lkml.org 
[lkml]   [2021]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/2] mmc: ingenic: Support bi-directional DMA channel
On Mon, 20 Dec 2021 at 20:08, Paul Cercueil <paul@crapouillou.net> wrote:
>
> Hi Ulf,
>
> This patchset adds support for using a single DMA channel for both RX
> and TX operations, instead of using separate DMA channels for each
> operation.
>
> As some older Ingenic SoCs offer only a handful of DMA channels,
> supporting bi-directional channels allow more hardware to use the
> channels that would otherwise be used for the MMC/SD operation.
>
> Note that the Device Tree binding for the DMA controller has been
> updated in a (already merged) patchset, so that it accepts a 3 cells
> (#dma-cells == 3) instead of just 2. It was merged in the DMA tree, so I
> am not sure the autobuilders will like this YAML - but it was checked
> without errors.
>
> I also removed the descriptions of the "dmas" property in the YAML, as
> they really weren't adding anything and were getting in my way.
>
> There are patches touching the driver file merged in the PM tree (the
> ones that use the new PM macros) but I expect no problem here, they
> touch different parts of the file.
>
> Cheers,
> -Paul
>
> Paul Cercueil (2):
> dt-bindings: mmc: ingenic: Support using bi-directional DMA channel
> mmc: jz4740: Support using a bi-directional DMA channel
>
> .../devicetree/bindings/mmc/ingenic,mmc.yaml | 37 ++++++++++++++++---
> drivers/mmc/host/jz4740_mmc.c | 19 +++++++++-
> 2 files changed, 48 insertions(+), 8 deletions(-)
>

Applied for next, thanks!

Let's see how this goes when the changes hit linux-next. I will have
to drop them, if we encounter any problems.

Kind regards
Uffe

\
 
 \ /
  Last update: 2021-12-21 14:04    [W:0.049 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site