lkml.org 
[lkml]   [2021]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/2] Use "ref" clocks from firmware for DSI PLL VCO parent
On 2021-12-15 16:43:45, Stephen Boyd wrote:
> Quoting Dmitry Baryshkov (2021-12-15 12:02:37)
> > On 14/12/2021 22:46, Marijn Suijten wrote:
> > > Hi all,
> > >
> > > On 2021-09-18 16:40:38, Marijn Suijten wrote:
> > >> On 2021-09-14 14:44:01, Stephen Boyd wrote:
> > >>> Quoting Marijn Suijten (2021-09-11 06:19:19)
> > >>>> All DSI PHY/PLL drivers were referencing their VCO parent clock by a
> > >>>> global name, most of which don't exist or have been renamed. These
> > >>>> clock drivers seem to function fine without that except the 14nm driver
> > >>>> for sdm6xx [1].
> > >>>>
> > >>>> At the same time all DTs provide a "ref" clock as per the requirements
> > >>>> of dsi-phy-common.yaml, but the clock is never used. This patchset puts
> > >>>> that clock to use without relying on a global clock name, so that all
> > >>>> dependencies are explicitly defined in DT (the firmware) in the end.
> > >>>
> > >>> I can take this through clk tree if it helps avoid conflicts. There are
> > >>> some other patches to sdm660.c in the clk tree already.
> > >>
> > >> Might be useful to maintain proper ordering of these dependent patches
> > >> but it's up to Dmitry and Rob to decide, whom I'm sending this mail
> > >> directly to so that they can chime in.
> > >
> > > Dependent patch [3] landed in 5.15 and [2] made it into 5.16 rc's - is
> > > it time to pick this series up and if so through what tree?
> >
> > I'd also second the idea of merging these two patches into 5.17.
> > Most probably it'd be easier to merge both of them through the clk tree.
> > Or we can take the first patch into drm-msm (but then we'd have a
> > dependency between msm-next and clk-qcom-next).
> >
> > Bjorn, Stephen?
> >
>
> Sounds fine to take through clk tree.

Thanks Stephen, would be great to take this in through the clk tree for
5.17. I don't have anything to add that could possibly warrant a v3,
only msm8996 remains with the "xo" clock but that needs more work in
other drivers and is best dealt with separately. Please take v2,
assuming there are enough acks/reviews :)

- Marijn

\
 
 \ /
  Last update: 2021-12-21 17:23    [W:0.076 / U:6.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site