lkml.org 
[lkml]   [2021]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
On Mon, Dec 06, 2021 at 03:01:12AM +0000, Peng Fan wrote:
> Hi Shawn,
>
> > Subject: Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for
> > imx8ulp
> >
> > On Fri, Nov 26, 2021 at 03:40:01PM +0800, Peng Fan (OSS) wrote:
> > > From: Jacky Bai <ping.bai@nxp.com>
> > >
> > > Add the basic dtsi support for i.MX8ULP.
> > >
> > > i.MX 8ULP is part of the ULP family with emphasis on extreme low-power
> > > techniques using the 28 nm fully depleted silicon on insulator
> > > process. Like i.MX 7ULP, i.MX 8ULP continues to be based on asymmetric
> > > architecture, however will add a third DSP domain for advanced
> > > voice/audio capability and a Graphics domain where it is possible to
> > > access graphics resources from the application side or the realtime
> > > side.
> > >
> > > Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
> > > Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> > > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > > Reviewed-by: Rob Herring <robh@kernel.org>
> > > ---
> > >
> > > - v6
> > > rebase
> > >
> > > - v5
> > > Add R-b tag
> > >
> > > - v4
> > > Fix build error after rebase
> > > Drop usb nodes and alias, drop fec node
> > >
> > > - v3 changes:
> > > no
> > >
> > > - v2 changes:
> > > update the license
> > > update the compatible property for usb related node
> > >
> > >
> > > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978
> > ++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++
> > > 2 files changed, 1374 insertions(+)
> > > create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
> > > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> >
> > <snip>
> >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> > > b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> > > new file mode 100644
> > > index 000000000000..fb8714379026
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> > > @@ -0,0 +1,396 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Copyright 2021 NXP
> > > + */
> > > +
> > > +#include <dt-bindings/clock/imx8ulp-clock.h>
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +
> > > +#include "imx8ulp-pinfunc.h"
> > > +
> > > +/ {
> > > + interrupt-parent = <&gic>;
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > +
> > > + aliases {
> > > + gpio0 = &gpiod;
> > > + gpio1 = &gpioe;
> > > + gpio2 = &gpiof;
> > > + mmc0 = &usdhc0;
> > > + mmc1 = &usdhc1;
> > > + mmc2 = &usdhc2;
> > > + serial0 = &lpuart4;
> > > + serial1 = &lpuart5;
> > > + serial2 = &lpuart6;
> > > + serial3 = &lpuart7;
> > > + };
> > > +
> > > + cpus {
> > > + #address-cells = <2>;
> > > + #size-cells = <0>;
> > > +
> > > + A35_0: cpu@0 {
> > > + device_type = "cpu";
> > > + compatible = "arm,cortex-a35";
> > > + reg = <0x0 0x0>;
> > > + enable-method = "psci";
> > > + next-level-cache = <&A35_L2>;
> > > + };
> > > +
> > > + A35_1: cpu@1 {
> > > + device_type = "cpu";
> > > + compatible = "arm,cortex-a35";
> > > + reg = <0x0 0x1>;
> > > + enable-method = "psci";
> > > + next-level-cache = <&A35_L2>;
> > > + };
> > > +
> > > + A35_L2: l2-cache0 {
> > > + compatible = "cache";
> > > + };
> > > + };
> > > +
> > > + gic: interrupt-controller@2d400000 {
> > > + compatible = "arm,gic-v3";
> > > + reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
> > > + <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base)
> > */
> > > + #interrupt-cells = <3>;
> > > + interrupt-controller;
> > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > > + };
> > > +
> > > + psci {
> > > + compatible = "arm,psci-1.0";
> > > + method = "smc";
> > > + };
> > > +
> > > + timer {
> > > + compatible = "arm,armv8-timer";
> > > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical
> > Secure */
> > > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical
> > Non-Secure */
> > > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
> > > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
> > > + };
> > > +
> > > + frosc: clock-frosc {
> > > + compatible = "fixed-clock";
> > > + clock-frequency = <192000000>;
> > > + clock-output-names = "frosc";
> > > + #clock-cells = <0>;
> > > + };
> > > +
> > > + lposc: clock-lposc {
> > > + compatible = "fixed-clock";
> > > + clock-frequency = <1000000>;
> > > + clock-output-names = "lposc";
> > > + #clock-cells = <0>;
> > > + };
> > > +
> > > + rosc: clock-rosc {
> > > + compatible = "fixed-clock";
> > > + clock-frequency = <32768>;
> > > + clock-output-names = "rosc";
> > > + #clock-cells = <0>;
> > > + };
> > > +
> > > + sosc: clock-sosc {
> > > + compatible = "fixed-clock";
> > > + clock-frequency = <24000000>;
> > > + clock-output-names = "sosc";
> > > + #clock-cells = <0>;
> > > + };
> > > +
> > > + soc@0 {
> > Why do we need unit-address @0 here?
>
> I found there is patch which adds unit address, so I think we need @0 here.

Ah, okay, I will have to keep reminding myself that ranges requires
unit-address as well.

