lkml.org 
[lkml]   [2021]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] platform/chrome: Add driver for ChromeOS privacy-screen
On Mon, Dec 20, 2021 at 12:21:47PM -0800, Rajat Jain wrote:
> Hi Dmitry,
>
> Thanks for the review. Please see inline.
>
> On Mon, Dec 20, 2021 at 11:42 AM Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
> >
> > Hi Rajat,
> >
> > On Fri, Dec 17, 2021 at 12:28:49PM -0800, Rajat Jain wrote:
> > > This adds the ACPI driver for the ChromeOS privacy screen that is
> > > present on some chromeos devices.
> > >
> > > Note that ideally, we'd want this privacy screen driver to be probed
> > > BEFORE the drm probe in order to avoid a drm probe deferral:
> > > https://hansdegoede.livejournal.com/25948.html
> > >
> > > In practise, I found that ACPI drivers are bound to their devices AFTER
> > > the drm probe on chromebooks. So on chromebooks with privacy-screen,
> > > this patch along with the next one in this series results in a probe
> > > deferral of about 250ms for i915 driver. However, it did not result in
> > > any user noticeable delay of splash screen in my personal experience.
> > >
> > > In future if this probe deferral turns out to be an issue, we can
> > > consider turning this ACPI driver into something that is probed
> > > earlier than the drm drivers.
> > >
> > > Signed-off-by: Rajat Jain <rajatja@google.com>
> > > ---
> > > v2: * Reword the commit log
> > > * Make the Kconfig into a tristate
> > > * Reorder the patches in the series.
> > >
> > > drivers/platform/chrome/Kconfig | 9 ++
> > > drivers/platform/chrome/Makefile | 1 +
> > > drivers/platform/chrome/chromeos_priv_scrn.c | 132 +++++++++++++++++++
> > > 3 files changed, 142 insertions(+)
> > > create mode 100644 drivers/platform/chrome/chromeos_priv_scrn.c
> > >
> > > diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> > > index ccc23d8686e8..d1c209a45a62 100644
> > > --- a/drivers/platform/chrome/Kconfig
> > > +++ b/drivers/platform/chrome/Kconfig
> > > @@ -243,6 +243,15 @@ config CROS_USBPD_NOTIFY
> > > To compile this driver as a module, choose M here: the
> > > module will be called cros_usbpd_notify.
> > >
> > > +config CHROMEOS_PRIVACY_SCREEN
> > > + tristate "ChromeOS Privacy Screen support"
> > > + depends on ACPI
> > > + depends on DRM
> > > + select DRM_PRIVACY_SCREEN
> > > + help
> > > + This driver provides the support needed for the in-built electronic
> > > + privacy screen that is present on some ChromeOS devices.
> > > +
> > > source "drivers/platform/chrome/wilco_ec/Kconfig"
> > >
> > > endif # CHROMEOS_PLATFORMS
> > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> > > index f901d2e43166..cfa0bb4e9e34 100644
> > > --- a/drivers/platform/chrome/Makefile
> > > +++ b/drivers/platform/chrome/Makefile
> > > @@ -4,6 +4,7 @@
> > > CFLAGS_cros_ec_trace.o:= -I$(src)
> > >
> > > obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o
> > > +obj-$(CONFIG_CHROMEOS_PRIVACY_SCREEN) += chromeos_priv_scrn.o
> > > obj-$(CONFIG_CHROMEOS_PSTORE) += chromeos_pstore.o
> > > obj-$(CONFIG_CHROMEOS_TBMC) += chromeos_tbmc.o
> > > obj-$(CONFIG_CROS_EC) += cros_ec.o
> > > diff --git a/drivers/platform/chrome/chromeos_priv_scrn.c b/drivers/platform/chrome/chromeos_priv_scrn.c
> > > new file mode 100644
> > > index 000000000000..a4cbf5c79c2a
> > > --- /dev/null
> > > +++ b/drivers/platform/chrome/chromeos_priv_scrn.c
> >
> > I think we can spare a few more characters :) chromeos_privacy_screen.c
> > maybe?
> >
> > And also see if maybe variables in the code are not that unseemly long
> > even if not abbreviated?
>
> Sure, I can certainly replace "chromeos_priv_scrn" with
> "chromeos_privacy_screen" everywhere. Some of the variables may be a
> little long, but I think that should be OK (my main concern was
>
> chromeos_privacy_screen_device_ids
> chromeos_privacy_screen_get_hw_state()
>
> Let me know if that doesn't sound right (in which case, I can probably
> omit "chromeos" from the local variable and function names)

