR 0x04
> >> +#define CSI2DC_GCTLR_SWRST BIT(0)
> >> +
> >> +/* Global status register */
> >> +#define CSI2DC_GS 0x08
> >> +
> >> +/* SSP interrupt status register */
> >> +#define CSI2DC_SSPIS 0x28
> >> +/* Pipe update register */
> >> +#define CSI2DC_PU 0xc0
> >> +/* Video pipe attributes update */
> >> +#define CSI2DC_PU_VP BIT(0)
> >> +
> >> +/* Pipe update status register */
> >> +#define CSI2DC_PUS 0xc4
> >> +
> >> +/* Video pipeline enable register */
> >> +#define CSI2DC_VPE 0xf8
> >> +#define CSI2DC_VPE_ENABLE BIT(0)
> >> +
> >> +/* Video pipeline configuration register */
> >> +#define CSI2DC_VPCFG 0xfc
> >> +/* Data type */
> >> +#define CSI2DC_VPCFG_DT(v) ((v) << 0)
> >> +#define CSI2DC_VPCFG_DT_MASK GENMASK(5, 0)
> >> +/* Virtual channel identifier */
> >> +#define CSI2DC_VPCFG_VC(v) ((v) << 6)
> >> +#define CSI2DC_VPCFG_VC_MASK GENMASK(7, 6)
> >> +/* Decompression enable */
> >> +#define CSI2DC_VPCFG_DE BIT(8)
> >> +/* Decoder mode */
> >> +#define CSI2DC_VPCFG_DM(v) ((v) << 9)
> >> +#define CSI2DC_VPCFG_DM_DECODER8TO12 0
> >> +/* Decoder predictor 2 selection */
> >> +#define CSI2DC_VPCFG_DP2 BIT(12)
> >> +/* Recommended memory storage */
> >> +#define CSI2DC_VPCFG_RMS BIT(13)
> >> +/* Post adjustment */
> >> +#define CSI2DC_VPCFG_PA BIT(14)
> >> +
> >> +/* Video pipeline column register */
> >> +#define CSI2DC_VPCOL 0x100
> >> +/* Column number */
> >> +#define CSI2DC_VPCOL_COL(v) ((v) << 0)
> >> +#define CSI2DC_VPCOL_COL_MASK GENMASK(15, 0)
> >> +
> >> +/* Video pipeline row register */
> >> +#define CSI2DC_VPROW 0x104
> >> +/* Row number */
> >> +#define CSI2DC_VPROW_ROW(v) ((v) << 0)
> >> +#define CSI2DC_VPROW_ROW_MASK GENMASK(15, 0)
> >> +
> >> +/* Version register */
> >> +#define CSI2DC_VERSION 0x1fc
> >> +
> >> +/* register read/write helpers */
> >> +#define csi2dc_readl(st, reg) readl_relaxed((st)->base + (reg))
> >> +#define csi2dc_writel(st, reg, val) writel_relaxed((val), \
> >> + (st)->base + (reg))
> >> +
> >> +/* supported RAW data types */
> >> +#define CSI2DC_DT_RAW6 0x28
> >> +#define CSI2DC_DT_RAW7 0x29
> >> +#define CSI2DC_DT_RAW8 0x2a
> >> +#define CSI2DC_DT_RAW10 0x2b
> >> +#define CSI2DC_DT_RAW12 0x2c
> >> +#define CSI2DC_DT_RAW14 0x2d
> >> +
> >> +/*
> >> + * struct csi2dc_format - CSI2DC format type struct
> >> + * @mbus_code: Media bus code for the format
> >> + * @dt: Data type constant for this format
> >> + */
> >> +struct csi2dc_format {
> >> + u32 mbus_code;
> >> + u32 dt;
> >> +};
> >> +
> >> +static const struct csi2dc_format csi2dc_formats[] = {
> >> + {
> >> + .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8,
> >> + .dt = CSI2DC_DT_RAW8,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
> >> + .dt = CSI2DC_DT_RAW8,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8,
> >> + .dt = CSI2DC_DT_RAW8,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8,
> >> + .dt = CSI2DC_DT_RAW8,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
> >> + .dt = CSI2DC_DT_RAW10,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
> >> + .dt = CSI2DC_DT_RAW10,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
> >> + .dt = CSI2DC_DT_RAW10,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
> >> + .dt = CSI2DC_DT_RAW10,
> >> + }, {
> >> + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
> > Is this intentionally not associated with a CSI-2 DT code ?
>
> Yes. It is not a raw format.
