lkml.org 
[lkml]   [2021]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] mmc: Add SD/SDIO driver for Sunplus SP7021
Date
Add SD/SDIO driver for Sunplus SP7021.

Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
---
Changes in v3:
- Addressed all comments from Mr. Rob Herring
- Modified SD/SDIO driver.

MAINTAINERS | 6 +
drivers/mmc/host/Kconfig | 12 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sunplus_sd2.c | 1107 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 1126 insertions(+)
create mode 100644 drivers/mmc/host/sunplus_sd2.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 8912b2c..2c1d9e8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18242,6 +18242,12 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/dlink/sundance.c

+SUNPLUS SD/SDIO HOST CONTROLLER INTERFACE DRIVER
+M: Li-hao Kuo <lhjeff911@gmail.com>
+L: linux-mmc@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/sunplus_sd2.c
+
SUPERH
M: Yoshinori Sato <ysato@users.sourceforge.jp>
M: Rich Felker <dalias@libc.org>
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5af8494..612c8af 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -1091,5 +1091,17 @@ config MMC_OWL
This selects support for the SD/MMC Host Controller on
Actions Semi Owl SoCs.

+config MMC_SP_SDV2
+ tristate "Sunplus SP7021 SD/SDIO Controller"
+ depends on SOC_SP7021 || COMPILE_TEST
+ help
+ This selects the Sunplus Host Controller Interface
+ support present in Sunplus SP7021 SoCs. The controller
+ supports SD/SDIO devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_EXTERNAL_DMA
bool
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index ea36d37..167aa5c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_MMC_CQHCI) += cqhci.o
cqhci-y += cqhci-core.o
cqhci-$(CONFIG_MMC_CRYPTO) += cqhci-crypto.o
obj-$(CONFIG_MMC_HSQ) += mmc_hsq.o
+obj-$(CONFIG_MMC_SP_SDV2) += sunplus_sd2.o

ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
diff --git a/drivers/mmc/host/sunplus_sd2.c b/drivers/mmc/host/sunplus_sd2.c
new file mode 100644
index 0000000..85f2b10
--- /dev/null
+++ b/drivers/mmc/host/sunplus_sd2.c
@@ -0,0 +1,1107 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Sunplus Inc.
+ * Author: Li-hao Kuo <lhjeff911@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#define SPSDC_MIN_CLK 400000
+#define SPSDC_MAX_CLK 52000000
+#define SPSDC_50M_CLK 50000000
+#define SPSDC_MAX_BLK_COUNT 65536
+
+#define SPSD2_MEDIA_TYPE_REG 0x0000
+#define SPSDC_MEDIA_MASK GENMASK(2, 0)
+#define SPSDC_MEDIA_NONE 0
+#define SPSDC_MEDIA_SD 6
+#define SPSDC_MEDIA_MS 7
+
+#define SPSD2_SDRAM_SECTOR_SIZE_REG 0x0010
+#define SPSDC_MAX_DMA_MEMORY_SECTORS 8
+
+#define SPSD2_SDRAM_SECTOR_ADDR_REG 0x001C
+#define SPSD2_SD_INT_REG 0x00B0
+#define SPSDC_SDINT_SDCMPEN BIT(0)
+#define SPSDC_SDINT_SDCMP BIT(1)
+#define SPSDC_SDINT_SDCMP_CLR BIT(2)
+#define SPSDC_SDINT_SDIOEN BIT(4)
+#define SPSDC_SDINT_SDIO BIT(5)
+#define SPSDC_SDINT_SDIO_CLR BIT(6)
+
+#define SPSD2_SD_PAGE_NUM_REG 0x00B4
+#define SPSD2_SD_CONF0_REG 0x00B8
+#define SPSDC_CONF0_SDPIO_MODE BIT(0)
+#define SPSDC_CONF0_SDLEN_MODE BIT(2)
+#define SPSDC_CONF0_TRANS_MODE GENMASK(5, 4)
+#define SPSDC_TRANS_CMD_MODE 0
+#define SPSDC_TRANS_WR_MODE 1
+#define SPSDC_TRANS_RD_MODE 2
+#define SPSDC_CONF0_AUTORSP BIT(6)
+#define SPSDC_CONF0_CMDDUMMY BIT(7)
+#define SPSDC_CONF0_RSPCHK BIT(8)
+
+#define SPSD2_SDIO_CTRL_REG 0x00BC
+#define SPSDC_SDIO_CTRL_MULTI_TRIG BIT(6)
+
+#define SPSD2_SD_RST_REG 0x00C0
