Messages in this thread | | | Date | Mon, 20 Dec 2021 19:47:15 +0100 | Subject | Re: [PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function | From | Paul Menzel <> |
| |
Dear Sean,
Am 20.12.21 um 18:52 schrieb sean.wang@mediatek.com: > From: Sean Wang <sean.wang@mediatek.com>
>> Am 18.12.21 um 02:08 schrieb sean.wang@mediatek.com: >>> From: Mark Chen <mark-yw.chen@mediatek.com> >>> >>> For MediaTek chipset, the driver has to issue the specific >>> command to enable Bluetooth SCO support over the I2S/PCM >>> interface. >> >> Please document the datasheet name, revision and section, where >> this is described. > > the datasheet is not released in public so Mark and I cannot provide > the detail here, but we will make the patch easy to review and > understand.
Too bad. The name and revision of the datasheet would still be good to have documented.
>> Please add how SCO support can be tested. Are all Mediatek chipsets >> supported? > > the SCO profile was tested by setting up a VOIP application, > connected to HFP device, checked telephony function can work > normally. > > currently, SCO is only supported by mt7921, we will change the > subject to "Bluetooth: mt7921s: Enable SCO over I2S function" to > avoid any misunderstanding.
Thank you.
I also saw a linux-firmare patch updating the firmware. If a specific firmware version is required, please mention it too.
[…]
Kind regards,
Paul
| |