lkml.org 
[lkml]   [2021]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 1/4] Input: Add driver for Cypress Generation 5 touchscreen
Hi,


On Thu, 2 Dec 2021 22:20:18 +1000
Alistair Francis <alistair@alistair23.me> wrote:

> From: Mylène Josserand <mylene.josserand@bootlin.com>
>
> This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
> controllers. This driver supports only the I2C bus but it uses regmap
> so SPI support could be added later.
> The touchscreen can retrieve some defined zone that are handled as
> buttons (according to the hardware). That is why it handles
> button and multitouch events.
>
> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
> Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
> Message-Id: <20180703094309.18514-2-mylene.josserand@bootlin.com>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>

I finally got it working. The order of initialisation is important.
Params are copied on input_mt_init_slots() from ABS_MT* to ABS_*, so you
have to set params first.

Here is the patch i need on top of this one to make it actually work
with X (evdev and libinput is tested):

diff --git a/drivers/input/touchscreen/cyttsp5.c b/drivers/input/touchscreen/cyttsp5.c
index b5d96eb71e46..3894ec85a732 100644
--- a/drivers/input/touchscreen/cyttsp5.c
+++ b/drivers/input/touchscreen/cyttsp5.c
@@ -415,19 +415,12 @@ static int cyttsp5_setup_input_device(struct device *dev)
int max_x_tmp, max_y_tmp;
int error;

- __set_bit(EV_REL, ts->input->evbit);
-
max_x_tmp = si->sensing_conf_data.res_x;
max_y_tmp = si->sensing_conf_data.res_y;
max_x = max_x_tmp - 1;
max_y = max_y_tmp - 1;
max_p = si->sensing_conf_data.max_z;

- error = input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max,
- INPUT_MT_DROP_UNUSED | INPUT_MT_POINTER);
- if (error < 0)
- return error;
-
input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, max_p, 0, 0);
@@ -435,6 +428,11 @@ static int cyttsp5_setup_input_device(struct device *dev)
input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, MAX_AREA, 0, 0);

+ error = input_mt_init_slots(ts->input, si->tch_abs[CY_TCH_T].max,
+ INPUT_MT_DROP_UNUSED | INPUT_MT_DIRECT);
+ if (error < 0)
+ return error;
+
error = input_register_device(ts->input);
if (error < 0)
dev_err(dev, "Error, failed register input device r=%d\n", error);

\
 
 \ /
  Last update: 2021-12-04 23:33    [W:0.098 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site