+#define SPSDC_RST_ALL 0x07
+
+#define SPSD2_SD_CONF_REG 0x00C4
+#define SPSDC_CONF_CLK_DIV GENMASK(11, 0)
+#define SPSDC_CONF_4BIT_MODE BIT(12)
+#define SPSDC_CONF_SDRSP_TYPE BIT(13)
+#define SPSDC_CONF_SD_MODE BIT(16)
+#define SPSDC_CONF_MMC8BIT BIT(18)
+#define SPSDC_CONF_SDIO_MODE BIT(20)
+#define SPSDC_MODE_SDIO 2
+#define SPSDC_MODE_EMMC 1
+#define SPSDC_MODE_SD 0
+
+#define SPSD2_SD_CTRL_REG 0x00C8
+#define SPSDC_CTRL_CMD_TRIG BIT(0)
+#define SPSDC_CTRL_TXDUMMY_TRIG BIT(1)
+
+#define SPSD2_SD_STATUS_REG 0x00CC
+#define SPSDC_STS_DUMMY_RDY BIT(0)
+#define SPSDC_STS_RSP_BUF_FULL BIT(1)
+#define SPSDC_STS_TX_BUF_EMP BIT(2)
+#define SPSDC_STS_RX_BUF_FULL BIT(3)
+#define SPSDC_STS_CMD_PIN_STS BIT(4)
+#define SPSDC_STS_DAT0_PIN_STS BIT(5)
+#define SPSDC_STS_RSP_TIMEOUT BIT(6)
+#define SPSDC_STS_CARD_CRC_TIMEOUT BIT(7)
+#define SPSDC_STS_STB_TIMEOUT BIT(8)
+#define SPSDC_STS_RSP_CRC7_ERR BIT(9)
+#define SPSDC_STS_CRC_TOKEN_ERR BIT(10)
+#define SPSDC_STS_RDATA_CRC16_ERR BIT(11)
+#define SPSDC_STS_SUSPEND_STATE_RDY BIT(12)
+#define SPSDC_STS_BUSY_CYCLE BIT(13)
+
+#define SPSD2_SD_STATE_REG 0x00D0
+#define SPSDC_STATE_IDLE (0x0)
+#define SPSDC_STATE_TXDUMMY (0x1)
+#define SPSDC_STATE_TXCMD (0x2)
+#define SPSDC_STATE_RXRSP (0x3)
+#define SPSDC_STATE_TXDATA (0x4)
+#define SPSDC_STATE_RXCRC (0x5)
+#define SPSDC_STATE_RXDATA (0x6)
+#define SPSDC_STATE_MASK (0x7)
+#define SPSDC_STATE_ERROR BIT(13)
+#define SPSDC_STATE_FINISH BIT(14)
+
+#define SPSD2_BLOCKSIZE_REG 0x00D4
+#define SPSD2_SD_TIMING_CONF0_REG 0x00DC
+#define SPSDC_TIMING_CONF0_HS_EN BIT(11)
+#define SPSDC_TIMING_CONF0_WRTD GENMASK(14, 12)
+
+#define SPSD2_SD_TIMING_CONF1_REG 0x00E0
+#define SPSDC_TIMING_CONF1_RDTD GENMASK(15, 13)
+
+#define SPSD2_SD_PIO_TX_REG 0x00E4
+#define SPSD2_SD_PIO_RX_REG 0x00E8
+#define SPSD2_SD_CMD_BUF0_REG 0x00EC
+#define SPSD2_SD_CMD_BUF1_REG 0x00F0
+#define SPSD2_SD_CMD_BUF2_REG 0x00F4
+#define SPSD2_SD_CMD_BUF3_REG 0x00F8
+#define SPSD2_SD_CMD_BUF4_REG 0x00FC
+#define SPSD2_SD_RSP_BUF0_3_REG 0x0100
+#define SPSD2_SD_RSP_BUF4_5_REG 0x0104
+#define SPSD2_DMA_SRCDST_REG 0x0204
+#define SPSD2_DMA_SIZE_REG 0x0208
+#define SPSD2_DMA_STOP_RST_REG 0x020c
+#define SPSD2_DMA_CTRL_REG 0x0210
+#define SPSD2_DMA_BASE_ADDR0_REG 0x0214
+#define SPSD2_DMA_BASE_ADDR16_REG 0x0218
+
+struct spsdc_tuning_info {
+ int need_tuning;
+#define SPSDC_MAX_RETRIES (8 * 8)
+ int retried; /* how many times has been retried */
+ u32 wr_dly:3;
+ u32 rd_dly:3;
+ u32 clk_dly:3;
+};
+
+enum {
+ SPSDC_DMA_MODE = 0,
+ SPSDC_PIO_MODE = 1,
+};
+
+struct spsdc_host {
+ void __iomem *base;
+ struct clk *clk;
+ struct reset_control *rstc;
+ int mode; /* SD/SDIO/eMMC */
+ spinlock_t lock; /* controller lock */
+ struct mutex mrq_lock;
+ /* tasklet used to handle error then finish the request */
+ struct tasklet_struct tsklet_finish_req;
+ struct mmc_host *mmc;
+ struct mmc_request *mrq; /* current mrq */
+ int irq;
+ int use_int; /* should raise irq when done */
+ int power_state; /* current power state: off/up/on */
+ int restore_4bit_sdio_bus;
+ int dmapio_mode;
+ /* for purpose of reducing context switch, only when transfer data that
+ * length is greater than `dma_int_threshold' should use interrupt
+ */
+ int dma_int_threshold;
+ int dma_use_int; /* should raise irq when dma done */
+ struct sg_mapping_iter sg_miter; /* for pio mode to access sglist */
+ struct spsdc_tuning_info tuning_info;
+};
+
+/**
+ * wait for transaction done, return -1 if error.
