lkml.org 
[lkml]   [2021]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 00/13] riscv: compat: Add COMPAT mode support for rv64
On Wed, Dec 22, 2021 at 12:35 AM <guoren@kernel.org> wrote:
>
> From: Guo Ren <guoren@linux.alibaba.com>
>
> Currently, most 64-bit architectures (x86, parisc, powerpc, arm64,
> s390, mips, sparc) have supported COMPAT mode. But they all have
> history issues and can't use standard linux unistd.h. RISC-V would
> be first standard __SYSCALL_COMPAT user of include/uapi/asm-generic
> /unistd.h.
>
> The patchset are based on v5.16-rc6, you can compare rv64-compat32
> v.s. rv32-whole in qemu with following step:
>
> - Prepare rv32 rootfs & fw_jump.bin by buildroot.org
> $ git clone git://git.busybox.net/buildroot
> $ cd buildroot
> $ make qemu_riscv32_virt_defconfig O=qemu_riscv32_virt_defconfig
> $ make -C qemu_riscv32_virt_defconfig
> $ make qemu_riscv64_virt_defconfig O=qemu_riscv64_virt_defconfig
> $ make -C qemu_riscv64_virt_defconfig
> (Got fw_jump.bin & rootfs.ext2 in qemu_riscvXX_virt_defconfig/images)
>
> - Prepare Linux rv32 & rv64 Image
> $ git clone git@github.com:c-sky/csky-linux.git -b riscv_compat_v1 linux
> $ cd linux
> $ make ARCH=riscv CROSS_COMPILE=riscv32-buildroot-linux-gnu- O=../build-rv32/ rv32_defconfig
> $ make ARCH=riscv CROSS_COMPILE=riscv32-buildroot-linux-gnu- O=../build-rv32/ Image
> $ make ARCH=riscv CROSS_COMPILE=riscv64-buildroot-linux-gnu- O=../build-rv64/ defconfig
You need menuconfig to enable CONFIG_COMPAT, here.

I forgot add CONFIG_COMPAT in defconfig or make CONFIG_COMPAT with def_bool.

> $ make ARCH=riscv CROSS_COMPILE=riscv64-buildroot-linux-gnu- O=../build-rv64/ Image
>
> - Prepare Qemu: (made by LIU Zhiwei <zhiwei_liu@c-sky.com>)
> $ git clone https://github.com/romanheros/qemu.git -b riscv-upstream-uxl-v5
> $ cd qemu
> $ ./configure --target-list="riscv64-softmmu riscv32-softmmu"
> $ make
>
> - Run rv64 with rv32 rootfs in compat mode:
> $ ./build/qemu-system-riscv64 -cpu rv64,x-h=true -M virt -m 64m -nographic -bios qemu_riscv64_virt_defconfig/images/fw_jump.bin -kernel build-rv64/Image -drive file qemu_riscv32_virt_defconfig/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -append "rootwait root=/dev/vda ro console=ttyS0 earlycon=sbi" -netdev user,id=net0 -device virtio-net-device,netdev=net0
>
> QEMU emulator version 6.2.50 (v6.2.0-29-g196d7182c8)
> OpenSBI v0.9
> [ 0.000000] Linux version 5.16.0-rc6-00013-g60f122c486d0 (guoren@guoren-Z87-HD3) (riscv64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.37) #62 SMP Tue Dec 21 22:54:05 CST 2021
> [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
> [ 0.000000] Machine model: riscv-virtio,qemu
> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
> [ 0.000000] printk: bootconsole [sbi0] enabled
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA32 [mem 0x0000000080200000-0x0000000083ffffff]
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x0000000083ffffff]
> [ 0.000000] SBI specification v0.2 detected
> [ 0.000000] SBI implementation ID=0x1 Version=0x9
> [ 0.000000] SBI TIME extension detected
> [ 0.000000] SBI IPI extension detected
> [ 0.000000] SBI RFENCE extension detected
> [ 0.000000] SBI v0.2 HSM extension detected
> [ 0.000000] riscv: compat: 32bit U-mode applications support
> [ 0.000000] riscv: ISA extensions acdfhimsu
> [ 0.000000] riscv: ELF capabilities acdfim
> [ 0.000000] percpu: Embedded 17 pages/cpu s30696 r8192 d30744 u69632
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 15655
> [ 0.000000] Kernel command line: rootwait root=/dev/vda ro console=ttyS0 earlycon=sbi
> [ 0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] fixmap : 0xffffffcefee00000 - 0xffffffceff000000 (2048 kB)
> [ 0.000000] pci io : 0xffffffceff000000 - 0xffffffcf00000000 ( 16 MB)
> [ 0.000000] vmemmap : 0xffffffcf00000000 - 0xffffffcfffffffff (4095 MB)
> [ 0.000000] vmalloc : 0xffffffd000000000 - 0xffffffdfffffffff (65535 MB)
> [ 0.000000] lowmem : 0xffffffe000000000 - 0xffffffe003e00000 ( 62 MB)
> [ 0.000000] kernel : 0xffffffff80000000 - 0xffffffffffffffff (2047 MB)
> [ 0.000000] Memory: 43952K/63488K available (6180K kernel code, 4873K rwdata, 2048K rodata, 2146K init, 297K bss, 19536K reserved, 0K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] rcu: Hierarchical RCU implementation.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
> [ 0.000000] rcu: RCU debug extended QS entry/exit.