Another option to go all the way into different direction, and use
"cps_" prefix for everything. It is probably just me but combination of
"priv" "scrn" just grates on me ;)

>
> >
> > > @@ -0,0 +1,132 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +
> > > +/*
> > > + * chromeos_priv_scrn.c - ChromeOS Privacy Screen support
> >
> > I'd avoid mentioning file name as those tend to change.
>
> Ack, will do.
>
> >
> > > + *
> > > + * Copyright (C) 2022 The Chromium OS Authors
> >
> > This is not correct copyright for kernel contributions. It should be
> > attributed to "Google LLC". Note that it is different from CrOS
> > userspace.
> >
>
> Ack, will do.
>
> > > + *
> > > + */
> > > +
> > > +#include <linux/acpi.h>
> > > +#include <drm/drm_privacy_screen_driver.h>
> > > +
> > > +/*
> > > + * The DSM (Define Specific Method) constants below are the agreed API with
> > > + * the firmware team, on how to control privacy screen using ACPI methods.
> > > + */
> > > +#define PRIV_SCRN_DSM_REVID 1 /* DSM version */
> > > +#define PRIV_SCRN_DSM_FN_GET_STATUS 1 /* Get privacy screen status */
> > > +#define PRIV_SCRN_DSM_FN_ENABLE 2 /* Enable privacy screen */
> > > +#define PRIV_SCRN_DSM_FN_DISABLE 3 /* Disable privacy screen */
> > > +
> > > +static const guid_t chromeos_priv_scrn_dsm_guid =
> > > + GUID_INIT(0xc7033113, 0x8720, 0x4ceb,
> > > + 0x90, 0x90, 0x9d, 0x52, 0xb3, 0xe5, 0x2d, 0x73);
> > > +
> > > +static void
> > > +chromeos_priv_scrn_get_hw_state(struct drm_privacy_screen *drm_priv_scrn)
> > > +{
> > > + union acpi_object *obj;
> > > + acpi_handle handle;
> > > + struct device *priv_scrn = drm_priv_scrn->dev.parent;
> >
> > This is really bad that we need to poke into internals of
> > drm_privacy_screen to get to "our" device. I think there is only one
> > consume of the privacy screen API at the moment, the thinkpad driver, so
> > maybe it is not too late to change drm_privacy_screen_register() to
> > either accept instance of struct drm_privacy_screen (which then could be
> > embedded into something) or accept a void pointer to attach arbitrary
> > data to it, and then add drm_privacy_screen_get_drvdata() to get to that
> > pointer.
> >
>
> Sure, ack, will do.
>
> > > +
> > > + if (!priv_scrn)
> > > + return;
> >
> > This should not happen regardless.
> >
>
> Sure, ack, will remove.
>
> > > +
> > > + handle = acpi_device_handle(to_acpi_device(priv_scrn));
> > > + obj = acpi_evaluate_dsm(handle, &chromeos_priv_scrn_dsm_guid,
> > > + PRIV_SCRN_DSM_REVID,
> > > + PRIV_SCRN_DSM_FN_GET_STATUS, NULL);
> > > + if (!obj) {
> > > + dev_err(priv_scrn, "_DSM failed to get privacy-screen state\n");
> >
> > Can we do something about it? A dedicated status? Also, can we print
> > ACPI-specific error?
> >
>
> Umm ... I don't know. We don't know anything beyond that the ACPI
> method wasn't able to get us anything. There are no other status other
> than the ones specified in enum drm_privacy_screen_status. Since that
> enum was the result of almost 1.5 year of discussion between pekka,
> Hans and other or drm mailing lists, I don't wat to change that.

OK, I guess we need to chose a fine default here, probably assume
privacy screen is inoperable/disabled.

>
> > > + return;
> > > + }
> > > +
> > > + if (obj->type != ACPI_TYPE_INTEGER)
> > > + dev_err(priv_scrn, "Bad _DSM to get privacy-screen state\n");
> >
> > Same here.
>
> Just like above, we only know that it couldn't get us what we need.
> There isn't anything we can do.