+ */
+static inline int spsdc_wait_finish(struct spsdc_host *host)
+{
+ /* Wait for transaction finish */
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+
+ while (!time_after(jiffies, timeout)) {
+ if (readl(host->base + SPSD2_SD_STATE_REG) & SPSDC_STATE_FINISH)
+ return 0;
+ if (readl(host->base + SPSD2_SD_STATE_REG) & SPSDC_STATE_ERROR)
+ return -1;
+ }
+ return -1;
+}
+
+static inline int spsdc_wait_sdstatus(struct spsdc_host *host, unsigned int status_bit)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+
+ while (!time_after(jiffies, timeout)) {
+ if (readl(host->base + SPSD2_SD_STATUS_REG) & status_bit)
+ return 0;
+ if (readl(host->base + SPSD2_SD_STATE_REG) & SPSDC_STATE_ERROR)
+ return -1;
+ }
+ return -1;
+}
+
+#define spsdc_wait_rspbuf_full(host) spsdc_wait_sdstatus(host, SPSDC_STS_RSP_BUF_FULL)
+#define spsdc_wait_rxbuf_full(host) spsdc_wait_sdstatus(host, SPSDC_STS_RX_BUF_FULL)
+#define spsdc_wait_txbuf_empty(host) spsdc_wait_sdstatus(host, SPSDC_STS_TX_BUF_EMP)
+
+static void spsdc_get_rsp(struct spsdc_host *host, struct mmc_command *cmd)
+{
+ u32 value0_3, value4_5;
+
+ if (unlikely(!(cmd->flags & MMC_RSP_PRESENT)))
+ return;
+ if (unlikely(cmd->flags & MMC_RSP_136)) {
+ if (spsdc_wait_rspbuf_full(host))
+ return;
+ value0_3 = readl(host->base + SPSD2_SD_RSP_BUF0_3_REG);
+ value4_5 = readl(host->base + SPSD2_SD_RSP_BUF4_5_REG) & 0xffff;
+ cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8);
+ cmd->resp[1] = value4_5 << 24;
+ if (spsdc_wait_rspbuf_full(host))
+ return;
+ value0_3 = readl(host->base + SPSD2_SD_RSP_BUF0_3_REG);
+ value4_5 = readl(host->base + SPSD2_SD_RSP_BUF4_5_REG) & 0xffff;
+ cmd->resp[1] |= value0_3 >> 8;
+ cmd->resp[2] = value0_3 << 24;
+ cmd->resp[2] |= value4_5 << 8;
+ if (spsdc_wait_rspbuf_full(host))
+ return;
+ value0_3 = readl(host->base + SPSD2_SD_RSP_BUF0_3_REG);
+ value4_5 = readl(host->base + SPSD2_SD_RSP_BUF4_5_REG) & 0xffff;
+ cmd->resp[2] |= value0_3 >> 24;
+ cmd->resp[3] = value0_3 << 8;
+ cmd->resp[3] |= value4_5 >> 8;
+ } else {
+ if (spsdc_wait_rspbuf_full(host))
+ return;
+ value0_3 = readl(host->base + SPSD2_SD_RSP_BUF0_3_REG);
+ value4_5 = readl(host->base + SPSD2_SD_RSP_BUF4_5_REG) & 0xffff;
+ cmd->resp[0] = (value0_3 << 8) | (value4_5 >> 8);
+ cmd->resp[1] = value4_5 << 24;
+ }
+}
+
+static void spsdc_set_bus_clk(struct spsdc_host *host, int clk)
+{
+ unsigned int clkdiv;
+ int f_min = host->mmc->f_min;
+ int f_max = host->mmc->f_max;
+ u32 value = readl(host->base + SPSD2_SD_CONF_REG);
+
+ if (clk < f_min)
+ clk = f_min;
+ if (clk > f_max)
+ clk = f_max;
+
+ // SD 2.0 only max set to 50Mhz CLK
+ if (clk >= SPSDC_50M_CLK)
+ clk = f_max;
+
+ clkdiv = (clk_get_rate(host->clk) + clk) / clk - 1;
+ if (clkdiv > 0xfff)
+ clkdiv = 0xfff;
+
+ value &= ~SPSDC_CONF_CLK_DIV;
+ value |= FIELD_PREP(SPSDC_CONF_CLK_DIV, clkdiv);
+ writel(value, host->base + SPSD2_SD_CONF_REG);
+ /* In order to reduce the frequency of context switch,
+ * if it is high speed or upper, we do not use interrupt
+ * when send a command that without data.
+ */
+ if (clk > 25000000)
+ host->use_int = 0;
+ else
+ host->use_int = 1;
+}
+
+static void spsdc_set_bus_timing(struct spsdc_host *host, unsigned int timing)
+{
+ u32 value = readl(host->base + SPSD2_SD_TIMING_CONF0_REG);
+ int clkdiv = FIELD_GET(SPSDC_CONF_CLK_DIV, readl(host->base + SPSD2_SD_CONF_REG));
+ int delay = (clkdiv / 2 < 7) ? clkdiv / 2 : 7;
+ char *timing_name;
+
+ switch (timing) {
+ case MMC_TIMING_LEGACY:
+ value &= ~SPSDC_TIMING_CONF0_HS_EN;
+ timing_name = "legacy";
+ break;
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_MMC_HS:
+ value |= SPSDC_TIMING_CONF0_HS_EN |
+ FIELD_PREP(SPSDC_TIMING_CONF0_WRTD, delay);
+ timing_name = "hs";
+ break;
+ }
+ writel(value, host->base + SPSD2_SD_TIMING_CONF0_REG);
+}
+
+static void spsdc_set_bus_width(struct spsdc_host *host, int width)
+{
+ u32 value = readl(host->base + SPSD2_SD_CONF_REG);
+ int bus_width;
+
+ switch (width) {
+ case MMC_BUS_WIDTH_8:
+ value &= ~SPSDC_CONF_4BIT_MODE;