> [ 0.000000] Tracing variant of Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [ 0.000000] riscv-intc: 64 local interrupts mapped
> [ 0.000000] plic: plic@c000000: mapped 53 interrupts with 1 handlers for 2 contexts.
> ...
> Welcome to Buildroot
> buildroot login: root
> # cat /proc/cpuinfo
> processor : 0
> hart : 0
> isa : rv64imafdcsuh
> mmu : sv48
>
> # file /bin/busybox
> /bin/busybox: setuid ELF 32-bit LSB shared object, UCB RISC-V, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-riscv32-ilp32d.so.1, for GNU/Linux 5.15.0, stripped
> # cat /proc/meminfo
> MemTotal: 46096 kB
> MemFree: 30116 kB
> MemAvailable: 32824 kB
> Buffers: 664 kB
> Cached: 3900 kB
> SwapCached: 0 kB
> Active: 3164 kB
> Inactive: 1920 kB
> Active(anon): 40 kB
> Inactive(anon): 524 kB
> Active(file): 3124 kB
> Inactive(file): 1396 kB
> Unevictable: 0 kB
> Mlocked: 0 kB
> SwapTotal: 0 kB
> SwapFree: 0 kB
> Dirty: 8 kB
> Writeback: 0 kB
> AnonPages: 556 kB
> Mapped: 2084 kB
> Shmem: 44 kB
> KReclaimable: 964 kB
> Slab: 5760 kB
> SReclaimable: 964 kB
> SUnreclaim: 4796 kB
> KernelStack: 624 kB
> PageTables: 132 kB
> NFS_Unstable: 0 kB
> Bounce: 0 kB
> WritebackTmp: 0 kB
> CommitLimit: 23048 kB
> Committed_AS: 2088 kB
> VmallocTotal: 67108863 kB
> VmallocUsed: 636 kB
> VmallocChunk: 0 kB
> Percpu: 80 kB
> #
>
> - Run rv32 with rv32 rootfs:
> $ ./build/qemu-system-riscv32 -cpu rv32,x-h=true -M virt -m 64m -nographic -bios qemu_riscv32_virt_defconfig/images/fw_jump.bin -kernel build-rv32/Image -drive file qemu_riscv32_virt_defconfig/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -append "rootwait root=/dev/vda ro console=ttyS0 earlycon=sbi" -netdev user,id=net0 -device virtio-net-device,netdev=net0
>
> QEMU emulator version 6.2.50 (v6.2.0-29-g196d7182c8)
> OpenSBI v0.9
> [ 0.000000] Linux version 5.16.0-rc6-00013-g60f122c486d0 (guoren@guoren-Z87-HD3) (riscv32-buildroot-linux-gnu-gcc.br_real (Buildroot 2021.11-201-g7600ca7960-dirty) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #4 SMP Tue Dec 21 22:54:43 CST 2021
> [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80400000
> [ 0.000000] Machine model: riscv-virtio,qemu
> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
> [ 0.000000] printk: bootconsole [sbi0] enabled
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] Zone ranges:
> [ 0.000000] Normal [mem 0x0000000080400000-0x0000000083ffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000080400000-0x0000000083ffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000080400000-0x0000000083ffffff]
> [ 0.000000] SBI specification v0.2 detected
> [ 0.000000] SBI implementation ID=0x1 Version=0x9
> [ 0.000000] SBI TIME extension detected
> [ 0.000000] SBI IPI extension detected
