lkml.org 
[lkml]   [2021]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/4] memory: omap-gpmc: Use a compatible match table when checking for NAND controller
From
Date


On 20/12/2021 13:05, Krzysztof Kozlowski wrote:
> On 20/12/2021 11:53, Roger Quadros wrote:
>>
>>
>> On 17/12/2021 17:21, Krzysztof Kozlowski wrote:
>>> On 17/12/2021 11:29, Roger Quadros wrote:
>>>> As more compatibles can be added to the GPMC NAND controller driver
>>>> use a compatible match table.
>>>>
>>>> Signed-off-by: Roger Quadros <rogerq@kernel.org>
>>>> ---
>>>> drivers/memory/omap-gpmc.c | 8 +++++++-
>>>> drivers/mtd/nand/raw/omap2.c | 2 +-
>>>> include/linux/platform_data/mtd-nand-omap2.h | 5 +++++
>>>> 3 files changed, 13 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
>>>> index 624153048182..814ddb45c13d 100644
>>>> --- a/drivers/memory/omap-gpmc.c
>>>> +++ b/drivers/memory/omap-gpmc.c
>>>> @@ -2091,6 +2091,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
>>>> u32 val;
>>>> struct gpio_desc *waitpin_desc = NULL;
>>>> struct gpmc_device *gpmc = platform_get_drvdata(pdev);
>>>> + bool is_nand = false;
>>>>
>>>> if (of_property_read_u32(child, "reg", &cs) < 0) {
>>>> dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
>>>> @@ -2183,7 +2184,12 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
>>>> }
>>>> }
>>>>
>>>> - if (of_device_is_compatible(child, "ti,omap2-nand")) {
>>>> +#if defined(CONFIG_MTD_NAND_OMAP2)
>>>
>>> if (IS_ENABLED()) is preferred. If needed, you could make omap_nand_ids
>>> symbol visible always (so without ifdef around it), because extern
>>> structure should not have impact when not defined (if I recall
>>> correctly...).
>>>
>>>> + if (of_match_node(omap_nand_ids, child))
>>>> + is_nand = true;
>>>> +#endif
>>>> +
>>>> + if (is_nand) {
>>>> /* NAND specific setup */
>>>> val = 8;
>>>> of_property_read_u32(child, "nand-bus-width", &val);
>>>> diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
>>>> index b26d4947af02..fff834ee726f 100644
>>>> --- a/drivers/mtd/nand/raw/omap2.c
>>>> +++ b/drivers/mtd/nand/raw/omap2.c
>>>> @@ -2352,7 +2352,7 @@ static int omap_nand_remove(struct platform_device *pdev)
>>>> return ret;
>>>> }
>>>>
>>>> -static const struct of_device_id omap_nand_ids[] = {
>>>> +const struct of_device_id omap_nand_ids[] = {
>>>> { .compatible = "ti,omap2-nand", },
>>>> {},
>>>> };
>>>
>>> I think OMAP2 NAND driver can be a module, so this should have
>>> EXPORT_SYMBOL.
>>
>> To make it work in all combinations (e.g. omap_gpmc built in and
>> nand/raw/omap2.c as module) I had to define omap_nand_ids table as static
>> in the linux/platform_data/mtd-nand-omap2.h header.
>>
>> EXPORT_SYMBOL will of course be not required there. ;)
>>
> Which case exactly does it require to be static in the header?

Maybe there is a better way to do it.
e.g. If omap_gpmc.c is built-in and nand/raw/omap2.c is not built or built as
a module, what better way we can use?

--
cheers,
-roger

\
 
 \ /
  Last update: 2021-12-20 12:52    [W:0.044 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site