lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] remoteproc: qcom: Don't memcpy_toio more than is provided
On Mon 06 Dec 16:01 PST 2021, Doug Anderson wrote:

> Hi,
>
> On Tue, Nov 16, 2021 at 10:55 PM Stephen Boyd <swboyd@chromium.org> wrote:
> >
> > If the string passed into qcom_pil_info_store() isn't as long as
> > PIL_RELOC_NAME_LEN we'll try to copy the string assuming the length is
> > PIL_RELOC_NAME_LEN to the io space and go beyond the bounds of the
> > string. Let's only copy as many byes as the string is long, ignoring the
> > NUL terminator.
> >
> > This fixes the following KASAN error:
> >
> > BUG: KASAN: global-out-of-bounds in __memcpy_toio+0x124/0x140
> > Read of size 1 at addr ffffffd35086e386 by task rmtfs/2392
> >
> > CPU: 2 PID: 2392 Comm: rmtfs Tainted: G W 5.16.0-rc1-lockdep+ #10
> > Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
> > Call trace:
> > dump_backtrace+0x0/0x410
> > show_stack+0x24/0x30
> > dump_stack_lvl+0x7c/0xa0
> > print_address_description+0x78/0x2bc
> > kasan_report+0x160/0x1a0
> > __asan_report_load1_noabort+0x44/0x50
> > __memcpy_toio+0x124/0x140
> > qcom_pil_info_store+0x298/0x358 [qcom_pil_info]
> > q6v5_start+0xdf0/0x12e0 [qcom_q6v5_mss]
> > rproc_start+0x178/0x3a0
> > rproc_boot+0x5f0/0xb90
> > state_store+0x78/0x1bc
> > dev_attr_store+0x70/0x90
> > sysfs_kf_write+0xf4/0x118
> > kernfs_fop_write_iter+0x208/0x300
> > vfs_write+0x55c/0x804
> > ksys_pwrite64+0xc8/0x134
> > __arm64_compat_sys_aarch32_pwrite64+0xc4/0xdc
> > invoke_syscall+0x78/0x20c
> > el0_svc_common+0x11c/0x1f0
> > do_el0_svc_compat+0x50/0x60
> > el0_svc_compat+0x5c/0xec
> > el0t_32_sync_handler+0xc0/0xf0
> > el0t_32_sync+0x1a4/0x1a8
> >
> > The buggy address belongs to the variable:
> > .str.59+0x6/0xffffffffffffec80 [qcom_q6v5_mss]
> >
> > Memory state around the buggy address:
> > ffffffd35086e280: 00 00 00 00 02 f9 f9 f9 f9 f9 f9 f9 00 00 00 00
> > ffffffd35086e300: 00 02 f9 f9 f9 f9 f9 f9 00 00 00 06 f9 f9 f9 f9
> > >ffffffd35086e380: 06 f9 f9 f9 05 f9 f9 f9 00 00 00 00 00 06 f9 f9
> > ^
> > ffffffd35086e400: f9 f9 f9 f9 01 f9 f9 f9 04 f9 f9 f9 00 00 01 f9
> > ffffffd35086e480: f9 f9 f9 f9 00 00 00 00 00 00 00 01 f9 f9 f9 f9
> >
> > Fixes: 549b67da660d ("remoteproc: qcom: Introduce helper to store pil info in IMEM")
> > Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> > ---
> > drivers/remoteproc/qcom_pil_info.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/remoteproc/qcom_pil_info.c b/drivers/remoteproc/qcom_pil_info.c
> > index 7c007dd7b200..aca21560e20b 100644
> > --- a/drivers/remoteproc/qcom_pil_info.c
> > +++ b/drivers/remoteproc/qcom_pil_info.c
> > @@ -104,7 +104,7 @@ int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size)
> > return -ENOMEM;
> >
> > found_unused:
> > - memcpy_toio(entry, image, PIL_RELOC_NAME_LEN);
> > + memcpy_toio(entry, image, strnlen(image, PIL_RELOC_NAME_LEN));
>
> The above seems slightly sketchy...
>
> Let's say:
>
> image = "modem" (5 characters plus null termination)
> PIL_RELOC_NAME_LEN = 8
>
> ...so strnlen(image, 8) = 5, right?
> ...so we'll copy characters _not_ including the NULL termination.
>
> I guess that's OK as long as we're certain that the destination was
> zero-initted, but maybe it would be better/safer to write:
>
> memcpy_toio(entry, image, strnlen(image, PIL_RELOC_NAME_LEN - 1) + 1);
>

Yes, I agree that it looks a little bit sketchy.

But we have to assume that either there's remnants from the boot stages
or perhaps remnants of stale data from before a reboot. Therefor I
concluded as I wrote this that I had to memset() the entire region in
qcom_pil_info_init(), so this is taken care of.

The region being zero-initialized is also a requirement for the
conditional jump to "found_unused" based on !buf[0]...

Regards,
Bjorn

\
 
 \ /
  Last update: 2021-12-07 01:24    [W:3.480 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site