lkml.org 
[lkml]   [2021]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 43/50] wilc1000: add support for zero-copy transmit of tx packets
Date
Add the infrastructure to enable zero-copy transmits.  This is
currently a no-op as the SPI or SDIO drivers will need to implement
hif_sk_buffs_tx to take advantage of this.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
---
.../net/wireless/microchip/wilc1000/wlan.c | 43 ++++++++++++++++++-
.../net/wireless/microchip/wilc1000/wlan.h | 2 +
2 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 08f3e96bf72cf..d96a7e2a0bd59 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -935,6 +935,44 @@ static int copy_and_send_packets(struct wilc *wilc, int entries)
return ret;
}

+/**
+ * zero_copy_send_packets() - send packets to the chip (copy-free).
+ * @wilc: Pointer to the wilc structure.
+ * @entries: The number of packets to send from the VMM table.
+ *
+ * Zero-copy version of sending the packets in the VMM table to the
+ * chip.
+ *
+ * Context: The wilc1000 bus must have been released but the chip
+ * must be awake.
+ *
+ * Return: Negative number on error, 0 on success.
+ */
+static int zero_copy_send_packets(struct wilc *wilc, int entries)
+{
+ const struct wilc_hif_func *func = wilc->hif_func;
+ struct wilc_skb_tx_cb *tx_cb;
+ struct sk_buff *tqe;
+ int ret, i = 0;
+
+ acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
+
+ ret = func->hif_clear_int_ext(wilc, ENABLE_TX_VMM);
+ if (ret == 0)
+ ret = func->hif_sk_buffs_tx(wilc, 0, entries, &wilc->chipq);
+
+ release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+
+ for (i = 0; i < entries; ++i) {
+ tqe = __skb_dequeue(&wilc->chipq);
+ tx_cb = WILC_SKB_TX_CB(tqe);
+ wilc->fw[tx_cb->q_num].count++;
+ wilc->chipq_bytes -= tqe->len;
+ wilc_wlan_tx_packet_done(tqe, ret == 0);
+ }
+ return ret;
+}
+
int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
{
int vmm_table_len, entries;
@@ -966,7 +1004,10 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
if (entries <= 0) {
ret = entries;
} else {
- ret = copy_and_send_packets(wilc, entries);
+ if (wilc->hif_func->hif_sk_buffs_tx)
+ ret = zero_copy_send_packets(wilc, entries);
+ else
+ ret = copy_and_send_packets(wilc, entries);
}
if (ret >= 0 && entries < vmm_table_len)
ret = WILC_VMM_ENTRY_FULL_RETRY;
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 11a54320ffd05..bda31f0970bda 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -367,6 +367,8 @@ struct wilc_hif_func {
int (*hif_read_size)(struct wilc *wilc, u32 *size);
int (*hif_block_tx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
int (*hif_block_rx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+ int (*hif_sk_buffs_tx)(struct wilc *wilc, u32 addr,
+ size_t num_skbs, struct sk_buff_head *skbs);
int (*hif_sync_ext)(struct wilc *wilc, int nint);
int (*enable_interrupt)(struct wilc *nic);
void (*disable_interrupt)(struct wilc *nic);
--
2.25.1
\
 
 \ /
  Last update: 2021-12-23 02:16    [W:0.364 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site