> [ 0.000000] SBI RFENCE extension detected
> [ 0.000000] SBI v0.2 HSM extension detected
> [ 0.000000] riscv: ISA extensions acdfhimsu
> [ 0.000000] riscv: ELF capabilities acdfim
> [ 0.000000] percpu: Embedded 12 pages/cpu s16600 r8192 d24360 u49152
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 15240
> [ 0.000000] Kernel command line: rootwait root=/dev/vda ro console=ttyS0 earlycon=sbi
> [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] fixmap : 0x9dc00000 - 0x9e000000 (4096 kB)
> [ 0.000000] pci io : 0x9e000000 - 0x9f000000 ( 16 MB)
> [ 0.000000] vmemmap : 0x9f000000 - 0x9fffffff ( 15 MB)
> [ 0.000000] vmalloc : 0xa0000000 - 0xbfffffff ( 511 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xc3c00000 ( 60 MB)
> [ 0.000000] Memory: 35332K/61440K available (6073K kernel code, 8814K rwdata, 4096K rodata, 4160K init, 241K bss, 26108K reserved, 0K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] rcu: Hierarchical RCU implementation.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
> [ 0.000000] rcu: RCU debug extended QS entry/exit.
> [ 0.000000] Tracing variant of Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [ 0.000000] riscv-intc: 32 local interrupts mapped
> [ 0.000000] plic: plic@c000000: mapped 53 interrupts with 1 handlers for 2 contexts.
> ...
> Welcome to Buildroot
> buildroot login: root
> # cat /proc/cpuinfo
> processor : 0
> hart : 0
> isa : rv32imafdcsuh
> mmu : sv32
>
> # file /bin/busybox
> /bin/busybox: setuid ELF 32-bit LSB shared object, UCB RISC-V, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-riscv32-ilp32d.so.1, for GNU/Linux 5.15.0, stripped
> # cat /proc/meminfo
> MemTotal: 39492 kB
> MemFree: 26756 kB
> MemAvailable: 29552 kB
> Buffers: 668 kB
> Cached: 3908 kB
> SwapCached: 0 kB
> Active: 3156 kB
> Inactive: 1936 kB
> Active(anon): 40 kB
> Inactive(anon): 520 kB
> Active(file): 3116 kB
> Inactive(file): 1416 kB
> Unevictable: 0 kB
> Mlocked: 0 kB
> SwapTotal: 0 kB
> SwapFree: 0 kB
> Dirty: 0 kB
> Writeback: 0 kB
> AnonPages: 552 kB
> Mapped: 2144 kB
> Shmem: 44 kB
> KReclaimable: 624 kB
> Slab: 3660 kB
> SReclaimable: 624 kB
> SUnreclaim: 3036 kB
> KernelStack: 312 kB
> PageTables: 92 kB
> NFS_Unstable: 0 kB
> Bounce: 0 kB
> WritebackTmp: 0 kB
> CommitLimit: 19744 kB
> Committed_AS: 2088 kB
> VmallocTotal: 524287 kB
> VmallocUsed: 12 kB
> VmallocChunk: 0 kB
> Percpu: 60 kB
> #
>
> Some conclusions:
> - rv32 linux kernel code, data sizes are larger than rv64.
> (complier's issue?)
> - rv32 kernel runtime KernelStack, Slab... are smaller,
> but not so much for memory footprint saving.
> - Totally rv64 kernel is much better than rv32.
> - Qemu, kernel, rv32 = rv64 defconfig, rootfs, opensbi
> are the same in this comparison.
