lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: mpc: Use atomic read and fix break condition
Date
Maxime points out that the polling code in mpc_i2c_isr should use the
_atomic API because it is called in an irq context and that the
behaviour of the MCF bit is that it is 1 when the byte transfer is
complete. All of this means the original code was effectively a
udelay(100).

Fix this by using readb_poll_timeout_atomic() and removing the negation
of the break condition.

Fixes: 4a8ac5e45cda ("i2c: mpc: Poll for MCF")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Maxime,

Can you give this a test on your setup. I've tried it on the setup where
I had the original problem that led to 4a8ac5e45cda and it seems OK so
far (I'll leave my test running overnight).

drivers/i2c/busses/i2c-mpc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a6ea1eb1394e..53b8da6dbb23 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -636,7 +636,7 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
status = readb(i2c->base + MPC_I2C_SR);
if (status & CSR_MIF) {
/* Wait up to 100us for transfer to properly complete */
- readb_poll_timeout(i2c->base + MPC_I2C_SR, status, !(status & CSR_MCF), 0, 100);
+ readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100);
writeb(0, i2c->base + MPC_I2C_SR);
mpc_i2c_do_intr(i2c, status);
return IRQ_HANDLED;
--
2.34.1
\
 
 \ /
  Last update: 2021-12-07 05:23    [W:0.052 / U:1.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site