lkml.org 
[lkml]   [2021]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
Date
Use reset_control_rearm() call if an error occurs in case
phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case
phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used
and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset
framework. Therefore, use of reset_control_reset() on shared reset line
should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
---
changes since v3:
- Remove unnecessary reset_control_rearm() after reset_control_reset()
failure.

drivers/phy/amlogic/phy-meson-gxl-usb2.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 2b3c0d730f20..d2f56075dc57 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -125,6 +125,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy)
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

clk_disable_unprepare(priv->clk);
+ reset_control_rearm(priv->reset);

return 0;
}
--
2.25.1
\
 
 \ /
  Last update: 2021-12-05 23:00    [W:0.061 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site