+ value |= SPSDC_CONF_MMC8BIT;
+ bus_width = 8;
+ break;
+ case MMC_BUS_WIDTH_4:
+ value |= SPSDC_CONF_4BIT_MODE;
+ value &= ~SPSDC_CONF_MMC8BIT;
+ bus_width = 4;
+ break;
+ default:
+ value &= ~SPSDC_CONF_4BIT_MODE;
+ value &= ~SPSDC_CONF_MMC8BIT;
+ bus_width = 1;
+ break;
+ };
+ writel(value, host->base + SPSD2_SD_CONF_REG);
+}
+
+/**
+ * select the working mode of controller: sd/sdio/emmc
+ */
+static void spsdc_select_mode(struct spsdc_host *host, int mode)
+{
+ u32 value = readl(host->base + SPSD2_SD_CONF_REG);
+
+ host->mode = mode;
+ /* set `sdmmcmode', as it will sample data at fall edge
+ * of SD bus clock if `sdmmcmode' is not set when
+ * `sd_high_speed_en' is not set, which is not compliant
+ * with SD specification
+ */
+ value |= SPSDC_CONF_SD_MODE;
+ switch (mode) {
+ case SPSDC_MODE_EMMC:
+ value &= ~SPSDC_CONF_SDIO_MODE;
+ writel(value, host->base + SPSD2_SD_CONF_REG);
+ break;
+ case SPSDC_MODE_SDIO:
+ value |= SPSDC_CONF_SDIO_MODE;
+ writel(value, host->base + SPSD2_SD_CONF_REG);
+ value = readl(host->base + SPSD2_SDIO_CTRL_REG);
+ value |= SPSDC_SDIO_CTRL_MULTI_TRIG;
+ writel(value, host->base + SPSD2_SDIO_CTRL_REG);
+ break;
+ case SPSDC_MODE_SD:
+ default:
+ value &= ~SPSDC_CONF_SDIO_MODE;
+ host->mode = SPSDC_MODE_SD;
+ writel(value, host->base + SPSD2_SD_CONF_REG);
+ break;
+ }
+}
+
+static void spsdc_sw_reset(struct spsdc_host *host)
+{
+ writel(SPSDC_RST_ALL, host->base + SPSD2_SD_RST_REG);
+ writel(0x6, host->base + SPSD2_DMA_STOP_RST_REG);
+ while (readl(host->base + SPSD2_DMA_STOP_RST_REG) & BIT(2))
+ ;
+ /* reset dma operation */
+ writel(0x0, host->base + SPSD2_DMA_CTRL_REG);
+ writel(0x1, host->base + SPSD2_DMA_CTRL_REG);
+ writel(0x0, host->base + SPSD2_DMA_CTRL_REG);
+}
+
+static void spsdc_prepare_cmd(struct spsdc_host *host, struct mmc_command *cmd)
+{
+ u32 value;
+
+ writeb((u8)(cmd->opcode | 0x40), host->base + SPSD2_SD_CMD_BUF0_REG);
+ writeb((u8)((cmd->arg >> 24) & 0x000000ff), host->base + SPSD2_SD_CMD_BUF1_REG);
+ writeb((u8)((cmd->arg >> 16) & 0x000000ff), host->base + SPSD2_SD_CMD_BUF2_REG);
+ writeb((u8)((cmd->arg >> 8) & 0x000000ff), host->base + SPSD2_SD_CMD_BUF3_REG);
+ writeb((u8)((cmd->arg >> 0) & 0x000000ff), host->base + SPSD2_SD_CMD_BUF4_REG);
+
+ /* disable interrupt if needed */
+ value = readl(host->base + SPSD2_SD_INT_REG);
+ value |= SPSDC_SDINT_SDCMP_CLR;
+ if (likely(!host->use_int || cmd->flags & MMC_RSP_136))
+ value &= ~SPSDC_SDINT_SDCMPEN;
+ else
+ value |= SPSDC_SDINT_SDCMPEN;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+
+ value = readl(host->base + SPSD2_SD_CONF0_REG);
+ value &= ~SPSDC_CONF0_TRANS_MODE; /* sd_trans_mode = 0 cmd mode */
+ value |= SPSDC_CONF0_CMDDUMMY;
+ if (likely(cmd->flags & MMC_RSP_PRESENT)) {
+ value |= SPSDC_CONF0_AUTORSP;
+ } else {
+ value &= ~SPSDC_CONF0_AUTORSP;
+ writel(value, host->base + SPSD2_SD_CONF0_REG);
+ return;
+ }
+ /*
+ * Currently, host is not capable of checking R2's CRC7,
+ * thus, enable crc7 check only for 48 bit response commands
+ */
+ if (likely(cmd->flags & MMC_RSP_CRC && !(cmd->flags & MMC_RSP_136)))
+ value |= SPSDC_CONF0_RSPCHK;
+ else
+ value &= ~SPSDC_CONF0_RSPCHK;
+
+ writel(value, host->base + SPSD2_SD_CONF0_REG);
+ value = readl(host->base + SPSD2_SD_CONF_REG);
+ if (unlikely(cmd->flags & MMC_RSP_136))
+ value |= SPSDC_CONF_SDRSP_TYPE;
+ else
+ value &= ~SPSDC_CONF_SDRSP_TYPE;
+ writel(value, host->base + SPSD2_SD_CONF_REG);
+}
+
+static void spsdc_prepare_data(struct spsdc_host *host, struct mmc_data *data)
+{
+ u32 value;
+
+ writel(data->blocks - 1, host->base + SPSD2_SD_PAGE_NUM_REG);
+ writel(data->blksz - 1, host->base + SPSD2_BLOCKSIZE_REG);
+ value = readl(host->base + SPSD2_SD_CONF0_REG);
+ value &= ~SPSDC_CONF0_TRANS_MODE;
+ if (data->flags & MMC_DATA_READ) {
+ value &= ~(SPSDC_CONF0_AUTORSP | SPSDC_CONF0_CMDDUMMY);
+ value |= FIELD_PREP(SPSDC_CONF0_TRANS_MODE, SPSDC_TRANS_RD_MODE);
+ writel(0x12, host->base + SPSD2_DMA_SRCDST_REG);
+ } else {
