lkml.org 
[lkml]   [2021]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 159/177] USB: core: Make do_proc_control() and do_proc_bulk() killable
Date
From: Alan Stern <stern@rowland.harvard.edu>

commit ae8709b296d80c7f45aa1f35c0e7659ad69edce1 upstream.

The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke
usb_start_wait_urb(), which contains an uninterruptible wait with a
user-specified timeout value. If timeout value is very large and the
device being accessed does not respond in a reasonable amount of time,
the kernel will complain about "Task X blocked for more than N
seconds", as found in testing by syzbot:

INFO: task syz-executor.0:8700 blocked for more than 143 seconds.
Not tainted 5.14.0-rc7-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4681 [inline]
__schedule+0xc07/0x11f0 kernel/sched/core.c:5938
schedule+0x14b/0x210 kernel/sched/core.c:6017
schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857
do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157
usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63
do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236
proc_bulk drivers/usb/core/devio.c:1273 [inline]
usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline]
usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713
...

To fix this problem, this patch replaces usbfs's calls to
usb_control_msg() and usb_bulk_msg() with special-purpose code that
does essentially the same thing (as recommended in the comment for
usb_start_wait_urb()), except that it always uses a killable wait and
it uses GFP_KERNEL rather than GFP_NOIO.

Reported-and-tested-by: syzbot+ada0f7d3d9fd2016d927@syzkaller.appspotmail.com
Suggested-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210903175312.GA468440@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/devio.c | 144 ++++++++++++++++++++++++++++++++++++-----------
1 file changed, 111 insertions(+), 33 deletions(-)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -32,6 +32,7 @@
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/usb/hcd.h> /* for usbcore internals */
+#include <linux/usb/quirks.h>
#include <linux/cdev.h>
#include <linux/notifier.h>
#include <linux/security.h>
@@ -1102,14 +1103,55 @@ static int usbdev_release(struct inode *
return 0;
}

+static void usbfs_blocking_completion(struct urb *urb)
+{
+ complete((struct completion *) urb->context);
+}
+
+/*
+ * Much like usb_start_wait_urb, but returns status separately from
+ * actual_length and uses a killable wait.
+ */
+static int usbfs_start_wait_urb(struct urb *urb, int timeout,
+ unsigned int *actlen)
+{
+ DECLARE_COMPLETION_ONSTACK(ctx);
+ unsigned long expire;
+ int rc;
+
+ urb->context = &ctx;
+ urb->complete = usbfs_blocking_completion;
+ *actlen = 0;
+ rc = usb_submit_urb(urb, GFP_KERNEL);
+ if (unlikely(rc))
+ return rc;
+
+ expire = (timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT);
+ rc = wait_for_completion_killable_timeout(&ctx, expire);
+ if (rc <= 0) {
+ usb_kill_urb(urb);
+ *actlen = urb->actual_length;
+ if (urb->status != -ENOENT)
+ ; /* Completed before it was killed */
+ else if (rc < 0)
+ return -EINTR;
+ else
+ return -ETIMEDOUT;
+ }
+ *actlen = urb->actual_length;
+ return urb->status;
+}
+
static int do_proc_control(struct usb_dev_state *ps,
struct usbdevfs_ctrltransfer *ctrl)
{
struct usb_device *dev = ps->dev;
unsigned int tmo;
unsigned char *tbuf;
- unsigned wLength;
+ unsigned int wLength, actlen;
int i, pipe, ret;
+ struct urb *urb = NULL;
+ struct usb_ctrlrequest *dr = NULL;

ret = check_ctrlrecip(ps, ctrl->bRequestType, ctrl->bRequest,
ctrl->wIndex);
@@ -1122,51 +1164,63 @@ static int do_proc_control(struct usb_de
sizeof(struct usb_ctrlrequest));
if (ret)
return ret;
+
+ ret = -ENOMEM;
tbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
- if (!tbuf) {
- ret = -ENOMEM;
+ if (!tbuf)
goto done;
- }
+ urb = usb_alloc_urb(0, GFP_NOIO);
+ if (!urb)
+ goto done;
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+ if (!dr)
+ goto done;
+
+ dr->bRequestType = ctrl->bRequestType;
+ dr->bRequest = ctrl->bRequest;
+ dr->wValue = cpu_to_le16(ctrl->wValue);
+ dr->wIndex = cpu_to_le16(ctrl->wIndex);
+ dr->wLength = cpu_to_le16(ctrl->wLength);
+
tmo = ctrl->timeout;
snoop(&dev->dev, "control urb: bRequestType=%02x "
"bRequest=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
ctrl->wIndex, ctrl->wLength);
- if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
+
+ if ((ctrl->bRequestType & USB_DIR_IN) && wLength) {
pipe = usb_rcvctrlpipe(dev, 0);
- snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);
+ usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf,
+ wLength, NULL, NULL);
+ snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, NULL, 0);