> commit 951c1d37f691027f149bbc58bbf0c207450a3654
> Author: Fabio Estevam <festevam@gmail.com>
> Date: Tue May 28 16:00:21 2019 -0300
>
> arm64: dts: imx8mm: Pass a unit name for the 'soc' node
>
> The 'soc' name needs a unit name to match its 'ranges' property.
>
> Pass the unit name in order to fix the following dtc build warning
> with W=1:
>
> arch/arm64/boot/dts/freescale/imx8mm.dtsi:203.6-754.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> This also aligns with imx8mq.dtsi.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
>
> >
> > > + compatible = "simple-bus";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges = <0x0 0x0 0x0 0x40000000>;
> > > +
> > > + per_bridge3: bus@29000000 {
> > > + compatible = "simple-bus";
> > > + reg = <0x29000000 0x800000>;
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges;
> > > +
> > > + wdog3: watchdog@292a0000 {
> > > + compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
> > > + reg = <0x292a0000 0x10000>;
> > > + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
> > > + assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
> > > + assigned-clock-parents = <&cgc1
> > IMX8ULP_CLK_SOSC_DIV2>;
> > > + timeout-sec = <40>;
> > > + };
> > > +
> > > + cgc1: clock-controller@292c0000 {
> > > + compatible = "fsl,imx8ulp-cgc1";
> > > + reg = <0x292c0000 0x10000>;
> > > + clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
> > > + clock-names = "rosc", "sosc", "frosc", "lposc";
> > > + #clock-cells = <1>;
> > > + };
> > > +
> > > + pcc3: clock-controller@292d0000 {
> > > + compatible = "fsl,imx8ulp-pcc3";
> > > + reg = <0x292d0000 0x10000>;
> > > + #clock-cells = <1>;
> > > + };
> > > +
> > > + tpm5: tpm@29340000 {
> > > + compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
> > > + reg = <0x29340000 0x1000>;
> > > + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
> > > + <&pcc3 IMX8ULP_CLK_TPM5>;
> > > + clock-names = "ipg", "per";
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpi2c4: i2c@29370000 {
> > > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
> > > + reg = <0x29370000 0x10000>;
> > > + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
> > > + <&pcc3 IMX8ULP_CLK_LPI2C4>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
> > > + assigned-clock-parents = <&cgc1
> > IMX8ULP_CLK_XBAR_DIVBUS>;
> > > + assigned-clock-rates = <48000000>;
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpi2c5: i2c@29380000 {
> > > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
> > > + reg = <0x29380000 0x10000>;
> > > + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
> > > + <&pcc3 IMX8ULP_CLK_LPI2C5>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
> > > + assigned-clock-parents = <&cgc1
> > IMX8ULP_CLK_XBAR_DIVBUS>;
> > > + assigned-clock-rates = <48000000>;
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpuart4: serial@29390000 {
> > > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
> > > + reg = <0x29390000 0x1000>;
> > > + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
> > > + clock-names = "ipg";
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpuart5: serial@293a0000 {
> > > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
> > > + reg = <0x293a0000 0x1000>;
> > > + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
> > > + clock-names = "ipg";
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpspi4: spi@293b0000 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
> > > + reg = <0x293b0000 0x10000>;
> > > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
> > > + <&pcc3 IMX8ULP_CLK_LPSPI4>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
> > > + assigned-clock-parents = <&cgc1
> > IMX8ULP_CLK_XBAR_DIVBUS>;
> > > + assigned-clock-rates = <16000000>;
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpspi5: spi@293c0000 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
> > > + reg = <0x293c0000 0x10000>;
> > > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
> > > + <&pcc3 IMX8ULP_CLK_LPSPI5>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
> > > + assigned-clock-parents = <&cgc1
> > IMX8ULP_CLK_XBAR_DIVBUS>;
> > > + assigned-clock-rates = <16000000>;
> > > + status = "disabled";
> > > + };
> > > + };
> > > +
> > > + per_bridge4: bus@29800000 {
> > > + compatible = "simple-bus";
> > > + reg = <0x29800000 0x800000>;
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges;
> > > +
> > > + pcc4: clock-controller@29800000 {
> > > + compatible = "fsl,imx8ulp-pcc4";
> > > + reg = <0x29800000 0x10000>;
> > > + #clock-cells = <1>;
> > > + };
> > > +
> > > + lpi2c6: i2c@29840000 {
> > > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
> > > + reg = <0x29840000 0x10000>;
> > > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
> > > + <&pcc4 IMX8ULP_CLK_LPI2C6>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
> > > + assigned-clock-parents = <&cgc1
> > IMX8ULP_CLK_XBAR_DIVBUS>;
> > > + assigned-clock-rates = <48000000>;
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpi2c7: i2c@29850000 {
> > > + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
> > > + reg = <0x29850000 0x10000>;
> > > + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
> > > + <&pcc4 IMX8ULP_CLK_LPI2C7>;
> > > + clock-names = "per", "ipg";
> > > + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
> > > + assigned-clock-parents = <&cgc1
> > IMX8ULP_CLK_XBAR_DIVBUS>;
> > > + assigned-clock-rates = <48000000>;
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpuart6: serial@29860000 {
> > > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
> > > + reg = <0x29860000 0x1000>;
> > > + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
> > > + clock-names = "ipg";
> > > + status = "disabled";
> > > + };
> > > +
> > > + lpuart7: serial@29870000 {
> > > + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
> > > + reg = <0x29870000 0x1000>;
> > > + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
> > > + clock-names = "ipg";
> > > + status = "disabled";
> > > + };
> > > +
> > > + iomuxc1: pinctrl@298c0000 {
> > > + compatible = "fsl,imx8ulp-iomuxc1";
> >
> > I know this binding is already landed. Just curious why there is a suffix
> > number in the compatible.
>
> There is two iomuxc, one is for M33, one is for A35.
> Similar with i.MX7ULP, we use a suffix here.

Thanks for the info!

Shawn

\
 
 \ /
  Last update: 2021-12-06 04:09    [W:0.241 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site