+ value |= FIELD_PREP(SPSDC_CONF0_TRANS_MODE, SPSDC_TRANS_WR_MODE);
+ writel(0x21, host->base + SPSD2_DMA_SRCDST_REG);
+ }
+ /* to prevent of the responses of CMD18/25 being by CMD12's,
+ * send CMD12 by ourself instead of by controller automatically
+ *
+ * #if 0
+ * if ((cmd->opcode == MMC_READ_MULTIPLE_BLOCK)
+ * || (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK))
+ * value = bitfield_replace(value, 2, 1, 0); //sd_len_mode
+ * else
+ * value = bitfield_replace(value, 2, 1, 1);
+ * #endif
+ */
+ value |= SPSDC_CONF0_SDLEN_MODE;
+ if (likely(host->dmapio_mode == SPSDC_DMA_MODE)) {
+ struct scatterlist *sg;
+ dma_addr_t dma_addr;
+ unsigned int dma_size;
+ void __iomem *reg_addr;
+ int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ int i, count = dma_map_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction);
+
+ if (unlikely(!count || count > SPSDC_MAX_DMA_MEMORY_SECTORS)) {
+ data->error = -EINVAL;
+ return;
+ }
+ for_each_sg(data->sg, sg, count, i) {
+ dma_addr = sg_dma_address(sg);
+ dma_size = sg_dma_len(sg) / data->blksz - 1;
+ //dma_size = sg_dma_len(sg) / 512 - 1;
+ if (i == 0) {
+ writel(dma_addr, host->base + SPSD2_DMA_BASE_ADDR0_REG);
+ writel(dma_addr >> 16, host->base + SPSD2_DMA_BASE_ADDR16_REG);
+ writel(dma_size, host->base + SPSD2_SDRAM_SECTOR_SIZE_REG);
+ } else {
+ reg_addr = host->base + (SPSD2_SDRAM_SECTOR_ADDR_REG + (i - 1) * 8);
+ writel(dma_addr, reg_addr);
+ writel(dma_size, reg_addr + 4);
+ }
+ }
+ value &= ~SPSDC_CONF0_SDPIO_MODE;
+ writel(value, host->base + SPSD2_SD_CONF0_REG);
+ writel(data->blksz - 1, host->base + SPSD2_DMA_SIZE_REG);
+ /* enable interrupt if needed */
+ if (!host->use_int && data->blksz * data->blocks > host->dma_int_threshold) {
+ host->dma_use_int = 1;
+ value = readl(host->base + SPSD2_SD_INT_REG);
+ value |= SPSDC_SDINT_SDCMPEN;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+ }
+ } else {
+ value |= SPSDC_CONF0_SDPIO_MODE;
+ writel(value, host->base + SPSD2_SD_CONF0_REG);
+ }
+}
+
+static inline void spsdc_trigger_transaction(struct spsdc_host *host)
+{
+ u32 value = readl(host->base + SPSD2_SD_CTRL_REG);
+
+ value |= SPSDC_CTRL_CMD_TRIG;
+ writel(value, host->base + SPSD2_SD_CTRL_REG);
+}
+
+static int __send_stop_cmd(struct spsdc_host *host, struct mmc_command *stop)
+{
+ u32 value;
+
+ spsdc_prepare_cmd(host, stop);
+ value = readl(host->base + SPSD2_SD_INT_REG);
+ value &= ~SPSDC_SDINT_SDCMPEN;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+ spsdc_trigger_transaction(host);
+ if (spsdc_wait_finish(host)) {
+ value = readl(host->base + SPSD2_SD_STATUS_REG);
+ if (value & SPSDC_STS_RSP_CRC7_ERR)
+ stop->error = -EILSEQ;
+ else
+ stop->error = -ETIMEDOUT;
+ return -1;
+ }
+ spsdc_get_rsp(host, stop);
+ return 0;
+}
+
+static int __switch_sdio_bus_width(struct spsdc_host *host, int width)
+{
+ struct mmc_command cmd = {0};
+ int ret = 0;
+ u32 value;
+ u8 ctrl;
+
+ cmd.opcode = SD_IO_RW_DIRECT;
+ cmd.arg |= SDIO_CCCR_IF << 9;
+ cmd.flags = MMC_RSP_R5;
+ spsdc_prepare_cmd(host, &cmd);
+ value = readl(host->base + SPSD2_SD_INT_REG);
+ value &= ~SPSDC_SDINT_SDCMPEN;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+ spsdc_trigger_transaction(host);
+ ret = spsdc_wait_finish(host);
+ if (ret) {
+ spsdc_sw_reset(host);
+ return ret;
+ }
+ spsdc_get_rsp(host, &cmd);
+ ctrl = cmd.resp[0] & 0xff;
+
+ ctrl &= ~SDIO_BUS_WIDTH_MASK;
+ if (width == MMC_BUS_WIDTH_4) {
+ /* set to 4-bit bus width */
+ ctrl |= SDIO_BUS_WIDTH_4BIT;
+ }
+
+ cmd.arg |= 0x80000000;
+ cmd.arg |= ctrl;
+ spsdc_prepare_cmd(host, &cmd);
+ value = readl(host->base + SPSD2_SD_INT_REG);
+ value |= ~SPSDC_SDINT_SDCMPEN;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+ spsdc_trigger_transaction(host);
+ ret = spsdc_wait_finish(host);
+ if (ret) {
+ spsdc_sw_reset(host);
+ return ret;
+ }
+ spsdc_get_rsp(host, &cmd);
+ spsdc_set_bus_width(host, width);
+
+ return ret;
+}
+
+/**
+ * check if error during transaction.
+ * @host - host
+ * @mrq - the mrq
+ * @return 0 if no error otherwise the error number.