I'd force the status to disabled here as well.

>
> >
> > > + else if (obj->integer.value == 1)
> > > + drm_priv_scrn->hw_state = drm_priv_scrn->sw_state =
> > > + PRIVACY_SCREEN_ENABLED;
> > > + else
> > > + drm_priv_scrn->hw_state = drm_priv_scrn->sw_state =
> > > + PRIVACY_SCREEN_DISABLED;
> > > +
> > > + ACPI_FREE(obj);
> > > +}
> > > +
> > > +static int
> > > +chromeos_priv_scrn_set_sw_state(struct drm_privacy_screen *drm_priv_scrn,
> > > + enum drm_privacy_screen_status state)
> > > +{
> > > + union acpi_object *obj = NULL;
> > > + acpi_handle handle;
> > > + struct device *priv_scrn = drm_priv_scrn->dev.parent;
> > > +
> > > + if (!priv_scrn)
> > > + return -ENODEV;
> >
> > This should not happen regardless.
>
> Ack, will remove.
>
> >
> > > +
> > > + handle = acpi_device_handle(to_acpi_device(priv_scrn));
> > > +
> > > + if (state == PRIVACY_SCREEN_DISABLED) {
> > > + obj = acpi_evaluate_dsm(handle, &chromeos_priv_scrn_dsm_guid,
> > > + PRIV_SCRN_DSM_REVID,
> > > + PRIV_SCRN_DSM_FN_DISABLE, NULL);
> > > + } else if (state == PRIVACY_SCREEN_ENABLED) {
> > > + obj = acpi_evaluate_dsm(handle, &chromeos_priv_scrn_dsm_guid,
> > > + PRIV_SCRN_DSM_REVID,
> > > + PRIV_SCRN_DSM_FN_ENABLE, NULL);
> > > + } else {
> > > + dev_err(priv_scrn, "Bad attempt to set privacy-screen status\n");
> > > + return -EINVAL;
> >
> > Print state to aid in tracking bugs?
>
> Ack, will do.
>
> >
> > > + }
> > > +
> > > + if (!obj) {
> > > + dev_err(priv_scrn, "_DSM failed to set privacy-screen state\n");
> >
> > Can we print ACPI-specific error?
>
> AFAICS, we do not know what went wrong. The method gives us a NULL
> (meaning something went wrong) or a value which means all is OK. I do
> see that acpi_evaluate_dsm() prints something in case of failure, in
> case that si what you were looking for..

I see that acpi_evaluate_dsm() already provides diagnostic, so you can
ignore me here.

>
> >
> > > + return -EIO;
> > > + }
> > > +
> > > + drm_priv_scrn->hw_state = drm_priv_scrn->sw_state = state;
> > > + ACPI_FREE(obj);
> > > + return 0;
> > > +}
> > > +
> > > +static const struct drm_privacy_screen_ops chromeos_priv_scrn_ops = {
> > > + .get_hw_state = chromeos_priv_scrn_get_hw_state,
> > > + .set_sw_state = chromeos_priv_scrn_set_sw_state,
> > > +};
> > > +
> > > +static int chromeos_priv_scrn_add(struct acpi_device *adev)
> > > +{
> > > + struct drm_privacy_screen *drm_priv_scrn =
> > > + drm_privacy_screen_register(&adev->dev, &chromeos_priv_scrn_ops);
> > > +
> > > + if (IS_ERR(drm_priv_scrn)) {
> > > + dev_err(&adev->dev, "Error registering privacy-screen\n");
> > > + return PTR_ERR(drm_priv_scrn);
> > > + }
> > > +
> > > + dev_info(&adev->dev, "registered privacy-screen '%s'\n",
> > > + dev_name(&drm_priv_scrn->dev));
> >
> > I don't think we need be this noisy.
> >
>
> This can help us track the probe deferral related bugs (and whether it
> is too bad). Yes, we have a probe deferral with these patches.
> Essentially I wanted these prints because they can be taken as markers
> to determine how much delay is the probe deferral costing us.

I am sure you can get boot timeline with debug initcalls option. Then
you will see when this module was initialized vs i915.

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2021-12-20 23:08    [W:0.462 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site