lkml.org 
[lkml]   [2021]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 2/4] ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node
On Mon, Nov 22, 2021 at 01:43:08PM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht <robin@protonic.nl>
>
> Signed-off-by: Robin van der Gracht <robin@protonic.nl>
> ---
> arch/arm/boot/dts/imx6dl-prtvt7.dts | 40 +++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
> index be7c4cb339e7..02b53df03e6f 100644
> --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
> +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
> @@ -6,6 +6,7 @@
> /dts-v1/;
> #include "imx6dl.dtsi"
> #include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/display/sdtv-standards.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
> @@ -171,6 +172,18 @@ panel_in: endpoint {
> };
> };
>
> + connector {
> + compatible = "composite-video-connector";
> + label = "Composite0";
> + sdtv-standards = <SDTV_STD_PAL_B>;
> +
> + port {
> + comp0_out: endpoint {
> + remote-endpoint = <&tvp5150_comp0_in>;
> + };
> + };
> + };
> +
> reg_bl_12v0: regulator-bl-12v0 {
> compatible = "regulator-fixed";
> pinctrl-names = "default";
> @@ -295,6 +308,29 @@ sgtl5000: audio-codec@a {
> VDDIO-supply = <&reg_3v3>;
> VDDD-supply = <&reg_1v8>;
> };
> +
> + video@5c {
> + compatible = "ti,tvp5150";
> + reg = <0x5c>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;

Have a newline between property and child node.

Shawn

> + tvp5150_comp0_in: endpoint {
> + remote-endpoint = <&comp0_out>;
> + };
> + };
> +
> + /* Output port 2 is video output pad */
> + port@2 {
> + reg = <2>;
> + tvp5151_to_ipu1_csi0_mux: endpoint {
> + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
> + };
> + };
> + };
> };
>
> &i2c3 {
> @@ -322,6 +358,10 @@ &ipu1_di0_disp0 {
> remote-endpoint = <&display_in>;
> };
>
> +&ipu1_csi0_mux_from_parallel_sensor {
> + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
> +};
> +
> &pwm1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_pwm1>;
> --
> 2.30.2
>

\
 
 \ /
  Last update: 2021-12-06 02:05    [W:2.434 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site