lkml.org 
[lkml]   [2021]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
Date
Hi Chrustophe,

Thanks for your respond.

Best Regards,
Xiantao
> -----Original Message-----
> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> To: Xiantao Hu <xt.hu@cqplus1.com>,
> wim@linux-watchdog.org, p.zabel@pengutronix.de,
> linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
> linux@roeck-us.net, robh+dt@kernel.org,
> devicetree@vger.kernel.org
> Cc: wells.lu@sunplus.com, qinjian@cqplus1.com
> Subject: Re: [PATCH v4 2/2] watchdog: Add watchdog driver for Sunplus SP7021
> Date: Wed, 29 Dec 2021 10:39:08 +0100 [thread overview]
> Message-ID: <0b102fa0-cbfc-a97e-8e7f-cce8146450bc@wanadoo.fr> (raw)
> In-Reply-To: <20211229054308.63168-3-xt.hu@cqplus1.com>
>
>...
>
> > +static int sp_wdt_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct sp_wdt_priv *priv;
> > + int err;
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->clk = devm_clk_get(dev, NULL);
> > + if (IS_ERR(priv->clk)) {
> > + dev_err(dev, "Can't find clock source\n");
> > + return PTR_ERR(priv->clk);
> > + }
> > +
> > + err = clk_prepare_enable(priv->clk);
> > + if (err) {
> > + dev_err(dev, "Clock can't be enabled correctly\n");
> > + return err;
> > + }
> > +
> > + /* The timer and watchdog shared the STC reset */
> > + priv->rstc = devm_reset_control_get_shared(dev, NULL);
> > + if (!IS_ERR(priv->rstc))
> > + reset_control_deassert(priv->rstc);
> > +
> > + err = devm_add_action_or_reset(dev, sp_reset_control_assert,
> > + priv->rstc);
> > + if (err)
> > + return err;
> This looks odd.
> We could undo something that was not done. (if IS_ERR(priv->rstc))
> This is also not really consistent with what is done in suspedn/resume.
> In these functions, we don't check for IS_ERR(priv->rstc).
>

Here I refer to mt7621_wdt.c. I'm sure I need deassert reset to reset
watchdog register value when driver probe. accordingly I assert reset
in devm_add_action_or_reset() to ensure that the registers of watchdog
can't be operated after module remove.

> > +
> > + err = devm_add_action_or_reset(dev, sp_clk_disable_unprepare,
> > + priv->clk);
> > + if (err)
> > + return err;
> Shouldn't this be just after clk_prepare_enable()?

I tested the order of execution of the added functions which is similar to
push and pop. First in, last out. I think I should disable clock last.
\
 
 \ /
  Last update: 2021-12-31 04:21    [W:0.114 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site