lkml.org 
[lkml]   [2021]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] mmc: rtsx: improve performance for multi block rw
On Thu, 23 Dec 2021 at 11:27, Ricky WU <ricky_wu@realtek.com> wrote:
>
> > -----Original Message-----
> > From: Ulf Hansson <ulf.hansson@linaro.org>
> > Sent: Tuesday, December 21, 2021 8:51 PM
> > To: Ricky WU <ricky_wu@realtek.com>
> > Cc: tommyhebb@gmail.com; linux-mmc@vger.kernel.org;
> > linux-kernel@vger.kernel.org
> > Subject: Re: [PATCH v3] mmc: rtsx: improve performance for multi block rw
> >
> > On Tue, 21 Dec 2021 at 13:24, Ricky WU <ricky_wu@realtek.com> wrote:
> > >
> > > Improving performance for the CMD is multi-block read/write and the
> > > data is sequential.
> > > sd_check_multi_seq() to distinguish multi-block RW (CMD 18/25) or
> > > normal RW (CMD 17/24) if the CMD is multi-block and the data is
> > > sequential then call to sd_rw_multi_seq()
> > >
> > > This patch mainly to control the timing of reply at CMD 12/13.
> > > Originally code driver reply CMD 12/13 at every RW (CMD 18/25).
> > > The new code to distinguish multi-block RW(CMD 18/25) and the data is
> > > sequential or not, if the data is sequential RW driver do not send CMD
> > > 12 and bypass CMD 13 until wait the different direction RW CMD or
> > > trigger the delay_work to sent CMD 12.
> > >
> > > run benchmark result as below:
> > > SD Card : Samsumg Pro Plus 128GB
> > > Number of Samples:100, Sample Size:10MB <Before> Read : 86.9 MB/s,
> > > Write : 38.3 MB/s <After> Read : 91.5 MB/s, Write : 55.5 MB/s
> >
> > A much nicer commit message, thanks a lot! Would you mind running some
> > additional tests, like random I/O read/writes?
> >
> > Also, please specify the benchmark tool and command you are using. In the
> > meantime, I will continue to look at the code.
> >
>
> The Tool just use Ubuntu internal GUI benchmark Tool in the "Disks"
> and the Tool don't have random I/O to choice...
>
> Do you have any suggestion for testing random I/O
> But we think random I/O will not change much

I would probably look into using fio, https://fio.readthedocs.io/en/latest/

Another option that I use frequently is iozone, https://www.iozone.org.
Here's a command line that I often use for iozone
./iozone -az -i0 -i1 -s 20m -y 16k -q 4m -I -f /mnt/sdcard/iozone.tmp -e

[...]

Kind regards
Uffe

\
 
 \ /
  Last update: 2021-12-23 11:39    [W:0.431 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site