lkml.org 
[lkml]   [2021]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v2 0/6] remoteproc: restructure the remoteproc VirtIO device
Date
Update from V1 [1]:
- miscellaneous fixes based on Bjorn Andersson'and Mathieu Poirier's comments
- add "arm64: defconfig: Config that had RPMSG_CHAR now gets RPMSG_CTRL"
for 5.16 compatibility
- remove the REMOTEPROC_VIRTIO config.
- kept rproc_register_rvdev() and rproc_unregister_rvdev() but in a separate patch
- miscellaneous typo fixes.

[1] https://lkml.org/lkml/2021/10/1/243

Patchset description:

This series is a part of the work initiated a long time ago in
the series "remoteproc: Decorelate virtio from core"[2]


Objective of the work:
- Update the remoteproc VirtIO device creation (use platform device)
- Allow to declare remoteproc VirtIO device in DT
- declare resources associated to a remote proc VirtIO
- declare a list of VirtIO supported by the platform.
- Prepare the enhancement to more VirtIO devices (e.g I2C, audio, video, ...).
For instance be able to declare a I2C device in a virtio-i2C node.
- Keep the legacy working!
- Try to improve the picture about concerns reported by Christoph Hellwing [3][4]

[2] https://lkml.org/lkml/2020/4/16/1817
[3] https://lkml.org/lkml/2021/6/23/607
[4] https://patchwork.kernel.org/project/linux-remoteproc/patch/AOKowLclCbOCKxyiJ71WeNyuAAj2q8EUtxrXbyky5E@cp7-web-042.plabs.ch/

In term of device tree this would result in such hiearchy (stm32mp1 example with 2 virtio RPMSG):

m4_rproc: m4@10000000 {
compatible = "st,stm32mp1-m4";
reg = <0x10000000 0x40000>,
<0x30000000 0x40000>,
<0x38000000 0x10000>;
memory-region = <&retram>, <&mcuram>,<&mcuram2>;
mboxes = <&ipcc 2>, <&ipcc 3>;
mbox-names = "shutdown", "detach";
status = "okay";

#address-cells = <1>;
#size-cells = <0>;

vdev@0 {
compatible = "rproc-virtio";
reg = <0>;
virtio,id = <7>; /* RPMSG */
memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>;
mboxes = <&ipcc 0>, <&ipcc 1>;
mbox-names = "vq0", "vq1";
status = "okay";
};

vdev@1 {
compatible = "rproc-virtio";
reg = <1>;
virtio,id = <7>; /*RPMSG */
memory-region = <&vdev1vring0>, <&vdev1vring1>, <&vdev1buffer>;
mboxes = <&ipcc 4>, <&ipcc 5>;
mbox-names = "vq0", "vq1";
status = "okay";
};
};

I have divided the work in 4 steps to simplify the review, This series implements only
the step 1:
step 1: redefine the remoteproc VirtIO device as a platform device
- migrate rvdev management in remoteproc virtio.c,
- create a remotproc virtio config ( can be disabled for platform that not use VirtIO IPC.
step 2: add possibility to declare and prob a VirtIO sub node
- VirtIO bindings declaration,
- multi DT VirtIO devices support,
- introduction of a remote proc virtio bind device mechanism ,
=> https://github.com/arnopo/linux/commits/step2-virtio-in-DT
step 3: Add memory declaration in VirtIO subnode
=> https://github.com/arnopo/linux/commits/step3-virtio-memories
step 4: Add mailbox declaration in VirtIO subnode
=> https://github.com/arnopo/linux/commits/step4-virtio-mailboxes

Arnaud Pouliquen (6):
remoteproc: core: Introduce virtio device add/remove functions
remoteproc: core: Introduce rproc_register_rvdev function
remoteproc: Move rproc_vdev management to remoteproc_virtio.c
remoteproc: virtio: Create platform device for the remoteproc_virtio
remoteproc: virtio: Add helper to create platform device
remoteproc: Instantiate the new remoteproc virtio platform device

drivers/remoteproc/remoteproc_core.c | 145 ++++-------------
drivers/remoteproc/remoteproc_internal.h | 26 ++-
drivers/remoteproc/remoteproc_virtio.c | 195 +++++++++++++++++++++--
include/linux/remoteproc.h | 6 +-
4 files changed, 233 insertions(+), 139 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2021-12-22 09:24    [W:0.092 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site