lkml.org 
[lkml]   [2021]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 01/13] media: vsp1: Use platform_get_irq() to get the interrupt
Hi Prabhakar,

Thank you for the patch.

On Thu, Dec 23, 2021 at 05:30:02PM +0000, Lad Prabhakar wrote:
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Will you get this merged with the whole series, or should I take it in
my tree ?

> ---
> drivers/media/platform/vsp1/vsp1_drv.c | 13 +++++--------
> 1 file changed, 5 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
> index c9044785b903..bbba91a65a0f 100644
> --- a/drivers/media/platform/vsp1/vsp1_drv.c
> +++ b/drivers/media/platform/vsp1/vsp1_drv.c
> @@ -794,7 +794,6 @@ static int vsp1_probe(struct platform_device *pdev)
> {
> struct vsp1_device *vsp1;
> struct device_node *fcp_node;
> - struct resource *irq;
> unsigned int i;
> int ret;
>
> @@ -813,14 +812,12 @@ static int vsp1_probe(struct platform_device *pdev)
> if (IS_ERR(vsp1->mmio))
> return PTR_ERR(vsp1->mmio);
>
> - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> - if (!irq) {
> - dev_err(&pdev->dev, "missing IRQ\n");
> - return -EINVAL;
> - }
> + ret = platform_get_irq(pdev, 0);
> + if (ret < 0)
> + return ret;

I'd use an int irq local variable, but it doesn't matter much. Up to
you.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>
> - ret = devm_request_irq(&pdev->dev, irq->start, vsp1_irq_handler,
> - IRQF_SHARED, dev_name(&pdev->dev), vsp1);
> + ret = devm_request_irq(&pdev->dev, ret, vsp1_irq_handler,
> + IRQF_SHARED, dev_name(&pdev->dev), vsp1);
> if (ret < 0) {
> dev_err(&pdev->dev, "failed to request IRQ\n");
> return ret;

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-12-30 01:07    [W:2.926 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site