lkml.org 
[lkml]   [2021]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/10] kthread: Ensure struct kthread is present for all kthreads
Hi Eric,

On Wed, Dec 08, 2021 at 02:25:31PM -0600, Eric W. Biederman wrote:
> Today the rules are a bit iffy and arbitrary about which kernel
> threads have struct kthread present. Both idle threads and thread
> started with create_kthread want struct kthread present so that is
> effectively all kernel threads. Make the rule that if PF_KTHREAD
> and the task is running then struct kthread is present.
>
> This will allow the kernel thread code to using tsk->exit_code
> with different semantics from ordinary processes.
>
> To make ensure that struct kthread is present for all
> kernel threads move it's allocation into copy_process.
>
> Add a deallocation of struct kthread in exec for processes
> that were kernel threads.
>
> Move the allocation of struct kthread for the initial thread
> earlier so that it is not repeated for each additional idle
> thread.
>
> Move the initialization of struct kthread into set_kthread_struct
> so that the structure is always and reliably initailized.
>
> Clear set_child_tid in free_kthread_struct to ensure the kthread
> struct is reliably freed during exec. The function
> free_kthread_struct does not need to clear vfork_done during exec as
> exec_mm_release called from exec_mmap has already cleared vfork_done.
>
> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

This patch as commit 40966e316f86 ("kthread: Ensure struct kthread is
present for all kthreads") in -next causes an ARCH=arm
multi_v5_defconfig kernel to fail to boot in QEMU. I had to apply commit
6692c98c7df5 ("fork: Stop protecting back_fork_cleanup_cgroup_lock with
CONFIG_NUMA") to get it to build and I applied commit dd621ee0cf8e
("kthread: Warn about failed allocations for the init kthread") to avoid
the known runtime warning.

$ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- distclean multi_v5_defconfig all

$ qemu-system-arm \
-initrd rootfs.cpio \
-append earlycon \
-machine palmetto-bmc \
-no-reboot \
-dtb arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dtb \
-display none \
-kernel arch/arm/boot/zImage \
-m 512m \
-nodefaults \
-serial mon:stdio
qemu-system-arm: warning: nic ftgmac100.0 has no peer
qemu-system-arm: warning: nic ftgmac100.1 has no peer
Booting Linux on physical CPU 0x0
Linux version 5.16.0-rc1-00016-g40966e316f86-dirty (nathan@archlinux-ax161) (arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 PREEMPT Wed Dec 22 18:08:53 UTC 2021
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
CPU: VIVT data cache, VIVT instruction cache
OF: fdt: Machine model: Palmetto BMC
earlycon: ns16550a0 at MMIO 0x1e784000 (options '')
printk: bootconsole [ns16550a0] enabled
Memory policy: Data cache writethrough
cma: Reserved 16 MiB at 0x5b000000
Zone ranges:
DMA [mem 0x0000000040000000-0x000000005edfffff]
Normal empty
HighMem [mem 0x000000005ee00000-0x000000005fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000040000000-0x000000005bffffff]
node 0: [mem 0x000000005c000000-0x000000005dffffff]
node 0: [mem 0x000000005e000000-0x000000005edfffff]
node 0: [mem 0x000000005ee00000-0x000000005fffffff]
Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
Built 1 zonelists, mobility grouping on. Total pages: 130084
Kernel command line: earlycon
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 433140K/524288K available (9628K kernel code, 2019K rwdata, 2368K rodata, 340K init, 661K bss, 74764K reserved, 16384K cma-reserved, 0K highmem)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
Trampoline variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
i2c controller registered, irq 16
random: get_random_bytes called from start_kernel+0x408/0x624 with crng_init=0
clocksource: FTTMR010-TIMER2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
Switching to timer-based delay loop, resolution 41ns
Console: colour dummy device 80x30
printk: console [tty0] enabled
printk: bootconsole [ns16550a0] disabled

After that, it just hangs.

The rootfs is available at https://github.com/ClangBuiltLinux/boot-utils
in the images/arm folder.

If there is any more information that I can provide or changes to test,
please let me know.

Cheers,
Nathan

\
 
 \ /
  Last update: 2021-12-22 19:20    [W:0.998 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site