+ */
+static int spsdc_check_error(struct spsdc_host *host, struct mmc_request *mrq)
+{
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ int ret = 0;
+ u32 value = readl(host->base + SPSD2_SD_STATE_REG);
+
+ if (unlikely(value & SPSDC_STATE_ERROR)) {
+ u32 timing_cfg0, timing_cfg1;
+
+ value = readl(host->base + SPSD2_SD_STATUS_REG);
+ timing_cfg0 = readl(host->base + SPSD2_SD_TIMING_CONF0_REG);
+ host->tuning_info.wr_dly = FIELD_GET(SPSDC_TIMING_CONF0_WRTD, timing_cfg0);
+ timing_cfg1 = readl(host->base + SPSD2_SD_TIMING_CONF1_REG);
+ host->tuning_info.rd_dly = FIELD_GET(SPSDC_TIMING_CONF1_RDTD, timing_cfg1);
+ if (value & SPSDC_STS_RSP_TIMEOUT) {
+ ret = -ETIMEDOUT;
+ host->tuning_info.wr_dly++;
+ } else if (value & SPSDC_STS_RSP_CRC7_ERR) {
+ ret = -EILSEQ;
+ host->tuning_info.rd_dly++;
+ }
+ if (data) {
+ if ((value & SPSDC_STS_STB_TIMEOUT) ||
+ (value & SPSDC_STS_CARD_CRC_TIMEOUT)) {
+ ret = -ETIMEDOUT;
+ host->tuning_info.rd_dly++;
+ } else if (value & SPSDC_STS_CRC_TOKEN_ERR) {
+ ret = -EILSEQ;
+ host->tuning_info.wr_dly++;
+ } else if (value & SPSDC_STS_RDATA_CRC16_ERR) {
+ ret = -EILSEQ;
+ host->tuning_info.rd_dly++;
+ }
+ data->error = ret;
+ data->bytes_xfered = 0;
+ }
+ cmd->error = ret;
+ if (!host->tuning_info.need_tuning)
+ cmd->retries = SPSDC_MAX_RETRIES; /* retry it */
+ spsdc_sw_reset(host);
+ timing_cfg0 |= FIELD_PREP(SPSDC_TIMING_CONF0_WRTD, host->tuning_info.wr_dly);
+ writel(timing_cfg0, host->base + SPSD2_SD_TIMING_CONF0_REG);
+ timing_cfg1 |= FIELD_PREP(SPSDC_TIMING_CONF1_RDTD, host->tuning_info.rd_dly);
+ writel(timing_cfg1, host->base + SPSD2_SD_TIMING_CONF1_REG);
+
+ } else if (data) {
+ data->bytes_xfered = data->blocks * data->blksz;
+ }
+ host->tuning_info.need_tuning = ret;
+ return ret;
+}
+
+static inline __maybe_unused void spsdc_txdummy(struct spsdc_host *host)
+{
+ u32 value = readl(host->base + SPSD2_SD_CTRL_REG);
+
+ value |= SPSDC_CTRL_TXDUMMY_TRIG;
+ writel(value, host->base + SPSD2_SD_CTRL_REG);
+}
+
+static void spsdc_xfer_data_pio(struct spsdc_host *host, struct mmc_data *data)
+{
+ int data_left = data->blocks * data->blksz;
+ int consumed, remain;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ unsigned int flags = 0;
+ u16 *buf; /* tx/rx 2 bytes one time in pio mode */
+
+ if (data->flags & MMC_DATA_WRITE)
+ flags |= SG_MITER_FROM_SG;
+ else
+ flags |= SG_MITER_TO_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ while (data_left > 0) {
+ consumed = 0;
+ if (!sg_miter_next(sg_miter))
+ break;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ do {
+ if (data->flags & MMC_DATA_WRITE) {
+ if (spsdc_wait_txbuf_empty(host))
+ goto done;
+ writel(*buf, host->base + SPSD2_SD_PIO_TX_REG);
+ } else {
+ if (spsdc_wait_rxbuf_full(host))
+ goto done;
+ *buf = readl(host->base + SPSD2_SD_PIO_RX_REG);
+ }
+ buf++;
+ consumed += 2;
+ remain -= 2;
+ } while (remain);
+ sg_miter->consumed = consumed;
+ data_left -= consumed;
+ }
+done:
+ sg_miter_stop(sg_miter);
+}
+
+static void spsdc_controller_init(struct spsdc_host *host)
+{
+ u32 value;
+ int ret = reset_control_assert(host->rstc);
+
+ if (!ret) {
+ usleep_range(1000, 1250);
+ ret = reset_control_deassert(host->rstc);
+ }
+ value = readl(host->base + SPSD2_MEDIA_TYPE_REG);
+ value &= ~SPSDC_MEDIA_MASK;
+ value |= FIELD_PREP(SPSDC_MEDIA_MASK, SPSDC_MEDIA_SD);
+ writel(value, host->base + SPSD2_MEDIA_TYPE_REG);
+}
+
+static void spsdc_set_power_mode(struct spsdc_host *host, struct mmc_ios *ios)
+{
+ if (host->power_state == ios->power_mode)
+ return;
+
+ switch (ios->power_mode) {
+ /* power off->up->on */
+ case MMC_POWER_ON:
+ spsdc_controller_init(host);
+ pm_runtime_get_sync(host->mmc->parent);
+ break;
+ case MMC_POWER_UP:
+ break;
+ case MMC_POWER_OFF:
+ pm_runtime_put(host->mmc->parent);
+ break;
+ }
+ host->power_state = ios->power_mode;
+}
+
+/**
+ * 1. unmap scatterlist if needed;
+ * 2. get response & check error conditions;
+ * 3. unlock host->mrq_lock
+ * 4. notify mmc layer the request is done
+ */
+static void spsdc_finish_request(struct spsdc_host *host, struct mmc_request *mrq)
+{
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ if (!mrq)
+ return;
+
+ cmd = mrq->cmd;
+ data = mrq->data;
+ if (data && SPSDC_DMA_MODE == host->dmapio_mode) {
+ int dma_direction = data->flags & MMC_DATA_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ dma_unmap_sg(host->mmc->parent, data->sg, data->sg_len, dma_direction);
+ host->dma_use_int = 0;
+ }
+ spsdc_get_rsp(host, cmd);
+ spsdc_check_error(host, mrq);
+ if (mrq->stop) {
+ if (__send_stop_cmd(host, mrq->stop))
+ spsdc_sw_reset(host);
+ }
+ host->mrq = NULL;
+
+ if (host->restore_4bit_sdio_bus) {
+ __switch_sdio_bus_width(host, MMC_BUS_WIDTH_4);
+ host->restore_4bit_sdio_bus = 0;
+ }
+ mutex_unlock(&host->mrq_lock);
+ mmc_request_done(host->mmc, mrq);
+}
+
+/* Interrupt Service Routine */
+irqreturn_t spsdc_irq(int irq, void *dev_id)
+{
+ struct spsdc_host *host = dev_id;
+ u32 value = readl(host->base + SPSD2_SD_INT_REG);
+
+ spin_lock(&host->lock);
+ if ((value & SPSDC_SDINT_SDCMP) && (value & SPSDC_SDINT_SDCMPEN)) {
+ value &= ~SPSDC_SDINT_SDCMP;
+ value |= SPSDC_SDINT_SDCMP_CLR;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+ /* we may need send stop command to stop data transaction,
+ * which is time consuming, so make use of tasklet to handle this.
