lkml.org 
[lkml]   [2021]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5/7] staging: r8188eu: remove unused fields from struct hal_data_8188e
    Date
    Remove unused fields from struct hal_data_8188e.

    Signed-off-by: Michael Straube <straube.linux@gmail.com>
    ---
    .../staging/r8188eu/include/rtl8188e_hal.h | 30 -------------------
    1 file changed, 30 deletions(-)

    diff --git a/drivers/staging/r8188eu/include/rtl8188e_hal.h b/drivers/staging/r8188eu/include/rtl8188e_hal.h
    index 40b3db34b8f2..2ce42d647a34 100644
    --- a/drivers/staging/r8188eu/include/rtl8188e_hal.h
    +++ b/drivers/staging/r8188eu/include/rtl8188e_hal.h
    @@ -175,15 +175,9 @@ struct hal_data_8188e {

    u16 BasicRateSet;

    - /* EEPROM setting. */
    - u16 EEPROMSVID;
    - u16 EEPROMSDID;
    u8 EEPROMRegulatory;
    -
    u8 EEPROMThermalMeter;

    - bool EepromOrEfuse;
    -
    u8 Index24G_CCK_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
    u8 Index24G_BW40_Base[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
    /* If only one tx, only BW20 and OFDM are used. */
    @@ -192,11 +186,6 @@ struct hal_data_8188e {
    s8 BW20_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];
    s8 BW40_24G_Diff[RF_PATH_MAX][MAX_TX_COUNT];

    - u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
    - /* For HT 40MHZ pwr */
    - u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
    - /* For HT 40MHZ pwr */
    - u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
    /* HT 20<->40 Pwr diff */
    u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
    /* For HT<->legacy pwr diff */
    @@ -205,7 +194,6 @@ struct hal_data_8188e {
    u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
    u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];

    - u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */
    /* The current Tx Power Level */
    u8 CurrentCckTxPwrIdx;
    u8 CurrentOfdm24GTxPwrIdx;
    @@ -213,21 +201,12 @@ struct hal_data_8188e {
    u8 CurrentBW4024GTxPwrIdx;

    /* Read/write are allow for following hardware information variables */
    - u8 framesync;
    - u32 framesyncC34;
    - u8 framesyncMonitor;
    - u8 DefaultInitialGain[4];
    u8 pwrGroupCnt;
    u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
    - u32 CCKTxPowerLevelOriginalOffset;

    u8 CrystalCap;
    - u32 AntennaTxPath; /* Antenna path Tx */
    - u32 AntennaRxPath; /* Antenna path Rx */
    u8 ExternalPA;

    - u8 b1x1RecvCombine; /* for 1T1R receive combining */
    -
    u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */

    struct bb_reg_def PHYRegDef[2]; /* Radio A/B */
    @@ -254,17 +233,9 @@ struct hal_data_8188e {
    u8 FwRsvdPageStartOffset; /* Reserve page start offset except
    * beacon in TxQ. */

    - /* 2010/08/09 MH Add CU power down mode. */
    - bool pwrdown;
    -
    u8 OutEpQueueSel;
    u8 OutEpNumber;

    - /* 2010/11/22 MH Add for slim combo debug mode selective. */
    - /* This is used for fix the drawback of CU TSMC-A/UMC-A cut.
    - * HW auto suspend ability. Close BT clock. */
    - bool SlimComboDbg;
    -
    u16 EfuseUsedBytes;

    struct P2P_PS_Offload_t p2p_ps_offload;
    @@ -280,7 +251,6 @@ struct hal_data_8188e {
    u8 C2hArray[16];
    u8 UsbTxAggMode;
    u8 UsbTxAggDescNum;
    - u32 MaxUsbRxAggBlock;

    enum usb_rx_agg_mode UsbRxAggMode;
    u8 UsbRxAggBlockCount; /* USB Block count. Block size is
    --
    2.34.1
    \
     
     \ /
      Last update: 2021-12-30 21:01    [W:3.513 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site