> I do not have a sensor that could stream YUYV8_2X8 with CSI-2 .
> I tested this mode with parallel sensor, and in this case, CSI-2 DT
> value does not make sense and it's not used.
> The idea would be that when and if I get my hands on a sensor that could
> actually do this with CSI2, I would update the driver here (if it works.
> I am not sure it actually does ...)

I understand, but the first user of your driver that connects a
YUV-capable sensor will be very disappointed, as debugging the fact
that the DT identifier is silently set to 0 will be quite painful (as
if I'm not mistaken fields not initialized in a designated initializer
list are set to 0).

As the DT identifiers are defined by the CSI-2 specification and will
not change, I think you can safely add it here.

Thanks
j

> >
> >> + },
> >> +};
> >> +
> >> +enum mipi_csi_pads {
> >> + CSI2DC_PAD_SINK = 0,
> >> + CSI2DC_PAD_SOURCE = 1,
> >> + CSI2DC_PADS_NUM = 2,
> >> +};
> >> +
> >> +/*
> >> + * struct csi2dc_device - CSI2DC device driver data/config struct
> >> + * @base: Register map base address
> >> + * @csi2dc_sd: v4l2 subdevice for the csi2dc device
> >> + * This is the subdevice that the csi2dc device itself
> >> + * registers in v4l2 subsystem
> >> + * @dev: struct device for this csi2dc device
> >> + * @pclk: Peripheral clock reference
> >> + * Input clock that clocks the hardware block internal
> >> + * logic
> >> + * @scck: Sensor Controller clock reference
> >> + * Input clock that is used to generate the pixel clock
> >> + * @format: Current saved format used in g/s fmt
> >> + * @cur_fmt: Current state format
> >> + * @try_fmt: Try format that is being tried
> >> + * @pads: Media entity pads for the csi2dc subdevice
> >> + * @clk_gated: Whether the clock is gated or free running
> >> + * @video_pipe: Whether video pipeline is configured
> >> + * @parallel_mode: The underlying subdevice is connected on a parallel bus
> >> + * @vc: Current set virtual channel
> >> + * @notifier: Async notifier that is used to bound the underlying
> >> + * subdevice to the csi2dc subdevice
> >> + * @input_sd: Reference to the underlying subdevice bound to the
> >> + * csi2dc subdevice
> >> + * @remote_pad: Pad number of the underlying subdevice that is linked
> >> + * to the csi2dc subdevice sink pad.
> >> + */
> >> +struct csi2dc_device {
> >> + void __iomem *base;
> >> + struct v4l2_subdev csi2dc_sd;
> >> + struct device *dev;
> >> + struct clk *pclk;
> >> + struct clk *scck;
> >> +
> >> + struct v4l2_mbus_framefmt format;
> >> +
> >> + const struct csi2dc_format *cur_fmt;
> >> + const struct csi2dc_format *try_fmt;
> >> +
> >> + struct media_pad pads[CSI2DC_PADS_NUM];
> >> +
> >> + bool clk_gated;
> >> + bool video_pipe;
> >> + bool parallel_mode;
> >> + u32 vc;
> >> +
> >> + struct v4l2_async_notifier notifier;
> >> +
> >> + struct v4l2_subdev *input_sd;
> >> +
> >> + u32 remote_pad;
> >> +};
> >> +
> >> +static inline struct csi2dc_device *
> >> +csi2dc_sd_to_csi2dc_device(struct v4l2_subdev *csi2dc_sd)
> >> +{
> >> + return container_of(csi2dc_sd, struct csi2dc_device, csi2dc_sd);
> >> +}
> >> +
> >> +static int csi2dc_enum_mbus_code(struct v4l2_subdev *csi2dc_sd,
> >> + struct v4l2_subdev_state *sd_state,
> >> + struct v4l2_subdev_mbus_code_enum *code)
> >> +{
> >> + if (code->index >= ARRAY_SIZE(csi2dc_formats))
> >> + return -EINVAL;
> >> +
> >> + code->code = csi2dc_formats[code->index].mbus_code;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int csi2dc_get_fmt(struct v4l2_subdev *csi2dc_sd,
> >> + struct v4l2_subdev_state *sd_state,
