lkml.org 
[lkml]   [2021]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 09/14] media: cadence: csi2rx: Add link validation
Hi Pratyush,

Thank you for the patch.

On Fri, Dec 24, 2021 at 12:46:10AM +0530, Pratyush Yadav wrote:
> Add media link validation to make sure incorrectly configured pipelines
> are caught. Since there is no support for transcoding, rely on the
> default link validation function to make sure formats across source and
> sink pads are the same.

I think the commit message is a bit misleading. The default link
validation function ensures that formats on the source and sink sides of
a link match. It doesn't compare the formats on the sink and source pads
of the subdev. Whether the subdev can transcode or not is thus not
relevant here.

> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
>
> ---
>
> Changes in v5:
> - New in v5.
>
> drivers/media/platform/cadence/cdns-csi2rx.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
> index 53659776a906..119c7540c75a 100644
> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
> @@ -492,6 +492,10 @@ static const struct v4l2_subdev_ops csi2rx_subdev_ops = {
> .pad = &csi2rx_pad_ops,
> };
>
> +static struct media_entity_operations csi2rx_media_ops = {

static const

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> static int csi2rx_async_bound(struct v4l2_async_notifier *notifier,
> struct v4l2_subdev *s_subdev,
> struct v4l2_async_subdev *asd)
> @@ -691,6 +695,7 @@ static int csi2rx_probe(struct platform_device *pdev)
> for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++)
> csi2rx->pads[i].flags = MEDIA_PAD_FL_SOURCE;
> csi2rx->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + csi2rx->subdev.entity.ops = &csi2rx_media_ops;
>
> ret = media_entity_pads_init(&csi2rx->subdev.entity, CSI2RX_PAD_MAX,
> csi2rx->pads);

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-12-30 05:48    [W:0.089 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site