+ */
+ if (host->mrq && host->mrq->stop)
+ tasklet_schedule(&host->tsklet_finish_req);
+ else
+ spsdc_finish_request(host, host->mrq);
+ }
+
+ if ((value & SPSDC_SDINT_SDIO) && (value & SPSDC_SDINT_SDIOEN))
+ mmc_signal_sdio_irq(host->mmc);
+ spin_unlock(&host->lock);
+ return IRQ_HANDLED;
+}
+
+static void spsdc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct spsdc_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ int bus_width = mmc->ios.bus_width;
+
+ mutex_lock_interruptible(&host->mrq_lock);
+ host->mrq = mrq;
+ data = mrq->data;
+ cmd = mrq->cmd;
+
+ if (cmd->opcode == SD_IO_RW_EXTENDED && bus_width ==
+ MMC_BUS_WIDTH_4 && data->blocks * data->blksz <= 4) {
+ if (__switch_sdio_bus_width(host, MMC_BUS_WIDTH_1)) {
+ cmd->error = -1;
+ host->mrq = NULL;
+ mutex_unlock(&host->mrq_lock);
+ mmc_request_done(host->mmc, mrq);
+ return;
+ }
+ host->restore_4bit_sdio_bus = 1;
+ }
+
+ spsdc_prepare_cmd(host, cmd);
+ /* we need manually read response R2. */
+ if (unlikely(cmd->flags & MMC_RSP_136)) {
+ spsdc_trigger_transaction(host);
+ spsdc_get_rsp(host, cmd);
+ spsdc_wait_finish(host);
+ spsdc_check_error(host, mrq);
+ host->mrq = NULL;
+ mutex_unlock(&host->mrq_lock);
+ mmc_request_done(host->mmc, mrq);
+ } else {
+ if (data)
+ spsdc_prepare_data(host, data);
+
+ if ((host->dmapio_mode && data) == SPSDC_PIO_MODE) {
+ u32 value;
+ /* pio data transfer do not use interrupt */
+ value = readl(host->base + SPSD2_SD_INT_REG);
+ value &= ~SPSDC_SDINT_SDCMPEN;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+ spsdc_trigger_transaction(host);
+ spsdc_xfer_data_pio(host, data);
+ spsdc_wait_finish(host);
+ spsdc_finish_request(host, mrq);
+ } else {
+ if (!(host->use_int || host->dma_use_int)) {
+ spsdc_trigger_transaction(host);
+ spsdc_wait_finish(host);
+ spsdc_finish_request(host, mrq);
+ } else {
+ spsdc_trigger_transaction(host);
+ }
+ }
+ }
+}
+
+static void spsdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct spsdc_host *host = (struct spsdc_host *)mmc_priv(mmc);
+
+ mutex_lock(&host->mrq_lock);
+ spsdc_set_power_mode(host, ios);
+ spsdc_set_bus_clk(host, ios->clock);
+ spsdc_set_bus_timing(host, ios->timing);
+ spsdc_set_bus_width(host, ios->bus_width);
+ /* ensure mode is correct, because we might have hw reset the controller */
+ spsdc_select_mode(host, host->mode);
+ mutex_unlock(&host->mrq_lock);
+}
+
+/**
+ * Return values for the get_cd callback should be:
+ * 0 for a absent card
+ * 1 for a present card
+ * -ENOSYS when not supported (equal to NULL callback)
+ * or a negative errno value when something bad happened
+ */
+int spsdc_get_cd(struct mmc_host *mmc)
+{
+ int ret = 0;
+
+ if (mmc_can_gpio_cd(mmc))
+ ret = mmc_gpio_get_cd(mmc);
+ if (ret < 0)
+ ret = 0;
+
+ return ret;
+}
+
+static void spsdc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct spsdc_host *host = mmc_priv(mmc);
+ u32 value = readl(host->base + SPSD2_SD_INT_REG);
+
+ value |= SPSDC_SDINT_SDIO_CLR;
+ if (enable)
+ value |= SPSDC_SDINT_SDIOEN;
+ else
+ value &= ~SPSDC_SDINT_SDIOEN;
+ writel(value, host->base + SPSD2_SD_INT_REG);
+}
+
+static const struct mmc_host_ops spsdc_ops = {
+ .request = spsdc_request,
+ .set_ios = spsdc_set_ios,
+ .get_cd = spsdc_get_cd,
+ .enable_sdio_irq = spsdc_enable_sdio_irq,
+};
+
+static void tsklet_func_finish_req(unsigned long data)
+{
+ struct spsdc_host *host = (struct spsdc_host *)data;
+
+ spin_lock(&host->lock);
+ spsdc_finish_request(host, host->mrq);
+ spin_unlock(&host->lock);
+}
+
+static void spsdc_disable_unprepare(void *data)
+{
+ clk_disable_unprepare(data);
+}
+
+static void spsdc_reset_control_assert(void *data)
+{
+ reset_control_assert(data);
+}
+
+static int spsdc_drv_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct resource *res;
+ struct spsdc_host *host;
+ unsigned int mode;
+ int ret = 0;
+
+ mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto probe_free_host;
+ }
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->power_state = MMC_POWER_OFF;
+ host->dma_int_threshold = 1024;
+ host->dmapio_mode = SPSDC_DMA_MODE;
+ host->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(host->base))
+ return PTR_ERR(host->base);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq <= 0)
+ return host->irq;
+
+ ret = devm_request_irq(&pdev->dev, host->irq, spsdc_irq,
+ IRQF_SHARED, dev_name(&pdev->dev), host);
+ if (ret)
+ return ret;
+
+ host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(host->clk), "clk get fail\n");
+
+ host->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(host->rstc))
