lkml.org 
[lkml]   [2021]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/4] can: hi311x: try to get crystal clock rate from property
Date
In some configurations, mainly ACPI-based, the clock frequency of the
device is supplied by very well established 'clock-frequency'
property. Hence, try to get it from the property at last if no other
providers are available.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/net/can/spi/hi311x.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c
index 13fb979645cf..1e4ff904be0f 100644
--- a/drivers/net/can/spi/hi311x.c
+++ b/drivers/net/can/spi/hi311x.c
@@ -828,19 +828,26 @@ MODULE_DEVICE_TABLE(spi, hi3110_id_table);

static int hi3110_can_probe(struct spi_device *spi)
{
- const struct of_device_id *of_id = of_match_device(hi3110_of_match,
- &spi->dev);
+ struct device *dev = &spi->dev;
struct net_device *net;
struct hi3110_priv *priv;
struct clk *clk;
- int freq, ret;
+ u32 freq;
+ int ret;

clk = devm_clk_get_optional(&spi->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&spi->dev, "no CAN clock source defined\n");
return PTR_ERR(clk);
}
- freq = clk_get_rate(clk);
+
+ if (clk) {
+ freq = clk_get_rate(clk);
+ } else {
+ ret = device_property_read_u32(dev, "clock-frequency", &freq);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get clock-frequency!\n");
+ }

/* Sanity check */
if (freq > 40000000)
--
2.33.0
\
 
 \ /
  Last update: 2021-12-06 17:23    [W:0.043 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site