lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RESEND, PATCH v6 1/2] dt-bindings: iio: dac: Add adi,ad3552r.yaml
On Mon, Dec 06, 2021 at 04:35:29PM +0000, Mihail Chindris wrote:
> Add documentation for ad3552r
>
> Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
> ---
> .../bindings/iio/dac/adi,ad3552r.yaml | 190 ++++++++++++++++++
> 1 file changed, 190 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> new file mode 100644
> index 000000000000..c6999bb4c7a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
> @@ -0,0 +1,190 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2020 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD2552R DAC device driver
> +
> +maintainers:
> + - Mihail Chindris <mihail.chindris@analog.com>
> +
> +description: |
> + Bindings for the Analog Devices AD3552R DAC device and similar.
> + Datasheet can be found here:
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
blank line

> +properties:
> + compatible:
> + enum:
> + - adi,ad3542r
> + - adi,ad3552r
> +
> + reg:
> + maxItems: 1
> +
> + spi-max-frequency:
> + maximum: 30000000
> +
> + reset-gpios:
> + maxItems: 1
> +
> + ldac-gpios:
> + description: |
> + LDAC pin to be used as a hardware trigger to update the DAC channels.
> + maxItems: 1
> +
> + vref-supply:
> + description:
> + The regulator to use as an external reference. If it does not exists the
> + internal reference will be used. External reference must be 2.5V
> +
> + adi,vref-out-en:
> + description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
> + will be floating.
> + type: boolean
> +
> + adi,sdo-drive-strength:
> + description: |
> + Configure SDIO0 and SDIO1 strength levels:
> + - 0: low SDO drive strength.
> + - 1: medium low SDO drive strength.
> + - 2: medium high SDO drive strength.
> + - 3: high SDO drive strength
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> +patternProperties:
> + "^channel@([0-1])$":
> + type: object
> + description: Configurations of the DAC Channels

additionalProperties: false

> + properties:
> + reg:
> + description: Channel number
> + enum: [0, 1]

With that, you will need:

adi,output-range-microvolt: true

> +
> + custom-output-range-config:
> + type: object

Why does this need to be in a child node?

> + description: Configuration of custom range when
> + adi,output-range-microvolt is not present.
> + The formulas for calculation the output voltages are
> + Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
> + Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]

blank line

> + properties:
> + adi,gain-offset:
> + description: Gain offset used in the above formula
> + $ref: /schemas/types.yaml#/definitions/int32
> + maximum: 511
> + minimum: -511

blank line, and so on...

> + adi,gain-scaling-p-inv-log2:
> + description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> + adi,gain-scaling-n-inv-log2:
> + description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> + adi,rfb-ohms:
> + description: Feedback Resistor
> + required:
> + - adi,gain-offset
> + - adi,gain-scaling-p-inv-log2
> + - adi,gain-scaling-n-inv-log2
> + - adi,rfb-ohms
> + required:
> + - reg
> +
> + oneOf:
> + # If adi,output-range-microvolt is missing,
> + # custom-output-range-config must be used
> + - required:
> + - adi,output-range-microvolt
> + - required:
> + - custom-output-range-config
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: adi,ad3542r
> + then:
> + patternProperties:
> + "^channel@([0-1])$":
> + type: object
> + properties:
> + adi,output-range-microvolt:
> + description: |
> + Voltage output range of the channel as <minimum, maximum>
> + Required connections:
> + Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
> + Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
> + oneOf:
> + - items:
> + - const: 0
> + - enum: [2500000, 3000000, 5000000, 10000000]
> + - items:
> + - const: -2500000
> + - const: 7500000
> + - items:
> + - const: -5000000
> + - const: 5000000
> + required:
> + - adi,output-range-microvolt
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: adi,ad3552r
> + then:
> + patternProperties:
> + "^channel@([0-1])$":
> + type: object
> + properties:
> + adi,output-range-microvolt:
> + description: |
> + Voltage output range of the channel as <minimum, maximum>
> + Required connections:
> + Rfb1x for: 0 to 2.5 V; 0 to 5 V;
> + Rfb2x for: 0 to 10 V; -5 to 5 V;
> + Rfb4x for: -10 to 10V
> + oneOf:
> + - items:
> + - const: 0
> + - enum: [2500000, 5000000, 10000000]
> + - items:
> + - const: -5000000
> + - const: 5000000
> + - items:
> + - const: -10000000
> + - const: 10000000
> +
> +required:
> + - compatible
> + - reg
> + - spi-max-frequency
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + ad3552r {
> + compatible = "adi,ad3552r";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + channel@0 {
> + reg = <0>;
> + adi,output-range-microvolt = <0 10000000>;
> + };
> + channel@1 {
> + reg = <1>;
> + custom-output-range-config {
> + adi,gain-offset = <5>;
> + adi,gain-scaling-p-inv-log2 = <1>;
> + adi,gain-scaling-n-inv-log2 = <2>;
> + adi,rfb-ohms = <1>;
> + };
> + };
> + };
> +...
> --
> 2.27.0
>
>

\
 
 \ /
  Last update: 2021-12-06 22:42    [W:0.099 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site