lkml.org 
[lkml]   [2021]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: display/msm: hdmi: split and convert to yaml
Date
Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.

Other changes:
- fixed reg-names numbering to match 0..3 instead 0,1,3,4

Signed-off-by: David Heidelberg <david@ixit.cz>
---
.../devicetree/bindings/display/msm/hdmi.txt | 99 ---------
.../bindings/display/msm/qcom,hdmi-phy.yaml | 119 +++++++++++
.../bindings/display/msm/qcom,hdmi.yaml | 201 ++++++++++++++++++
3 files changed, 320 insertions(+), 99 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,hdmi-phy.yaml
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
deleted file mode 100644
index 5f90a40da51b..000000000000
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm adreno/snapdragon hdmi output
-
-Required properties:
-- compatible: one of the following
- * "qcom,hdmi-tx-8996"
- * "qcom,hdmi-tx-8994"
- * "qcom,hdmi-tx-8084"
- * "qcom,hdmi-tx-8974"
- * "qcom,hdmi-tx-8660"
- * "qcom,hdmi-tx-8960"
-- reg: Physical base address and length of the controller's registers
-- reg-names: "core_physical"
-- interrupts: The interrupt signal from the hdmi block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
- See ../clocks/clock-bindings.txt for details.
-- core-vdda-supply: phandle to supply regulator
-- hdmi-mux-supply: phandle to mux regulator
-- phys: the phandle for the HDMI PHY device
-- phy-names: the name of the corresponding PHY device
-
-Optional properties:
-- hpd-gpios: hpd pin
-- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
-- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
-- power-domains: reference to the power domain(s), if available.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-1: the "sleep" pinctrl state
-
-HDMI PHY:
-Required properties:
-- compatible: Could be the following
- * "qcom,hdmi-phy-8660"
- * "qcom,hdmi-phy-8960"
- * "qcom,hdmi-phy-8974"
- * "qcom,hdmi-phy-8084"
- * "qcom,hdmi-phy-8996"
-- #phy-cells: Number of cells in a PHY specifier; Should be 0.
-- reg: Physical base address and length of the registers of the PHY sub blocks.
-- reg-names: The names of register regions. The following regions are required:
- * "hdmi_phy"
- * "hdmi_pll"
- For HDMI PHY on msm8996, these additional register regions are required:
- * "hdmi_tx_l0"
- * "hdmi_tx_l1"
- * "hdmi_tx_l3"
- * "hdmi_tx_l4"
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
- See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- core-vdda-supply: phandle to vdda regulator device node
-
-Example:
-
-/ {
- ...
-
- hdmi: hdmi@4a00000 {
- compatible = "qcom,hdmi-tx-8960";
- reg-names = "core_physical";
- reg = <0x04a00000 0x2f0>;
- interrupts = <GIC_SPI 79 0>;
- power-domains = <&mmcc MDSS_GDSC>;
- clock-names =
- "core",
- "master_iface",
- "slave_iface";
- clocks =
- <&mmcc HDMI_APP_CLK>,
- <&mmcc HDMI_M_AHB_CLK>,
- <&mmcc HDMI_S_AHB_CLK>;
- qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
- qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
- qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
- core-vdda-supply = <&pm8921_hdmi_mvs>;
- hdmi-mux-supply = <&ext_3p3v>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&hpd_active &ddc_active &cec_active>;
- pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
-
- phys = <&hdmi_phy>;
- phy-names = "hdmi_phy";
- };
-
- hdmi_phy: phy@4a00400 {
- compatible = "qcom,hdmi-phy-8960";
- reg-names = "hdmi_phy",
- "hdmi_pll";
- reg = <0x4a00400 0x60>,
- <0x4a00500 0x100>;
- #phy-cells = <0>;
- power-domains = <&mmcc MDSS_GDSC>;
- clock-names = "slave_iface";
- clocks = <&mmcc HDMI_S_AHB_CLK>;
- core-vdda-supply = <&pm8921_hdmi_mvs>;
- };
-};
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,hdmi-phy.yaml b/Documentation/devicetree/bindings/display/msm/qcom,hdmi-phy.yaml
new file mode 100644
index 000000000000..be08fc767435
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,hdmi-phy.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: "http://devicetree.org/schemas/display/msm/qcom,hdmi-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Adreno/Snapdragon HDMI phy
+
+maintainers:
+ - Rob Clark <robdclark@gmail.com>
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,hdmi-phy-8996
+ then:
+ properties:
+ reg:
+ minItems: 6
+ maxItems: 6
+
+ reg-names:
+ items:
+ - const: hdmi_pll
+ - const: hdmi_tx_l0
+ - const: hdmi_tx_l1
+ - const: hdmi_tx_l2
+ - const: hdmi_tx_l3
+ - const: hdmi_phy
+
+ else:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: hdmi_phy