+ return dev_err_probe(&pdev->dev, PTR_ERR(host->rstc), "rst get fail\n");
+
+ ret = clk_prepare_enable(host->clk);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "failed to enable clk\n");
+
+ ret = devm_add_action_or_reset(&pdev->dev, spsdc_disable_unprepare, host->clk);
+ if (ret)
+ return ret;
+
+ ret = reset_control_deassert(host->rstc);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "failed to deassert reset\n");
+
+ ret = devm_add_action_or_reset(&pdev->dev, spsdc_reset_control_assert, host->rstc);
+ if (ret)
+ return ret;
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto probe_free_host;
+
+ spin_lock_init(&host->lock);
+ mutex_init(&host->mrq_lock);
+ tasklet_init(&host->tsklet_finish_req, tsklet_func_finish_req, (unsigned long)host);
+ mmc->ops = &spsdc_ops;
+ mmc->f_min = SPSDC_MIN_CLK;
+ if (mmc->f_max > SPSDC_MAX_CLK)
+ mmc->f_max = SPSDC_MAX_CLK;
+
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->max_seg_size = SPSDC_MAX_BLK_COUNT * 512;
+ /* Host controller supports up to "SPSDC_MAX_DMA_MEMORY_SECTORS",
+ * a.k.a. max scattered memory segments per request
+ */
+ /* Limited by the max value of dma_size & data_length, set it to 512 bytes for now */
+ mmc->max_segs = SPSDC_MAX_DMA_MEMORY_SECTORS;
+ mmc->max_req_size = SPSDC_MAX_BLK_COUNT * 512;
+ mmc->max_blk_size = 512;
+ mmc->max_blk_count = SPSDC_MAX_BLK_COUNT; /* Limited by sd_page_num */
+
+ dev_set_drvdata(&pdev->dev, host);
+ spsdc_controller_init(host);
+ mode = (int)of_device_get_match_data(&pdev->dev);
+ spsdc_select_mode(host, mode);
+ mmc_add_host(mmc);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ return ret;
+
+probe_free_host:
+ if (mmc)
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static int spsdc_drv_remove(struct platform_device *dev)
+{
+ struct spsdc_host *host = platform_get_drvdata(dev);
+
+ mmc_remove_host(host->mmc);
+ pm_runtime_disable(&dev->dev);
+ platform_set_drvdata(dev, NULL);
+ mmc_free_host(host->mmc);
+
+ return 0;
+}
+
+static int spsdc_drv_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct spsdc_host *host;
+
+ host = platform_get_drvdata(dev);
+ mutex_lock(&host->mrq_lock); /* Make sure that no one is holding the controller */
+ mutex_unlock(&host->mrq_lock);
+ clk_disable(host->clk);
+ return 0;
+}
+
+static int spsdc_drv_resume(struct platform_device *dev)
+{
+ struct spsdc_host *host;
+
+ host = platform_get_drvdata(dev);
+ return clk_enable(host->clk);
+}
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int spsdc_pm_suspend(struct device *dev)
+{
+ pm_runtime_force_suspend(dev);
+ return 0;
+}
+
+static int spsdc_pm_resume(struct device *dev)
+{
+ pm_runtime_force_resume(dev);
+ return 0;
+}
+#endif /* ifdef CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_RUNTIME_SD
+static int spsdc_pm_runtime_suspend(struct device *dev)
+{
+ struct spsdc_host *host;
+
+ host = dev_get_drvdata(dev);
+ if (__clk_is_enabled(host->clk))
+ clk_disable(host->clk);
+ return 0;
+}
+
+static int spsdc_pm_runtime_resume(struct device *dev)
+{
+ struct spsdc_host *host;
+ int ret = 0;
+
+ host = dev_get_drvdata(dev);
+ if (!host->mmc)
+ return -EINVAL;
+ if (mmc_can_gpio_cd(host->mmc)) {
+ ret = mmc_gpio_get_cd(host->mmc);
+ if (!ret)
+ return 0;
+ }
+ return clk_enable(host->clk);
+}
+#endif /* ifdef CONFIG_PM_RUNTIME_SD */
+
+static const struct dev_pm_ops spsdc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(spsdc_pm_suspend, spsdc_pm_resume)
+#ifdef CONFIG_PM_RUNTIME_SD
+ SET_RUNTIME_PM_OPS(spsdc_pm_runtime_suspend, spsdc_pm_runtime_resume, NULL)
+#endif
+};
+#endif /* ifdef CONFIG_PM */
+
+static const struct of_device_id spsdc_of_table[] = {
+ {
+ .compatible = "sunplus,sp7021-card",
+ .data = (void *)SPSDC_MODE_SD,
+ },
+ {
+ .compatible = "sunplus,sp7021-sdio",
+ .data = (void *)SPSDC_MODE_SDIO,
+ },
+ {/* sentinel */}
+
+};
+MODULE_DEVICE_TABLE(of, spsdc_of_table);
+
+static struct platform_driver spsdc_driver = {
+ .probe = spsdc_drv_probe,
+ .remove = spsdc_drv_remove,
+ .suspend = spsdc_drv_suspend,
+ .resume = spsdc_drv_resume,
+ .driver = {
+ .name = "spsdc",
+#ifdef CONFIG_PM
+ .pm = &spsdc_pm_ops,
+#endif
+ .of_match_table = spsdc_of_table,
+ },
+};
+module_platform_driver(spsdc_driver);
+
+MODULE_AUTHOR("Li-hao Kuo <lhjeff911@gmail.com>");
+MODULE_DESCRIPTION("Thermal driver for SP7021 SoC");
+MODULE_LICENSE("GPL v2");
--
2.7.4
\
 
 \ /
  Last update: 2021-12-24 07:06    [W:0.118 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site