lkml.org 
[lkml]   [2021]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] serial: mps2-uart: Check for error irq
From
Date
On 12/22/21 3:36 AM, Jiasheng Jiang wrote:
> I find that platform_get_irq() will not always succeed.
> It will return error irq in case there is no suitable irq.
> Therefore, it might be better to check it if order to avoid the use of
> error irq.
>
> Fixes: 041f031def33 ("serial: mps2-uart: add MPS2 UART driver")
> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
> ---
> drivers/tty/serial/mps2-uart.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
> index 587b42f754cb..117d9896051f 100644
> --- a/drivers/tty/serial/mps2-uart.c
> +++ b/drivers/tty/serial/mps2-uart.c
> @@ -585,10 +585,20 @@ static int mps2_init_port(struct platform_device *pdev,
>
> if (mps_port->flags & UART_PORT_COMBINED_IRQ) {
> mps_port->port.irq = platform_get_irq(pdev, 0);
> + if (mps_port->port.irq < 0)
> + return mps_port->port.irq;
> } else {
> mps_port->rx_irq = platform_get_irq(pdev, 0);
> + if (mps_port->rx_irq < 0)
> + return mps_port->rx_irq;
> +
> mps_port->tx_irq = platform_get_irq(pdev, 1);
> + if (mps_port->tx_irq < 0)
> + return mps_port->tx_irq;
> +
> mps_port->port.irq = platform_get_irq(pdev, 2);
> + if (mps_port->port.irq < 0)
> + return mps_port->port.irq;
> }
>
> return ret;
>

Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>

\
 
 \ /
  Last update: 2021-12-22 11:23    [W:0.033 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site