>
> Guo Ren (13):
> syscalls: compat: Fix the missing part for __SYSCALL_COMPAT
> riscv: Fixup difference with defconfig
> riscv: compat: Add basic compat date type implementation
> riscv: compat: Re-implement TASK_SIZE for COMPAT_32BIT
> riscv: compat: syscall: Add compat_sys_call_table implementation
> riscv: compat: syscall: Add entry.S implementation
> riscv: compat: Add elf.h implementation
> riscv: compat: Add COMPAT Kbuild skeletal support
> riscv: compat: init: Add hw-cap detect in setup_arch
> riscv: compat: vdso: Add rv32 VDSO base code implementation
> riscv: compat: vdso: Add setup additional pages implementation
> riscv: compat: signal: Add rt_frame implementation
> riscv: compat: ptrace: Add compat_arch_ptrace implement
>
> arch/riscv/Kconfig | 22 ++
> arch/riscv/Makefile | 5 +
> arch/riscv/configs/rv32_defconfig | 20 +-
> arch/riscv/include/asm/compat.h | 259 ++++++++++++++++++
> arch/riscv/include/asm/csr.h | 7 +
> arch/riscv/include/asm/elf.h | 53 +++-
> arch/riscv/include/asm/mmu.h | 1 +
> arch/riscv/include/asm/pgtable.h | 11 +-
> arch/riscv/include/asm/processor.h | 10 +
> arch/riscv/include/asm/syscall.h | 3 +
> arch/riscv/include/asm/thread_info.h | 1 +
> arch/riscv/include/asm/vdso.h | 9 +
> arch/riscv/kernel/Makefile | 3 +
> arch/riscv/kernel/compat_signal.c | 243 ++++++++++++++++
> arch/riscv/kernel/compat_syscall_table.c | 84 ++++++
> arch/riscv/kernel/compat_vdso/.gitignore | 2 +
> arch/riscv/kernel/compat_vdso/Makefile | 68 +++++
> arch/riscv/kernel/compat_vdso/compat_vdso.S | 8 +
> .../kernel/compat_vdso/compat_vdso.lds.S | 3 +
> arch/riscv/kernel/compat_vdso/flush_icache.S | 3 +
> .../compat_vdso/gen_compat_vdso_offsets.sh | 5 +
> arch/riscv/kernel/compat_vdso/getcpu.S | 3 +
> arch/riscv/kernel/compat_vdso/note.S | 3 +
> arch/riscv/kernel/compat_vdso/rt_sigreturn.S | 3 +
> arch/riscv/kernel/entry.S | 18 +-
> arch/riscv/kernel/process.c | 32 +++
> arch/riscv/kernel/ptrace.c | 87 +++++-
> arch/riscv/kernel/setup.c | 5 +
> arch/riscv/kernel/signal.c | 13 +-
> arch/riscv/kernel/vdso.c | 104 +++++--
> arch/riscv/kernel/vdso/vdso.S | 6 +-
> drivers/firmware/efi/libstub/efi-stub.c | 2 +-
> include/uapi/asm-generic/unistd.h | 4 +-
> tools/include/uapi/asm-generic/unistd.h | 4 +-
> 34 files changed, 1055 insertions(+), 49 deletions(-)
> create mode 100644 arch/riscv/include/asm/compat.h
> create mode 100644 arch/riscv/kernel/compat_signal.c
> create mode 100644 arch/riscv/kernel/compat_syscall_table.c
> create mode 100644 arch/riscv/kernel/compat_vdso/.gitignore
> create mode 100644 arch/riscv/kernel/compat_vdso/Makefile
> create mode 100644 arch/riscv/kernel/compat_vdso/compat_vdso.S
> create mode 100644 arch/riscv/kernel/compat_vdso/compat_vdso.lds.S
> create mode 100644 arch/riscv/kernel/compat_vdso/flush_icache.S
> create mode 100755 arch/riscv/kernel/compat_vdso/gen_compat_vdso_offsets.sh
> create mode 100644 arch/riscv/kernel/compat_vdso/getcpu.S
> create mode 100644 arch/riscv/kernel/compat_vdso/note.S
> create mode 100644 arch/riscv/kernel/compat_vdso/rt_sigreturn.S
>
> --
> 2.25.1
>


--
Best Regards
Guo Ren

ML: https://lore.kernel.org/linux-csky/

\
 
 \ /
  Last update: 2021-12-22 13:02    [W:0.224 / U:1.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site