lkml.org 
[lkml]   [2021]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch
Date
On Thu, Dec 30, 2021 at 01:43:28PM +0300, Maxim Kiselev wrote:
> Fix network interface names for the switch ports according to labels
> that are written on the front panel of the board. They start from ETH3
> and end at ETH10.
>
> Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville
> Ethernet switch")

A Fixes: tag should not wrap on multiple lines.

> Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
> ---

Sadly I'm not able to confirm or disprove this change right now, because
my T1040RDB has a bad DDR memory stick, it seems, so it just randomly hangs.
But I'm pretty sure the Ethernet ports were properly mapped out when I
tested them.

Do you have the T1040RDB or the T1040D4RDB? Because the front panel of
my T1040RDB looks like this:

+---------------------------------------------------------------------+
| |
| +-------+-------+ +-------+-------+-------+-------+ |
| | UART0 | ETH1 | | ETH4 | ETH6 | ETH8 | ETH10 | |
| +-------+-------+-------+-------+-------+-------+-------+-------+ |
| | UART1 | ETH0 | ETH2 | ETH3 | ETH5 | ETH7 | ETH9 | ETH11 | |
+--+-------+-------+-------+-------+-------+-------+-------+-------+--+

> arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> index af0c8a6f56138..b6733e7e65805 100644
> --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> @@ -119,7 +119,7 @@ &seville_port0 {
> managed = "in-band-status";
> phy-handle = <&phy_qsgmii_0>;
> phy-mode = "qsgmii";
> - label = "ETH5";
> + label = "ETH3";
> status = "okay";
> };
>
> @@ -135,7 +135,7 @@ &seville_port2 {
> managed = "in-band-status";
> phy-handle = <&phy_qsgmii_2>;
> phy-mode = "qsgmii";
> - label = "ETH7";
> + label = "ETH5";
> status = "okay";
> };
>
> @@ -151,7 +151,7 @@ &seville_port4 {
> managed = "in-band-status";
> phy-handle = <&phy_qsgmii_4>;
> phy-mode = "qsgmii";
> - label = "ETH9";
> + label = "ETH7";
> status = "okay";
> };
>
> @@ -167,7 +167,7 @@ &seville_port6 {
> managed = "in-band-status";
> phy-handle = <&phy_qsgmii_6>;
> phy-mode = "qsgmii";
> - label = "ETH11";
> + label = "ETH9";
> status = "okay";
> };
>
> --
> 2.32.0
>
\
 
 \ /
  Last update: 2021-12-30 14:01    [W:0.059 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site