> >> + struct v4l2_subdev_format *format)
> >> +{
> >> + struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
> >> + struct v4l2_mbus_framefmt *v4l2_try_fmt;
> >> +
> >> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> >> + v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
> >> + format->pad);
> >> + format->format = *v4l2_try_fmt;
> >> +
> >> + return 0;
> >> + }
> >> +
> >> + format->format = csi2dc->format;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int csi2dc_set_fmt(struct v4l2_subdev *csi2dc_sd,
> >> + struct v4l2_subdev_state *sd_state,
> >> + struct v4l2_subdev_format *req_fmt)
> >> +{
> >> + struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
> >> + const struct csi2dc_format *fmt, *try_fmt = NULL;
> >> + struct v4l2_mbus_framefmt *v4l2_try_fmt;
> >> + unsigned int i;
> >> +
> >> + for (i = 0; i < ARRAY_SIZE(csi2dc_formats); i++) {
> >> + fmt = &csi2dc_formats[i];
> >> + if (req_fmt->format.code == fmt->mbus_code)
> >> + try_fmt = fmt;
> >> + fmt++;
> >> + }
> >> +
> >> + /* in case we could not find the desired format, default to something */
> >> + if (!try_fmt) {
> >> + try_fmt = &csi2dc_formats[0];
> >> +
> >> + dev_dbg(csi2dc->dev,
> >> + "CSI2DC unsupported format 0x%x, defaulting to 0x%x\n",
> >> + req_fmt->format.code, csi2dc_formats[0].mbus_code);
> >> + }
> >> +
> >> + req_fmt->format.code = try_fmt->mbus_code;
> >> + req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB;
> >> + req_fmt->format.field = V4L2_FIELD_NONE;
> >> +
> >> + if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> >> + v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
> >> + req_fmt->pad);
> >> + *v4l2_try_fmt = req_fmt->format;
> >> + /* Trying on the pad sink makes the source sink change too */
> >> + if (req_fmt->pad == CSI2DC_PAD_SINK) {
> >
> > s/source sink/source pad/
> >
> >> + v4l2_try_fmt =
> >> + v4l2_subdev_get_try_format(csi2dc_sd,
> >> + sd_state,
> >> + CSI2DC_PAD_SOURCE);
> >> + *v4l2_try_fmt = req_fmt->format;
> >
> > Shouldn't this be the same for the active format then ? If this device
> > operates by transporting the same exact format from the sink to the
> > source, shouldn't you disable setting a format on the source, and
> > always propagate to the sink ? I would have done so, but maybe
> > Sakari/Laurent could tell you if that's fine.
>
> Hm. I will try. To see if it works and v4l2-compliance is happy. ( I did
> this propagation for try format because it wasn't )
>
> >
> >> + }
> >> + /* if we are just trying, we are done */
> >> + return 0;
> >> + }
> >> +
> >> + /* save the format for later requests */
> >> + csi2dc->format = req_fmt->format;
> >> +
> >> + /* update config */
> >> + csi2dc->cur_fmt = try_fmt;
> >> +
> >> + dev_dbg(csi2dc->dev, "new format set: 0x%x @%dx%d\n",
> >> + csi2dc->format.code, csi2dc->format.width,
> >> + csi2dc->format.height);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int csi2dc_power(struct csi2dc_device *csi2dc, int on)
> >> +{
> >> + int ret = 0;
> >> +
> >> + if (on) {
> >> + ret = clk_prepare_enable(csi2dc->pclk);
> >> + if (ret) {
> >> + dev_err(csi2dc->dev, "failed to enable pclk:%d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + ret = clk_prepare_enable(csi2dc->scck);
> >> + if (ret) {
> >> + dev_err(csi2dc->dev, "failed to enable scck:%d\n", ret);
> >> + clk_disable_unprepare(csi2dc->pclk);
> >> + return ret;
> >> + }
> >> +
> >> + /* if powering up, deassert reset line */
> >> + csi2dc_writel(csi2dc, CSI2DC_GCTLR, CSI2DC_GCTLR_SWRST);
> >> + } else {
> >> + /* if powering down, assert reset line */
> >> + csi2dc_writel(csi2dc, CSI2DC_GCTLR, 0);
