lkml.org 
[lkml]   [2021]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 2/3] dt-bindings: iio: add AD74413R
On Fri,  3 Dec 2021 01:25:06 +0200
Cosmin Tanislav <demonsingur@gmail.com> wrote:

> The AD74412R and AD74413R are quad-channel, software configurable,
> input/output solutions for building and process control applications.
>
> They contain functionality for analog output, analog input, digital input,
> resistance temperature detector, and thermocouple measurements integrated
> into a single chip solution with an SPI interface.
>
> The devices feature a 16-bit ADC and four configurable 13-bit DACs to
> provide four configurable input/output channels and a suite of diagnostic
> functions.
>
> The AD74413R differentiates itself from the AD74412R by being
> HART-compatible.
>
> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>

Hi Cosmin,

Some odd alignment in the header. Otherwise looks good to me.
Given I don't think anything much has changed, you should have
picked up Rob's tag from v7. Please do so for v10 or call out why not in the change
log so Rob knows what to look at.

Thanks

Jonathan



> ---
> .../bindings/iio/addac/adi,ad74413r.yaml | 158 ++++++++++++++++++
> include/dt-bindings/iio/addac/adi,ad74413r.h | 21 +++
> 2 files changed, 179 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
> create mode 100644 include/dt-bindings/iio/addac/adi,ad74413r.h
>
> diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
> new file mode 100644
> index 000000000000..baa65a521bad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
> @@ -0,0 +1,158 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD74412R/AD74413R device
> +
> +maintainers:
> + - Cosmin Tanislav <cosmin.tanislav@analog.com>
> +
> +description: |
> + The AD74412R and AD74413R are quad-channel software configurable input/output
> + solutions for building and process control applications. They contain
> + functionality for analog output, analog input, digital input, resistance
> + temperature detector, and thermocouple measurements integrated
> + into a single chip solution with an SPI interface.
> + The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
> + four configurable input/output channels and a suite of diagnostic functions.
> + The AD74413R differentiates itself from the AD74412R by being HART-compatible.
> + https://www.analog.com/en/products/ad74412r.html
> + https://www.analog.com/en/products/ad74413r.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,ad74412r
> + - adi,ad74413r
> +
> + reg:
> + maxItems: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + spi-max-frequency:
> + maximum: 1000000
> +
> + spi-cpol: true
> +
> + interrupts:
> + maxItems: 1
> +
> + refin-supply: true
> +
> + shunt-resistor-micro-ohms:
> + description:
> + Shunt (sense) resistor value in micro-Ohms.
> + default: 100000000
> +
> +required:
> + - compatible
> + - reg
> + - spi-max-frequency
> + - spi-cpol
> + - refin-supply
> +
> +additionalProperties: false
> +
> +patternProperties:
> + "^channel@[0-3]$":
> + type: object
> + description: Represents the external channels which are connected to the device.
> +
> + properties:
> + reg:
> + description: |
> + The channel number. It can have up to 4 channels numbered from 0 to 3.
> + minimum: 0
> + maximum: 3
> +
> + adi,ch-func:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Channel function.
> + HART functions are not supported on AD74412R.
> + 0 - CH_FUNC_HIGH_IMPEDANCE
> + 1 - CH_FUNC_VOLTAGE_OUTPUT
> + 2 - CH_FUNC_CURRENT_OUTPUT
> + 3 - CH_FUNC_VOLTAGE_INPUT
> + 4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
> + 5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
> + 6 - CH_FUNC_RESISTANCE_INPUT
> + 7 - CH_FUNC_DIGITAL_INPUT_LOGIC
> + 8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
> + 9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
> + 10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
> + minimum: 0
> + maximum: 10
> + default: 0
> +
> + adi,gpo-comparator:
> + type: boolean
> + description: |
> + Whether to configure GPO as a comparator or not.
> + When not configured as a comparator, the GPO will be treated as an
> + output-only GPIO.
> +
> + required:
> + - reg
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/iio/addac/adi,ad74413r.h>
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + ad74413r@0 {
> + compatible = "adi,ad74413r";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + spi-cpol;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + interrupt-parent = <&gpio>;
> + interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
> +
> + refin-supply = <&ad74413r_refin>;
> +
> + channel@0 {
> + reg = <0>;
> +
> + adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
> + };
> +
> + channel@1 {
> + reg = <1>;
> +
> + adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
> + };
> +
> + channel@2 {
> + reg = <2>;
> +
> + adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
> + adi,gpo-comparator;
> + };
> +
> + channel@3 {
> + reg = <3>;
> +
> + adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
> + };
> + };
> + };
> +...
> diff --git a/include/dt-bindings/iio/addac/adi,ad74413r.h b/include/dt-bindings/iio/addac/adi,ad74413r.h
> new file mode 100644
> index 000000000000..a43b010f974f
> --- /dev/null
> +++ b/include/dt-bindings/iio/addac/adi,ad74413r.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef _DT_BINDINGS_ADI_AD74413R_H
> +#define _DT_BINDINGS_ADI_AD74413R_H
> +
> +#define CH_FUNC_HIGH_IMPEDANCE 0x0
> +#define CH_FUNC_VOLTAGE_OUTPUT 0x1
> +#define CH_FUNC_CURRENT_OUTPUT 0x2
> +#define CH_FUNC_VOLTAGE_INPUT 0x3

Something very odd going on with indenting in here. I can fix up whilst applying
if this is all that needs tidying up.

> +#define CH_FUNC_CURRENT_INPUT_EXT_POWER 0x4
> +#define CH_FUNC_CURRENT_INPUT_LOOP_POWER 0x5
> +#define CH_FUNC_RESISTANCE_INPUT 0x6
> +#define CH_FUNC_DIGITAL_INPUT_LOGIC 0x7
> +#define CH_FUNC_DIGITAL_INPUT_LOOP_POWER 0x8
> +#define CH_FUNC_CURRENT_INPUT_EXT_POWER_HART 0x9
> +#define CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART 0xA
> +
> +#define CH_FUNC_MIN CH_FUNC_HIGH_IMPEDANCE
> +#define CH_FUNC_MAX CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
> +
> +#endif /* _DT_BINDINGS_ADI_AD74413R_H */

\
 
 \ /
  Last update: 2021-12-04 18:39    [W:0.059 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site