lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings
On Sat, 04 Dec 2021 21:57:53 +0200, Sam Protsenko wrote:
> Add constants for choosing USIv2 configuration mode in device tree.
> Those are further used in USI driver to figure out which value to write
> into SW_CONF register. Also document USIv2 IP-core bindings.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
> Changes in v3:
> - Removed usi0 "status" property from the example
> - Made child nodes pattern allow only serial/spi/i2c node names
> - Moved all USIv2 specific properties under corresponding "if:"
> - Renamed compatible from samsung,exynos-usi-v2 to samsung,exynos850-usi
> - Related: submitted separate patch removing warning on
> "make dt_binding_check" for USI bindings
>
> Changes in v2:
> - Combined dt-bindings doc and dt-bindings header patches
> - Added i2c node to example in bindings doc
> - Added mentioning of shared internal circuits
> - Added USI_V2_NONE value to bindings header
>
> .../bindings/soc/samsung/exynos-usi.yaml | 159 ++++++++++++++++++
> include/dt-bindings/soc/samsung,exynos-usi.h | 17 ++
> 2 files changed, 176 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
> create mode 100644 include/dt-bindings/soc/samsung,exynos-usi.h
>

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2021-12-06 22:03    [W:0.124 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site