> >> +
> >> + clk_disable_unprepare(csi2dc->scck);
> >> + clk_disable_unprepare(csi2dc->pclk);
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int csi2dc_get_mbus_config(struct csi2dc_device *csi2dc)
> >> +{
> >> + struct v4l2_mbus_config mbus_config = { 0 };
> >> + int ret;
> >> +
> >> + ret = v4l2_subdev_call(csi2dc->input_sd, pad, get_mbus_config,
> >> + csi2dc->remote_pad, &mbus_config);
> >> + if (ret == -ENOIOCTLCMD) {
> >> + dev_dbg(csi2dc->dev,
> >> + "no remote mbus configuration available\n");
> >> + goto csi2dc_get_mbus_config_defaults;
> >> + }
> >> +
> >> + if (ret) {
> >> + dev_err(csi2dc->dev,
> >> + "failed to get remote mbus configuration\n");
> >> + goto csi2dc_get_mbus_config_defaults;
> >> + }
> >> +
> >> + if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_0)
> >> + csi2dc->vc = 0;
> >> + else if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_1)
> >> + csi2dc->vc = 1;
> >> + else if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_2)
> >> + csi2dc->vc = 2;
> >> + else if (mbus_config.flags & V4L2_MBUS_CSI2_CHANNEL_3)
> >> + csi2dc->vc = 3;
> >> +
> >> + dev_dbg(csi2dc->dev, "subdev sending on channel %d\n", csi2dc->vc);
> >> +
> >> + csi2dc->clk_gated = mbus_config.flags &
> >> + V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
> >> +
> >> + dev_dbg(csi2dc->dev, "mbus_config: %s clock\n",
> >> + csi2dc->clk_gated ? "gated" : "free running");
> >> +
> >> + return 0;
> >> +
> >> +csi2dc_get_mbus_config_defaults:
> >> + csi2dc->vc = 0; /* Virtual ID 0 by default */
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void csi2dc_vp_update(struct csi2dc_device *csi2dc)
> >> +{
> >> + u32 vp, gcfg;
> >> +
> >> + if (!csi2dc->video_pipe) {
> >> + dev_err(csi2dc->dev, "video pipeline unavailable\n");
> >> + return;
> >> + }
> >> +
> >> + if (csi2dc->parallel_mode) {
> >> + /* In parallel mode, GPIO parallel interface must be selected */
> >> + gcfg = csi2dc_readl(csi2dc, CSI2DC_GCFG);
> >> + gcfg |= CSI2DC_GCFG_GPIOSEL;
> >> + csi2dc_writel(csi2dc, CSI2DC_GCFG, gcfg);
> >> + return;
> >> + }
> >> +
> >> + /* serial video pipeline */
> >> +
> >> + csi2dc_writel(csi2dc, CSI2DC_GCFG,
> >> + (SAMA7G5_HLC & CSI2DC_GCFG_HLC_MASK) |
> >> + (csi2dc->clk_gated ? 0 : CSI2DC_GCFG_MIPIFRN));
> >> +
> >> + csi2dc_writel(csi2dc, CSI2DC_VPCOL,
> >> + CSI2DC_VPCOL_COL(0xfff) & CSI2DC_VPCOL_COL_MASK);
> >> + csi2dc_writel(csi2dc, CSI2DC_VPROW,
> >> + CSI2DC_VPROW_ROW(0xfff) & CSI2DC_VPROW_ROW_MASK);
> >> +
> >> + vp = CSI2DC_VPCFG_DT(csi2dc->cur_fmt->dt) & CSI2DC_VPCFG_DT_MASK;
> >> + vp |= CSI2DC_VPCFG_VC(csi2dc->vc) & CSI2DC_VPCFG_VC_MASK;
> >> + vp &= ~CSI2DC_VPCFG_DE;
> >> + vp |= CSI2DC_VPCFG_DM(CSI2DC_VPCFG_DM_DECODER8TO12);
> >> + vp &= ~CSI2DC_VPCFG_DP2;
> >> + vp &= ~CSI2DC_VPCFG_RMS;
> >> + vp |= CSI2DC_VPCFG_PA;
> >> +
> >> + csi2dc_writel(csi2dc, CSI2DC_VPCFG, vp);
> >> + csi2dc_writel(csi2dc, CSI2DC_VPE, CSI2DC_VPE_ENABLE);
> >> + csi2dc_writel(csi2dc, CSI2DC_PU, CSI2DC_PU_VP);
> >> +}
> >> +
> >> +static int csi2dc_s_stream(struct v4l2_subdev *csi2dc_sd, int enable)
> >> +{
> >> + struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
> >> + int ret;
> >> +
> >> + if (enable) {
> >> + ret = pm_runtime_resume_and_get(csi2dc->dev);
> >> + if (ret < 0)
> >> + return ret;
> >> +
> >> + csi2dc_get_mbus_config(csi2dc);
> >> +
> >> + csi2dc_vp_update(csi2dc);
> >> +
> >> + return v4l2_subdev_call(csi2dc->input_sd, video, s_stream,
> >> + true);
> >> + }
> >> + /* stop streaming scenario */
> >> + ret = v4l2_subdev_call(csi2dc->input_sd, video, s_stream, false);
> >> +
