lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 3/9] arm64: dts: meson: add initial device-trees for X96-AIR
On Tue, Nov 30, 2021 at 7:07 AM Christian Hewitt
<christianshewitt@gmail.com> wrote:
>
> The Amediatek X96-AIR is based on Amlogic S905X3 reference board
> designs and ships in multiple configurations:
>
> – 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
> – 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
> – 4GB DDR3 + 32GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
> – 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
> ...
> - HDMI 2.1 video
> - S/PDIF optical output
> - AV output
> - 2x USB 2.0 inc. OTG port
> - 1x USB 3.0 port
> - IR receiver
> - 1x micro SD card slot (internal)
> - 1x Reset/Update button (in AV jack)
> - 7-segment VFD
>
> The device-tree with -100 suffix supports models with 10/100 Ethernet
> and with -1000 suffix supports models with Gigabit Ethernet.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #
X96-Air with Gbit/s PHY

\
 
 \ /
  Last update: 2021-12-06 22:35    [W:0.134 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site