lkml.org 
[lkml]   [2021]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/1] hwmon : (mr75203) fix wrong power-up delay value
On Sun, Dec 19, 2021 at 01:22:39PM +0300, Arseny Demidov wrote:
> In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256,
> the correct value should be 0x100. The register ip_tmr is expressed
> in units of IP clk cycles, in accordance with the datasheet.
> Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100.
>
> Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
> Signed-off-by: Arseny Demidov <a.demidov@yadro.com>

Applied.

Thanks,
Guenter

> ---
> drivers/hwmon/mr75203.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
> index 868243dba1ee..1ba1e3145969 100644
> --- a/drivers/hwmon/mr75203.c
> +++ b/drivers/hwmon/mr75203.c
> @@ -93,7 +93,7 @@
> #define VM_CH_REQ BIT(21)
>
> #define IP_TMR 0x05
> -#define POWER_DELAY_CYCLE_256 0x80
> +#define POWER_DELAY_CYCLE_256 0x100
> #define POWER_DELAY_CYCLE_64 0x40
>
> #define PVT_POLL_DELAY_US 20

\
 
 \ /
  Last update: 2021-12-20 22:03    [W:0.041 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site