> >> + pm_runtime_put_sync(csi2dc->dev);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int csi2dc_init_cfg(struct v4l2_subdev *csi2dc_sd,
> >> + struct v4l2_subdev_state *sd_state)
> >> +{
> >> + struct v4l2_mbus_framefmt *v4l2_try_fmt =
> >> + v4l2_subdev_get_try_format(csi2dc_sd, sd_state, 0);
> >> +
> >> + v4l2_try_fmt->height = 480;
> >> + v4l2_try_fmt->width = 640;
> >> + v4l2_try_fmt->code = csi2dc_formats[0].mbus_code;
> >> + v4l2_try_fmt->colorspace = V4L2_COLORSPACE_SRGB;
> >> + v4l2_try_fmt->field = V4L2_FIELD_NONE;
> >> + v4l2_try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> >> + v4l2_try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
> >> + v4l2_try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static const struct v4l2_subdev_pad_ops csi2dc_pad_ops = {
> >> + .enum_mbus_code = csi2dc_enum_mbus_code,
> >> + .set_fmt = csi2dc_set_fmt,
> >> + .get_fmt = csi2dc_get_fmt,
> >> + .init_cfg = csi2dc_init_cfg,
> >> +};
> >> +
> >> +static const struct v4l2_subdev_video_ops csi2dc_video_ops = {
> >> + .s_stream = csi2dc_s_stream,
> >> +};
> >> +
> >> +static const struct v4l2_subdev_ops csi2dc_subdev_ops = {
> >> + .pad = &csi2dc_pad_ops,
> >> + .video = &csi2dc_video_ops,
> >> +};
> >> +
> >> +static int csi2dc_async_bound(struct v4l2_async_notifier *notifier,
> >> + struct v4l2_subdev *subdev,
> >> + struct v4l2_async_subdev *asd)
> >> +{
> >> + struct csi2dc_device *csi2dc = container_of(notifier,
> >> + struct csi2dc_device, notifier);
> >> + int pad;
> >> + int ret;
> >> +
> >> + csi2dc->input_sd = subdev;
> >> +
> >> + pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> >> + MEDIA_PAD_FL_SOURCE);
> >> + if (pad < 0) {
> >> + dev_err(csi2dc->dev, "Failed to find pad for %s\n",
> >> + subdev->name);
> >> + return pad;
> >> + }
> >> +
> >> + csi2dc->remote_pad = pad;
> >> +
> >> + ret = media_create_pad_link(&csi2dc->input_sd->entity,
> >> + csi2dc->remote_pad,
> >> + &csi2dc->csi2dc_sd.entity, 0,
> >> + MEDIA_LNK_FL_ENABLED);
> >> + if (ret) {
> >> + dev_err(csi2dc->dev,
> >> + "Failed to create pad link: %s to %s\n",
> >> + csi2dc->input_sd->entity.name,
> >> + csi2dc->csi2dc_sd.entity.name);
> >> + return ret;
> >> + }
> >> +
> >> + dev_dbg(csi2dc->dev, "link with %s pad: %d\n",
> >> + csi2dc->input_sd->name, csi2dc->remote_pad);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static const struct v4l2_async_notifier_operations csi2dc_async_ops = {
> >> + .bound = csi2dc_async_bound,
> >> +};
> >> +
> >> +static int csi2dc_prepare_notifier(struct csi2dc_device *csi2dc,
> >> + struct fwnode_handle *input_fwnode)
> >> +{
> >> + struct v4l2_async_subdev *asd;
> >> + int ret = 0;
> >> +
> >> + v4l2_async_nf_init(&csi2dc->notifier);
> >> +
> >> + asd = v4l2_async_nf_add_fwnode_remote(&csi2dc->notifier,
> >> + input_fwnode,
> >> + struct v4l2_async_subdev);
> >> +
> >> + fwnode_handle_put(input_fwnode);
> >> +
> >> + if (IS_ERR(asd)) {
> >> + ret = PTR_ERR(asd);
> >> + dev_err(csi2dc->dev,
> >> + "failed to add async notifier for node %pOF: %d\n",
> >> + to_of_node(input_fwnode), ret);
> >> + v4l2_async_nf_cleanup(&csi2dc->notifier);
> >> + return ret;
> >> + }
> >> +
> >> + csi2dc->notifier.ops = &csi2dc_async_ops;
> >> +
> >> + ret = v4l2_async_subdev_nf_register(&csi2dc->csi2dc_sd,
> >> + &csi2dc->notifier);
> >
> > Drop this blank line
> >
> >> +
> >> + if (ret) {
> >> + dev_err(csi2dc->dev, "fail to register async notifier: %d\n",
> >> + ret);
> >> + v4l2_async_nf_cleanup(&csi2dc->notifier);
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int csi2dc_of_parse(struct csi2dc_device *csi2dc,
