lkml.org 
[lkml]   [2021]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/7] Support for some TQMa8M* boards
On Wed, Dec 01, 2021 at 08:29:41AM +0100, Alexander Stein wrote:
> Thanks for the review on v2!
>
> Changes in v3:
> * Rebased to next-20211129
> * Adjusted commit subjects (tree -> device tree)
> * Use hyphen in node names instead of underscore
> * Removed bootargs from DT
> * Fixed audio-codec node name and handle name
> * Property 'enet-phy-lane-no-swap' was already documented, but got accidently
> removed during YAML conversion. Fix is pending at at [2]
> * Use matrix instead of array for 'fsl,pins' as required by pinctrl bindings.
> This reduces the lines in stderr from dtbs_check for these DT files from 475
> down to 191
> * Removed TODO regarding unsupported USB over-current polarity
>
> Changes in v2:
> * Rebased to next-20211101
> * Added Rob's Acked-By on Patch for DT bindings
> * for other changes please refer to individual patches
>
> Note on TQMa8Mx:
> Due to CPU errata cpuidle is broken and needs to be disabled, see [1] for
> pending patch.
>
> This patch set adds support for the following modules:
> * TQMa8Mx
> * TQMa8MxML
> * TQMa8MxNL
>
> Each of the modules is available with different i.MX8M variants, the
> bootloader modifies the device tree and disabled paripherals which
> are not available on the actual hardware.
>
> All of them can be attached to the same mainboard MBa8Mx, although
> TQMa8MxML & TQMa8MxNL need an adapter. For that reason there is a single
> mainboard .dtsi file named mba8mx.dtsi.
>
> There is a .dtsi file for each module named imx8m?-tmqa8m*.dts.
>
> Finally there is the final .dts file which includes the mainboard and
> the attached module and contains the missing connection, prominently clk
> and pinctrl defines.
>
> [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20211105095535.3920998-1-alexander.stein@ew.tq-group.com/
> [2] https://www.spinics.net/lists/devicetree/msg460023.html
>
> Alexander Stein (7):
> dt-bindings: arm: fsl: add TQMa8MxML boards
> arm64: dts: freescale: add initial device tree for TQMa8MQML with
> i.MX8MM
> arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
> dt-bindings: arm: fsl: add TQMa8MxNL boards
> arm64: dts: freescale: add initial device tree for TQMa8MQNL with
> i.MX8MN
> dt-bindings: arm: fsl: add TQMa8Mx boards
> arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M

Applied all, thanks!

\
 
 \ /
  Last update: 2021-12-06 04:40    [W:0.157 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site