lkml.org 
[lkml]   [2021]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/8] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
Date
From: Biwen Li <biwen.li@nxp.com>

The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 00d5b81bdef3..baa1cc9b9835 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -276,11 +276,6 @@ temperature-sensor@4c {
vcc-supply = <&sb_3v3>;
};

- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -322,6 +317,15 @@ mux: mux-controller {

};

+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-mode = "rgmii-id";
--
2.25.1
\
 
 \ /
  Last update: 2021-12-04 01:18    [W:0.086 / U:1.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site