> >> + struct device_node *of_node)
> >> +{
> >> + struct fwnode_handle *input_fwnode, *output_fwnode;
> >> + struct v4l2_fwnode_endpoint input_endpoint = { 0 },
> >> + output_endpoint = { 0 };
> >> + int ret;
> >> +
> >> + input_fwnode = fwnode_graph_get_next_endpoint(of_fwnode_handle(of_node),
> >> + NULL);
> >> +
> >> + if (!input_fwnode) {
> >> + dev_err(csi2dc->dev,
> >> + "missing port node at %pOF, input node is mandatory.\n",
> >> + of_node);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + ret = v4l2_fwnode_endpoint_parse(input_fwnode, &input_endpoint);
> >> +
> >
> > Drop this blank line
> >
> >> + if (ret) {
> >> + dev_err(csi2dc->dev, "endpoint not defined at %pOF\n", of_node);
> >> + goto csi2dc_of_parse_err;
> >> + }
> >> +
> >> + if (input_endpoint.bus_type == V4L2_MBUS_PARALLEL ||
> >> + input_endpoint.bus_type == V4L2_MBUS_BT656) {
> >> + csi2dc->parallel_mode = true;
> >> + dev_dbg(csi2dc->dev,
> >> + "subdevice connected on parallel interface\n");
> >> + }
> >> +
> >> + if (input_endpoint.bus_type == V4L2_MBUS_CSI2_DPHY) {
> >> + csi2dc->clk_gated = input_endpoint.bus.mipi_csi2.flags &
> >> + V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
> >> + dev_dbg(csi2dc->dev,
> >> + "subdevice connected on serial interface\n");
> >> + dev_dbg(csi2dc->dev, "DT: %s clock\n",
> >> + csi2dc->clk_gated ? "gated" : "free running");
> >> + }
> >> +
> >> + output_fwnode = fwnode_graph_get_next_endpoint
> >> + (of_fwnode_handle(of_node), input_fwnode);
> >> +
> >> + if (output_fwnode)
> >> + ret = v4l2_fwnode_endpoint_parse(output_fwnode,
> >> + &output_endpoint);
> >> +
> >> + fwnode_handle_put(output_fwnode);
> >> +
> >> + if (!output_fwnode || ret) {
> >> + dev_info(csi2dc->dev,
> >> + "missing output node at %pOF, data pipe available only.\n",
> >> + of_node);
> >> + } else {
> >> + if (output_endpoint.bus_type != V4L2_MBUS_PARALLEL &&
> >> + output_endpoint.bus_type != V4L2_MBUS_BT656) {
> >> + dev_err(csi2dc->dev,
> >> + "output port must be parallel/bt656.\n");
> >> + ret = -EINVAL;
> >> + goto csi2dc_of_parse_err;
> >> + }
> >> +
> >> + csi2dc->video_pipe = true;
> >> +
> >> + dev_dbg(csi2dc->dev,
> >> + "block %pOF [%d.%d]->[%d.%d] video pipeline\n",
> >> + of_node, input_endpoint.base.port,
> >> + input_endpoint.base.id, output_endpoint.base.port,
> >> + output_endpoint.base.id);
> >> + }
> >> +
> >> + /* prepare async notifier for subdevice completion */
> >> + return csi2dc_prepare_notifier(csi2dc, input_fwnode);
> >> +
> >> +csi2dc_of_parse_err:
> >> + fwnode_handle_put(input_fwnode);
> >> + return ret;
> >> +}
> >> +
> >> +static void csi2dc_default_format(struct csi2dc_device *csi2dc)
> >> +{
> >> + csi2dc->cur_fmt = &csi2dc_formats[0];
> >> +
> >> + csi2dc->format.height = 480;
> >> + csi2dc->format.width = 640;
> >> + csi2dc->format.code = csi2dc_formats[0].mbus_code;
> >> + csi2dc->format.colorspace = V4L2_COLORSPACE_SRGB;
> >> + csi2dc->format.field = V4L2_FIELD_NONE;
> >> + csi2dc->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> >> + csi2dc->format.quantization = V4L2_QUANTIZATION_DEFAULT;
> >> + csi2dc->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
> >> +}
> >> +
> >> +static int csi2dc_probe(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + struct csi2dc_device *csi2dc;
> >> + int ret = 0;
> >> + u32 ver;
> >> +
> >> + csi2dc = devm_kzalloc(dev, sizeof(*csi2dc), GFP_KERNEL);
> >> + if (!csi2dc)
> >> + return -ENOMEM;
> >> +
> >> + csi2dc->dev = dev;
> >> +
> >> + csi2dc->base = devm_platform_ioremap_resource(pdev, 0);
> >> + if (IS_ERR(csi2dc->base)) {