+ - const: hdmi_pll
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,hdmi-phy-8960
+ then:
+ properties:
+ clock-names:
+ const: slave_iface
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,hdmi-phy-8996
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: iface
+ - const: ref
+
+properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,hdmi-phy-8084
+ - qcom,hdmi-phy-8660
+ - qcom,hdmi-phy-8960
+ - qcom,hdmi-phy-8974
+ - qcom,hdmi-phy-8994
+ - qcom,hdmi-phy-8996
+
+ reg: true
+
+ reg-names: true
+
+ clocks: true
+
+ clock-names: true
+
+ power-domains:
+ maxItems: 1
+
+ core-vdda-supply: true
+
+ vcca-supply: true
+
+ vddio-supply: true
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - reg-names
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi_phy: phy@4a00400 {
+ compatible = "qcom,hdmi-phy-8960";
+ reg-names = "hdmi_phy",
+ "hdmi_pll";
+ reg = <0x4a00400 0x60>,
+ <0x4a00500 0x100>;
+ #phy-cells = <0>;
+ power-domains = <&mmcc 1>;
+ clock-names = "slave_iface";
+ clocks = <&clk 21>;
+ core-vdda-supply = <&pm8921_hdmi_mvs>;
+ };
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml
new file mode 100644
index 000000000000..72f7a58c078a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: "http://devicetree.org/schemas/display/msm/qcom,hdmi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+ - Rob Clark <robdclark@gmail.com>
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,hdmi-tx-8996
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: core
+ - const: alt_iface
+ - const: extp
+ else:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 5
+
+ clock-names:
+ minItems: 1
+ maxItems: 5
+
+
+properties:
+ compatible:
+ enum:
+ - qcom,hdmi-tx-8996
+ - qcom,hdmi-tx-8994
+ - qcom,hdmi-tx-8084
+ - qcom,hdmi-tx-8974
+ - qcom,hdmi-tx-8660
+ - qcom,hdmi-tx-8960
+
+ clocks: true
+
+ clock-names: true
+
+ reg:
+ minItems: 1
+ maxItems: 3
+ description: Physical base address and length of the controller's registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: core_physical
+ - const: qfprom_physical
+ - const: hdcp_physical
+
+ interrupts:
+ description: The interrupt signal from the hdmi block.
+
+ power-domains:
+ description: should be <&mmcc MDSS_GDSC>
+
+ core-vdda-supply: true
+
+ core-vcc-supply: true
+
+ hdmi-mux-supply:
+ description: phandle to mux regulator
+
+ phys:
+ description: the phandle for the HDMI PHY device
+
+ phy-names:
+ description: the name of the corresponding PHY device
+
+ hpd-gpios:
+ description: hpd pin
+
+ qcom,hdmi-tx-ddc-clk-gpios:
+ description: HDMI DDC clock
+
+ qcom,hdmi-tx-ddc-data-gpios:
+ description: HDMI DDC data
+
+ qcom,hdmi-tx-mux-en-gpios:
+ description: HDMI mux enable pin
+
+ qcom,hdmi-tx-mux-sel-gpios:
+ description: HDMI mux select pin
+
+ qcom,hdmi-tx-mux-lpm-gpios:
+ description: HDMI mux lpm pin
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ anyOf:
+ - items:
+ - const: default
+ - items:
+ - const: default
+ - const: sleep
+
+ '#phy-cells':
+ const: 0
+
+ '#sound-dai-cells':
+ const: 1
+
+ ports:
+ type: object
+ $ref: "/schemas/graph.yaml#/properties/ports"
+ properties:
+ port@0:
+ $ref: "/schemas/graph.yaml#/$defs/port-base"
+ unevaluatedProperties: false
+ description: |
+ Input endpoints of the controller.
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ maxItems: 4
+ minItems: 4
+ items:
+ enum: [0, 1, 2, 3]
+
+ port@1:
+ $ref: "/schemas/graph.yaml#/$defs/port-base"
+ unevaluatedProperties: false
+ description: |
+ Output endpoints of the controller.
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ maxItems: 4
+ minItems: 4
+ items:
+ enum: [0, 1, 2, 3]
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - interrupts
+ - phys
+ - phy-names
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi: hdmi@4a00000 {
+ compatible = "qcom,hdmi-tx-8960";
+ reg-names = "core_physical";
+ reg = <0x04a00000 0x2f0>;
+ interrupts = <0 79 0>;
+ power-domains = <&mmcc 1>;
+ clock-names =
+ "core",
+ "master_iface",
+ "slave_iface";
+ clocks =
+ <&clk 61>,
+ <&clk 72>,
+ <&clk 98>;
+ qcom,hdmi-tx-ddc-clk-gpios = <&msmgpio 70 0>;
+ qcom,hdmi-tx-ddc-data-gpios = <&msmgpio 71 0>;
+ hpd-gpios = <&msmgpio 72 0>;
+ core-vdda-supply = <&pm8921_hdmi_mvs>;
+ hdmi-mux-supply = <&ext_3p3v>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hpd_active &ddc_active &cec_active>;
+ pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi_phy";
+ };
--
2.34.1
\
 
 \ /
  Last update: 2021-12-24 17:26    [W:0.048 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site