lkml.org 
[lkml]   [2021]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH RESEND v4 1/4] dt-bindings: platform: microsoft: Document surface xbl
Date
On Tue, 21 Dec 2021 10:28:23 -0800, Jarrett Schultz wrote:
> From: Jarrett Schultz <jaschultz@microsoft.com>
>
> Introduce yaml for surface xbl driver.
>
> Signed-off-by: Jarrett Schultz <jaschultz@microsoft.com>
>
> ---
>
> Changes in v4:
> - Addressed small formatting changes
> - Removed unnecessary lines
>
> ---
>
> Changes in v3:
> - Updated description to only pertain to the hardware
> - Updated the required field to properly reflect the binding
> - Removed the first example
> - Fixed the size of the reg field in the second example
>
> ---
>
> Changes in v2:
> - Removed json-schema dependence
> - Elaborated on description of driver
> - Updated example
> ---
> .../platform/microsoft/surface-xbl.yaml | 64 +++++++++++++++++++
> MAINTAINERS | 7 ++
> 2 files changed, 71 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/platform/microsoft/surface-xbl.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/platform/microsoft/surface-xbl.example.dt.yaml:0:0: /imem@146bf000/xbl@a94: failed to match any schema with compatible: ['microsoft,sm8150-surface-duo-xbl']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1571914

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2021-12-21 23:46    [W:0.081 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site