> >> + dev_err(dev, "base address not set\n");
> >> + return PTR_ERR(csi2dc->base);
> >> + }
> >> +
> >> + csi2dc->pclk = devm_clk_get(dev, "pclk");
> >> + if (IS_ERR(csi2dc->pclk)) {
> >> + ret = PTR_ERR(csi2dc->pclk);
> >> + dev_err(dev, "failed to get pclk: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + csi2dc->scck = devm_clk_get(dev, "scck");
> >> + if (IS_ERR(csi2dc->scck)) {
> >> + ret = PTR_ERR(csi2dc->scck);
> >> + dev_err(dev, "failed to get scck: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + v4l2_subdev_init(&csi2dc->csi2dc_sd, &csi2dc_subdev_ops);
> >> +
> >> + csi2dc->csi2dc_sd.owner = THIS_MODULE;
> >> + csi2dc->csi2dc_sd.dev = dev;
> >> + snprintf(csi2dc->csi2dc_sd.name, sizeof(csi2dc->csi2dc_sd.name),
> >> + "csi2dc");
> >> +
> >> + csi2dc->csi2dc_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> >> + csi2dc->csi2dc_sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> >> +
> >> + platform_set_drvdata(pdev, csi2dc);
> >> +
> >> + ret = csi2dc_of_parse(csi2dc, dev->of_node);
> >> + if (ret)
> >> + goto csi2dc_probe_cleanup_entity;
> >> +
> >> + csi2dc->pads[CSI2DC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> >> + if (csi2dc->video_pipe)
> >> + csi2dc->pads[CSI2DC_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> >> +
> >> + ret = media_entity_pads_init(&csi2dc->csi2dc_sd.entity,
> >> + csi2dc->video_pipe ? CSI2DC_PADS_NUM : 1,
> >> + csi2dc->pads);
> >> + if (ret < 0) {
> >> + dev_err(dev, "media entity init failed\n");
> >> + goto csi2dc_probe_cleanup_notifier;
> >> + }
> >> +
> >> + csi2dc_default_format(csi2dc);
> >> +
> >> + /* turn power on to validate capabilities */
> >> + ret = csi2dc_power(csi2dc, true);
> >> + if (ret < 0)
> >> + goto csi2dc_probe_cleanup_notifier;
> >> +
> >> + pm_runtime_set_active(dev);
> >> + pm_runtime_enable(dev);
> >> + ver = csi2dc_readl(csi2dc, CSI2DC_VERSION);
> >
> > Shouldn't you verify that the version is the expected one, or that, at
> > least the device can be accessed ?
>
> If the read from the register worked, the device can be accessed. If the
> device won't respond to this, we will get a bus fault or a freeze.
> And printing the version number can help all the time by inspecting the
> bootlog to see if something valid was printed.
> Version changes from product to product but seeing a bootlog later will
> make us easily understand which product was it, and if the version was
> read correctly
>
> >
> >> + pm_request_idle(dev);
> >
> > I'm not well versed when it comes to runtime_pm but I can read that
> >
> > Documentation/power/runtime_pm.rst- `int pm_request_idle(struct device *dev);`
> > Documentation/power/runtime_pm.rst- - submit a request to execute the subsystem-level idle callback for the
> > Documentation/power/runtime_pm.rst- device (the request is represented by a work item in pm_wq); returns 0 on
> > Documentation/power/runtime_pm.rst- success or error code if the request has not been queued up
> >
> > And looking below you have
> >
> > +static const struct dev_pm_ops csi2dc_dev_pm_ops = {
> > + SET_RUNTIME_PM_OPS(csi2dc_runtime_suspend, csi2dc_runtime_resume, NULL)
> > +};
> >
> > Which expands to
> >
> > include/linux/pm.h: SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
> >
> > so it seems to me you've no idle func defined, hence you above call
> > has no effect so you're device stays powered on after your above call
> > to
> >
> > ret = csi2dc_power(csi2dc, true);
> >
> > Also trying to suspend using runtime_pm while having powered on by
> > calling the resume function directly would leave the pm status
> > unbalanced ?
