lkml.org 
[lkml]   [2021]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 113/128] Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312
Date
From: Johnny Chuang <johnny.chuang.emc@gmail.com>

commit 4ebfee2bbc1a9c343dd50565ba5ae249fac32267 upstream.

The eKTH3900/eKTH5312 series do not support the firmware update rules of
Remark ID. Exclude these two series from checking it when updating the
firmware in touch controllers.

Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com>
Link: https://lore.kernel.org/r/1639619603-20616-1-git-send-email-johnny.chuang.emc@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/touchscreen/elants_i2c.c | 46 ++++++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)

--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -117,6 +117,19 @@
#define ELAN_POWERON_DELAY_USEC 500
#define ELAN_RESET_DELAY_MSEC 20

+/* FW boot code version */
+#define BC_VER_H_BYTE_FOR_EKTH3900x1_I2C 0x72
+#define BC_VER_H_BYTE_FOR_EKTH3900x2_I2C 0x82
+#define BC_VER_H_BYTE_FOR_EKTH3900x3_I2C 0x92
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C 0x6D
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C 0x6E
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C 0x77
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C 0x78
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB 0x67
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB 0x68
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB 0x74
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB 0x75
+
enum elants_chip_id {
EKTH3500,
EKTF3624,
@@ -736,6 +749,37 @@ static int elants_i2c_validate_remark_id
return 0;
}

+static bool elants_i2c_should_check_remark_id(struct elants_data *ts)
+{
+ struct i2c_client *client = ts->client;
+ const u8 bootcode_version = ts->iap_version;
+ bool check;
+
+ /* I2C eKTH3900 and eKTH5312 are NOT support Remark ID */
+ if ((bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x1_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x2_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x3_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB) ||
+ (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB)) {
+ dev_dbg(&client->dev,
+ "eKTH3900/eKTH5312(0x%02x) are not support remark id\n",
+ bootcode_version);
+ check = false;
+ } else if (bootcode_version >= 0x60) {
+ check = true;
+ } else {
+ check = false;
+ }
+
+ return check;
+}
+
static int elants_i2c_do_update_firmware(struct i2c_client *client,
const struct firmware *fw,
bool force)
@@ -749,7 +793,7 @@ static int elants_i2c_do_update_firmware
u16 send_id;
int page, n_fw_pages;
int error;
- bool check_remark_id = ts->iap_version >= 0x60;
+ bool check_remark_id = elants_i2c_should_check_remark_id(ts);

/* Recovery mode detection! */
if (force) {

\
 
 \ /
  Last update: 2021-12-27 16:54    [W:2.025 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site