lkml.org 
[lkml]   [2021]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.15 26/26] r8152: sync ocp base
Date
From: Hayes Wang <hayeswang@realtek.com>

[ Upstream commit b24edca309535c2d9af86aab95d64065f6ef1d26 ]

There are some chances that the actual base of hardware is different
from the value recorded by driver, so we have to reset the variable
of ocp_base to sync it.

Set ocp_base to -1. Then, it would be updated and the new base would be
set to the hardware next time.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/usb/r8152.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index d3da350777a4d..6c4c9b7324fcc 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -32,7 +32,7 @@
#define NETNEXT_VERSION "12"

/* Information for net */
-#define NET_VERSION "11"
+#define NET_VERSION "12"

#define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
@@ -4016,6 +4016,11 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)
ocp_write_word(tp, type, PLA_BP_BA, 0);
}

+static inline void rtl_reset_ocp_base(struct r8152 *tp)
+{
+ tp->ocp_base = -1;
+}
+
static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
{
u16 data, check;
@@ -4087,8 +4092,6 @@ static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)

rtl_phy_patch_request(tp, false, wait);

- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
-
return 0;
}

@@ -4800,6 +4803,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
u32 len;
u8 *data;

+ rtl_reset_ocp_base(tp);
+
if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
return;
@@ -4845,7 +4850,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
}
}

- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base);
+ rtl_reset_ocp_base(tp);
+
rtl_phy_patch_request(tp, false, wait);

if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
@@ -4861,6 +4867,8 @@ static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
ver_addr = __le16_to_cpu(phy_ver->ver.addr);
ver = __le16_to_cpu(phy_ver->ver.data);

+ rtl_reset_ocp_base(tp);
+
if (sram_read(tp, ver_addr) >= ver) {
dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
return 0;
@@ -4877,6 +4885,8 @@ static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
{
u16 addr, data;

+ rtl_reset_ocp_base(tp);
+
addr = __le16_to_cpu(fix->setting.addr);
data = ocp_reg_read(tp, addr);

@@ -4908,6 +4918,8 @@ static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *ph
u32 length;
int i, num;

+ rtl_reset_ocp_base(tp);
+
num = phy->pre_num;
for (i = 0; i < num; i++)
sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
@@ -4938,6 +4950,8 @@ static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
u32 length, i, num;
__le16 *data;

+ rtl_reset_ocp_base(tp);
+
mode_reg = __le16_to_cpu(phy->mode_reg);
sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
sram_write(tp, __le16_to_cpu(phy->ba_reg),
@@ -5107,6 +5121,7 @@ static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
if (rtl_fw->post_fw)
rtl_fw->post_fw(tp);

+ rtl_reset_ocp_base(tp);
strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
}
@@ -8467,6 +8482,8 @@ static int rtl8152_resume(struct usb_interface *intf)

mutex_lock(&tp->control);

+ rtl_reset_ocp_base(tp);
+
if (test_bit(SELECTIVE_SUSPEND, &tp->flags))
ret = rtl8152_runtime_resume(tp);
else
@@ -8482,6 +8499,7 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
struct r8152 *tp = usb_get_intfdata(intf);

clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+ rtl_reset_ocp_base(tp);
tp->rtl_ops.init(tp);
queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
set_ethernet_addr(tp, true);
--
2.34.1
\
 
 \ /
  Last update: 2021-12-27 20:05    [W:0.081 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site