usb_unlock_device(dev);
- i = usb_control_msg(dev, pipe, ctrl->bRequest,
- ctrl->bRequestType, ctrl->wValue, ctrl->wIndex,
- tbuf, ctrl->wLength, tmo);
+ i = usbfs_start_wait_urb(urb, tmo, &actlen);
usb_lock_device(dev);
- snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE,
- tbuf, max(i, 0));
- if ((i > 0) && ctrl->wLength) {
- if (copy_to_user(ctrl->data, tbuf, i)) {
+ snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, tbuf, actlen);
+ if (!i && actlen) {
+ if (copy_to_user(ctrl->data, tbuf, actlen)) {
ret = -EFAULT;
- goto done;
+ goto recv_fault;
}
}
} else {
- if (ctrl->wLength) {
- if (copy_from_user(tbuf, ctrl->data, ctrl->wLength)) {
+ if (wLength) {
+ if (copy_from_user(tbuf, ctrl->data, wLength)) {
ret = -EFAULT;
goto done;
}
}
pipe = usb_sndctrlpipe(dev, 0);
- snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT,
- tbuf, ctrl->wLength);
+ usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf,
+ wLength, NULL, NULL);
+ snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, tbuf, wLength);

usb_unlock_device(dev);
- i = usb_control_msg(dev, pipe, ctrl->bRequest,
- ctrl->bRequestType, ctrl->wValue, ctrl->wIndex,
- tbuf, ctrl->wLength, tmo);
+ i = usbfs_start_wait_urb(urb, tmo, &actlen);
usb_lock_device(dev);
- snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0);
+ snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, NULL, 0);
}
if (i < 0 && i != -EPIPE) {
dev_printk(KERN_DEBUG, &dev->dev, "usbfs: USBDEVFS_CONTROL "
@@ -1174,8 +1228,15 @@ static int do_proc_control(struct usb_de
current->comm, ctrl->bRequestType, ctrl->bRequest,
ctrl->wLength, i);
}
- ret = i;
+ ret = (i < 0 ? i : actlen);
+
+ recv_fault:
+ /* Linger a bit, prior to the next control message. */
+ if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+ msleep(200);
done:
+ kfree(dr);
+ usb_free_urb(urb);
free_page((unsigned long) tbuf);
usbfs_decrease_memory_usage(PAGE_SIZE + sizeof(struct urb) +
sizeof(struct usb_ctrlrequest));
@@ -1195,10 +1256,11 @@ static int do_proc_bulk(struct usb_dev_s
struct usbdevfs_bulktransfer *bulk)
{
struct usb_device *dev = ps->dev;
- unsigned int tmo, len1, pipe;
- int len2;
+ unsigned int tmo, len1, len2, pipe;
unsigned char *tbuf;
int i, ret;
+ struct urb *urb = NULL;
+ struct usb_host_endpoint *ep;

ret = findintfep(ps->dev, bulk->ep);
if (ret < 0)
@@ -1206,14 +1268,17 @@ static int do_proc_bulk(struct usb_dev_s
ret = checkintf(ps, ret);
if (ret)
return ret;
+
+ len1 = bulk->len;
+ if (len1 < 0 || len1 >= (INT_MAX - sizeof(struct urb)))
+ return -EINVAL;
+
if (bulk->ep & USB_DIR_IN)
pipe = usb_rcvbulkpipe(dev, bulk->ep & 0x7f);
else
pipe = usb_sndbulkpipe(dev, bulk->ep & 0x7f);
- if (!usb_maxpacket(dev, pipe, !(bulk->ep & USB_DIR_IN)))
- return -EINVAL;
- len1 = bulk->len;
- if (len1 >= (INT_MAX - sizeof(struct urb)))
+ ep = usb_pipe_endpoint(dev, pipe);
+ if (!ep || !usb_endpoint_maxp(&ep->desc))
return -EINVAL;
ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
if (ret)
@@ -1223,17 +1288,29 @@ static int do_proc_bulk(struct usb_dev_s
* len1 can be almost arbitrarily large. Don't WARN if it's
* too big, just fail the request.
*/
+ ret = -ENOMEM;
tbuf = kmalloc(len1, GFP_KERNEL | __GFP_NOWARN);
- if (!tbuf) {
- ret = -ENOMEM;
+ if (!tbuf)
goto done;
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ goto done;
+
+ if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT) {
+ pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+ usb_fill_int_urb(urb, dev, pipe, tbuf, len1,
+ NULL, NULL, ep->desc.bInterval);
+ } else {
+ usb_fill_bulk_urb(urb, dev, pipe, tbuf, len1, NULL, NULL);
}
+
tmo = bulk->timeout;
if (bulk->ep & 0x80) {
snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0);

usb_unlock_device(dev);
- i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
+ i = usbfs_start_wait_urb(urb, tmo, &len2);
usb_lock_device(dev);
snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2);

@@ -1253,12 +1330,13 @@ static int do_proc_bulk(struct usb_dev_s
snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1);

usb_unlock_device(dev);
- i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
+ i = usbfs_start_wait_urb(urb, tmo, &len2);
usb_lock_device(dev);
snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0);
}
ret = (i < 0 ? i : len2);
done:
+ usb_free_urb(urb);
kfree(tbuf);
usbfs_decrease_memory_usage(len1 + sizeof(struct urb));
return ret;

\
 
 \ /
  Last update: 2021-12-20 16:19    [W:0.633 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site