> >
> > I would raher call pm_runtime_resume() and
> > pm_runtime_suspend() or call the power routine directly, and later
> > enable pm_runtime
> >
> > csi2dc_power(true)
> > readl();
> > csi2fd_power(false);
> >
> > pm_runtime_set_active();
> > pm_runtime_enable();
> >
> > v4l2_async_register();
> >
> > Again, not well versed in runtime_pm, so don't assume the above makes
> > sense :)
>
> I am not versed in runtime_pm either, I will try to remove this
> 'pm_request_idle' to see what happens at the first
> pm_runtime_resume_and_get, and print messages in power on/power off to
> see how and when they are called.
>
>
>
> >
> >> +
> >> + /*
> >> + * we must register the subdev after PM runtime has been requested,
> >> + * otherwise we might bound immediately and request pm_runtime_resume
> >> + * before runtime_enable.
> >> + */
> >> + ret = v4l2_async_register_subdev(&csi2dc->csi2dc_sd);
> >> + if (ret) {
> >> + dev_err(csi2dc->dev, "failed to register the subdevice\n");
> >> + goto csi2dc_probe_cleanup_notifier;
> >> + }
> >> +
> >> + dev_info(dev, "Microchip CSI2DC version %x\n", ver);
> >> +
> >> + return 0;
> >> +
> >> +csi2dc_probe_cleanup_notifier:
> >> + v4l2_async_nf_cleanup(&csi2dc->notifier);
> >> +csi2dc_probe_cleanup_entity:
> >> + media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
> >
> > I wasn't honestly expecting this
> >
> > /**
> > * media_entity_cleanup() - free resources associated with an entity
> > *
> > * @entity: entity where the pads belong
> > *
> > * This function must be called during the cleanup phase after unregistering
> > * the entity (currently, it does nothing).
> > */
> > #if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
> > static inline void media_entity_cleanup(struct media_entity *entity) {}
> >
> > :)
>
> I saw it as well. But I thought that who knows, in the future it might
> do something, so it's better to have it in the driver rather than not
> have it at all.
>
>
> Thanks again for reviewing,
> Eugen
>
> >
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int csi2dc_remove(struct platform_device *pdev)
> >> +{
> >> + struct csi2dc_device *csi2dc = platform_get_drvdata(pdev);
> >> +
> >> + pm_runtime_disable(&pdev->dev);
> >> +
> >> + v4l2_async_unregister_subdev(&csi2dc->csi2dc_sd);
> >> + v4l2_async_nf_unregister(&csi2dc->notifier);
> >> + v4l2_async_nf_cleanup(&csi2dc->notifier);
> >> + media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int __maybe_unused csi2dc_runtime_suspend(struct device *dev)
> >> +{
> >> + struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
> >> +
> >> + return csi2dc_power(csi2dc, false);
> >> +}
> >> +
> >> +static int __maybe_unused csi2dc_runtime_resume(struct device *dev)
> >> +{
> >> + struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
> >> +
> >> + return csi2dc_power(csi2dc, true);
> >> +}
> >> +
> >> +static const struct dev_pm_ops csi2dc_dev_pm_ops = {
> >> + SET_RUNTIME_PM_OPS(csi2dc_runtime_suspend, csi2dc_runtime_resume, NULL)
> >> +};
> >> +
> >> +static const struct of_device_id csi2dc_of_match[] = {
> >> + { .compatible = "microchip,sama7g5-csi2dc" },
> >> + { }
> >> +};
> >> +
> >> +MODULE_DEVICE_TABLE(of, csi2dc_of_match);
> >> +
> >> +static struct platform_driver csi2dc_driver = {
> >> + .probe = csi2dc_probe,
> >> + .remove = csi2dc_remove,
> >> + .driver = {
> >> + .name = "microchip-csi2dc",
> >> + .pm = &csi2dc_dev_pm_ops,
> >> + .of_match_table = of_match_ptr(csi2dc_of_match),
> >> + },
> >> +};
> >> +
> >> +module_platform_driver(csi2dc_driver);
> >> +
> >> +MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
> >> +MODULE_DESCRIPTION("Microchip CSI2 Demux Controller driver");
> >> +MODULE_LICENSE("GPL v2");
> >> --
> >> 2.25.1
> >>
>

\
 
 \ /
  Last update: 2021-12-06 13:07    [W:0.313 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site